BAGO products

Litter Pick Bag Holder, for fast loading by Litter Plier eliminating the familiar problem of trying to hold open and load a sack. The inset hand hold of the frame provides a comfortable grip even when carrying a fully loaded sack. The bag is firmly trapped onto the frame by a flexible tubular ring. The frame is formed in rigid PVC, the bag retainer tube is thermoplastic rubber. Suitable for bags/sacks with a neck width of 570mm.+, sack change can be effected with ease in less than 30 seconds. To facilitate litter segregation for re-cycling a second smaller bag can be fitted inside the first and stretched across the centre of the opening. As standard: frame colour is black with red or green bag-retainer-tube; white with a green tube is also available.  Opening perimeter: 110cm., height 30cm. width 33cm. Weight 350 grammes.

B05DS110 and heavy duty framed B06DS110 are both lightweight easily carried bag-holders designed for direct sweep with a 12” broom; One corner of the sweep plate is restrained by the operators boot. By eliminating the shovel it becomes particularly useful in windy conditions. Bag change should take less than 30 seconds.

Litter Pliers fitted with SCoops enable faeces to be contained and transferred directly into a bag or bucket. For individual disposal a bag may be  fitted over the twin-bucket ends prior to engaging with the offending deposit. With the scoops now closed and the deposit contained, the open end of the bag is reversed, the scoops  opened and the base part of the bag removed with deposit enclosed. Overall height 24”- 31”. SCoops are 110mm.wide

Litter Plier: BLP1NC-5A.GT2 orange. Configured to spring to the closed position it is designed for use with Extension handles or Sky Plier-2 . It is fitted by entering the tapered thread-end of the extension handle into the Litter Plier handle-socket, with a push and clockwise twist action.

BHFSC-40_litre  is a hands-free refuse sack carry system. Supported by the reflective shoulder strap and optionally restrained by a similarly reflective waist belt. The durable rip-stop support bag has a full length zip such that the loaded liner sack can be dropped to the ground, without lifting it out, and for ease of cleaning. The liner sack is simply and quickly fitted by opening and pushing the closed end down into the support bag. The perimeter of the open end of the liner sack is rolled over the top of the support bag and tucked under as shown. The waist belt is not part of the standard supply as it proved to be too restrictive in working environment. We also have  cut material for a smaller shallower version which would have a capacity of approx. 30-litres.

These Bulk Bag Opening Retainer-frames can be fitted in seconds and will quickly pay for themselves when loading and unloading a bulk/dumpy bag: The simple version 1 (pictured above left) does not actually support the bag (just holds it open) but can give that effect if the bag is folded down, as pictured inset top left. The Bulk Bag Support (pictured right) does support the bag but is time consuming to make. A 90cm.x 90cm. x90cm. bulk-bag is normally included. Price and lead time would depend level at stock, at the time of your enquiry. If we have stock the simple version, shown left, are currently £25.00ea. and the Bulk Bag support shown right would be £50.00ea.

LITTER PLIER BLP3 a slim-line lightweight angled handle Litter Plier suitable for a wide variety of hand sizes.  Available at:  27” and 30” lengths, the shorter the tube length the greater the grip-power and accuracy. For general Litter picking select a Litter Plier length 2” longer than the users palm height to ground or be prepared to bend a bit. Standard gripper fitment is the 32mm.wide polyurethane  GT2 grip; a 50mm. CUP grip is available for golf-ball or dune-beach work. Weight = 380g - 410g.

BLP4 is a mid-sized angled handle Litter Plier. Lengths range from 16” to 40” with green or yellow handle. Its standard gripper is the GT2 chisel grip capable of dislodging lightly adhered pavement deposits, retrieving cigarette ends and straws from between pavement gaps and makes easy work of bottles & cans. Weight at 32” length with GT2 grips fitted weight = 420g. (most of weight is the handle) Also available with 50mm.CUPs for golf-ball and dune-beach work or 110mm. wide poop- SCoop buckets or 240mm. P24 leaf grabs.