Atlantic China Welding Consumables, Inc. products

It is used for fabricating important structures made by equivalent tensile strength mild steels or low alloy steels, such as bridges, lifts, vehicles, constructions, heavy machinery and so on. The weld metal has good performance of mechanical properties and crack resistance.

E7016 welding rod is used for fabricating important structures made by equivalent tensile strength mild steels or low alloy steels, such as bridges, lifts, vehicles, constructions, heavy machineries and so on. The weld metal has good performance of mechanical properties and crack resistance.

6010 Welding rod is mainly used for backing welding of substrate, root passes, filler and cosmetic welding of mild steel pipes. It could be fashioned by one-side welding with back formation. And good condition of packaging and storage for E6010 welding rod is very important. Normally it does not need to re-dry. When it is damped seriously re-bake it at the temperature of 70? – 80? for 0.5 – 1 hour before welding. To increase the performance of welding, when using 5.00mm diameter one, bigger thrust and smaller current are recommended.

E71T-1C-J welding wire is used for welding structures fabricated by mild steels and 490MPa grade high tensile strength steels, such as ships, offshore platforms, pressure vessels, pipes and so on. The weld metal has good plasticity and low temperature impact toughness.

E71t-1M is designed for mixed gas and it has good welding performance even vertical down welding could be applied. It is widely used in structures fabricated by mild steels and 490MPa grade high tensile strength steels, such as ships, pressure vessels, machineries, petrochemical industry equipments, bridges and so on.

ER308L welding wire suitable for extra-low carbon stainless steel and it has excellent performance of resistance to intercrvstalline corrosion. It is widely used for welding structures of facilities of synthetic fibre industry, fertilizer industry and petrochemical industry that fabricated by 00Cr19Ni10 stainless steel. Also it can be used for welding 0Cr188Ni10Ti stainless steel structures, which work temperature below 300?.

ER70S-6 welding wire has very good welding performance and the weld metal show lower temperature impact toughness. It is mainly for butt and fillet welding structures made by shipping steels and low alloy steels, such as ships, containers, vehicles, engineering & construction machinery and so on.