Aquatreat bvba products

AQUATREAT 002 is our most widely used and high performance product for cooling water treatment. This is a unique composition for avoiding scale, corrosion and biofilm with just one product.

AQUATREAT 009 is a phosphorus-free lime[1] dispersant, corrosion-inhibiting and biofilm-preventing product for use in cooling water.

AQUATREAT 072 is a lime[1] dispersant, corrosion-inhibiting and biofilm-preventing product for use in cooling water with a low phosphorus content.

AQUATREAT 522 is an ultra high concentrated blend of strong dispersants and sequestrants that will avoid, reduce and even remove deposits of inorganic and organic nature such as calcium carbonate, calcium sulphate, magnesium hydroxide, silicates, mud and silt in reverse osmosis membranes and thermal desalination units. AQUATREAT 522 can also be used in boilers, scrubbers and cooling water to keep them free of deposits.

AQUATREAT 535 is a phosphorus-free antiscalant for reverse osmosis or nanofiltration. Due to its unique composition and based on a new polymer technology, the formation of inorganic and organic deposits will be prevented. AQUATREAT 535 is NSF certified.

AQUATREAT 559 is a liquid product composed of various polymers, sequestering agents and a reducing agent[1] to neutralize the oxidizing agents present. 1 mg/l AQUATREAT 559 is sufficient to neutralize 0.05 mg/l of free chlorine. AQUATREAT 559 is NSF certified.

Scrubbers remove unwanted particulates out of the gas phase with a liquid. To realise the transfer a continu reverse current of gas and liquid is neccesary. The most common problems on these scrubbers are usually deposits of calciulmcarbonate or biofouling. To prevent these problems an antiscale can be used. For a summary of the technical and safety documentation of our products

Air stripping or plate aerators remove volatile contaminants out of the liquid phase ( VOCl’s) because there is a transfer from liquid to gas phase. The most common problem on plate aerators is scaling of calcium carbonate and iron. To prevent this problem it is possible to continue dose an anti-scale product. These products are a safer option for the environment and people then common used dosing of a strong acid . For a summary of the technical and safety documentation of our products

In the purification of industrial and domestic waste water coagulation and flocculation are important steps. These steps are responsible to create a good flocculation of the macroscopic particles which increases the efficiency and rate of the sedimentation. For an optimal process the choice of the proper coagulant and flocculants is of great importance. There is a wide variety in these products based on the type of charge (anionic or cationic), the charge density and the average molecule weight of the polymer. The efficiency of coagulant-flocculants is strongly influenced by the kind and composition of the waste water.