Ausonia S.r.l. products

Vertical closed-side hydraulic compactor with closed-door binding, for the compaction of recyclable material such as: paper and cardboard, plastics, shrink wraps, nylon, waste in general. Equipped with two strapping reels and needle to run the strap.

Vertical closed-side hydraulic compactor with closed-door binding, for the compaction of recyclable material such as: paper and cardboard, plastics, shrink wraps, nylon, waste in general. Equipped with trolley for handling bales, reel holder, two of strapping reels and needle to run the strap.

The most popular and versatile compactor machine; its loading aperture enables many types of material, such as paper, cardboard, plastic, PET bottles, textiles in general, tin, tin cans, drums, etc. without difficulties.

MG 18 T.V.E. compactor machine has a completely closed chamber, openable are: the front loading door and the bale ejection door, it is equipped with a mechanical material retaining device, visual indicator of bale ready for binding, automatic bale ejection by belt, reel holder with 4 reels supplied. Binding is done in open doors using high-strength polypropylene twine.

Compared to MG 25 T.V.E. this machine has the compaction chamber bigger, is then able to produce bales very heavy. It is especially suited to large volumes of plastic, paper and cardboard.

Vertical hydraulic compactor MG 50 T.V.E. for formation and baling of waste and recyclable material such as cardboard, nylon plastic, big-bags, fiber glass and insulation in general, PET bottles Tetrapack, leather rags, generic trash etc... MG 50 TVE has the compaction chamber completely closed, loading door and bale expulsion door are openable. The electrical panel is positioned in high, the control buttons are located on the side. It is front-loaded.

The structure of the machine is in sheet metal and welded metal sections, in order to operate in the toughest conditions. The parts most subject to wear are constructed in material antiusury with the possibility of replacement. The cycle production is controlled by a PLC installed on the electrical panel which means electromagnetic sensors or lighting controls the hydraulic actuation of the pressing surface, determines the introduction of needles and tying wires acting on its electric motors by means of a hydraulic device also responsible for the cutting of the wire. The machine is equipped with a system of double guillotine for the slice of material to be compacted. The pressing speed is made by the double pump according to the resistance by the material to be compacted, this allows greater performance and better quality. A small opening with safety switch allows manual entry of material at head height. The body machine is slightly raised off the ground to allow easy cleaning.

Horizontal hydraulic compacting machine for compacting and shaping bales or recyclable materials such as: cardboard paper, nylon plastic, big-bags, fibre-glass and insulation in general, PET and tetrapak bottles.

Hydraulic compactor machine for crushing metal drums up to the 30-litre size. Complete of tank for the collection of liquids.

Compactor machine is designed for volume reduction of 200-litre metal drums and 25-litre bins. Dimension of drums crushed 100/150 mm.