Asiatic Fire System Pte Ltd products
KILLFIRE - Fixed Continuous Hose Reel
KILLFIRE Heavy Duty Continuous Flow Hose Reel are designed for immediate and continuous flow of water at all times, eliminating the need to unwind the hose before activation. Units are intended to use with non-collapsible hose and fitted with a combination Jet / Spray Nozzle. Option: Galvanised Steel or 316SS Stainless Steel
KILLFIRE - Portable Continuous Hose Reel
KILLFIRE Portable Continuous Flow Hose Reel are designed for immediate and continuous flow of water. It can be easily be wheeled to any location to supplement existing fire protection. Unit of 0 25 mm are intended for use with non-collapsible hose, up to 45 m and fitted with a Jet / Spray Nozzle. It is recommended to fit a flexible connection between swivel joints and inlet pipe to avoid damages.
Fire Extinguisher
Sales & services for a wide range of approved fire extinguisher. Manufactured in accordance with BSEN 3: 1996. Performance have been proven with many thousands installed.Fire Hose Reel
A KILLFIRE Swing Type Fire Hose Reels are designed for mounting on a flat wall where access is limited, or in a recess or cabinet. They can be used without alteration for mounting with inlet to left or right of the reel. Both types have two different sizes of inlet. The 20mm Diameter for use with 20mm diameter non-kinkable fire hose only and 25mm diameter for use with 25mm diameter nonkinkable fire hose.Fire Hose Reel [BSEN]
A KILLFIRE Swinging Type Fire Hose Reels are designed and tested to BSEN 671 for reliability, performance, ease of installation. They can be used without alteration for mounting with inlet to left or right of the reel. Units are tested to 20 bar without any sign of leakage or visible distortin in any part.Dry Riser Systems
A KILLFIRE Dry Riser Systems provide fire protection for high rise buildings, where main pressure are not sufficient in normal fire fighting application. Systems are installed in staircase or other uitable location, with each riser valve on each floor and inlet breeching of either 2-way or 4-way at ground level to enable fire brigade to connect into the systems. Such breeching inlet are generallyhoused in cabinets for protection.Breeching Inlets - 2 Ways
KILLFIRE Breeching Inlets are installed in front of building where fire engine are accesible to feed water into riser systems via their Ø21/2” fire hoses. Riser systems of Ø150mm are installed with a 4 way breeching inlet that are manufactured and tested BS 5042.Fire Hydrant Valves
KILLFIRE Fire Hydrant valves are manufactured to BS5041 and available with flanged or screwed inlet, male or female instantaneous to BS 336 outlets. All valves are tested to 250PSI and is available in size of 40mm, 50mm and 65mm valve. Flanges to specify when ordering.Standpipe And Underground Hydrant
A KILLFIRE Double Way Standpipe are made of either light alloy or brass with inlet to 65mm female V or round thread, and outlet with double 65mm female instantaneous swivel outlet, cap and chains.Fire Fighting and Protection System
Ozone Friendly Clean Agent Fire Suppression System
FS 49 C2, also known as a clean agent due to its ozone friendly properties, was recently introduced as a replacement for Halon 1301 agent, which have been deemed environmentally unfriendly by "The Montreal Protocol on Substances that deplete the Ozone Layer". Being compatible with Halon systems, FS 49 C2 may be used in existing Halon systems by replacing and upgrading the Halon system. The advantages of using this clean agent system are its quick acting abilities to suppress fires, a favourable weight/volume ratio and most importantly, it is not a health hazard at working concentration.