22 products found

products

Dry Collector
CycloPlus™ - Cyclone Dry Particulate Collector

The CycloPlus collector is an advanced cyclone design scrubber that offers high retained solid particulate collection as either a primary particulate device for dust removal or recovery or to act as a precleaning stage ahead of a fabric filter collector or wet scrubber to reduce particulate loadings and to increase fabric filter life or reduce scrubbing liquid blowdown.
Wet Scrubber
Bionomic - Model 5000 Series - Counter-Current Packed Tower Fume Scrubber

Bionomic counter-current packed towers are the ideal solution to air pollution problems associated with the removal of corrosive vapors, unwanted mists, noxious and odoriferous gases. By creating a counter-current flow between contaminated gases and scrubbing liquid throughout a high surface area packed bed, rapid and uniform absorption of pollutants is achieved with maximum efficiency. Series 5000 towers are designed to accept a wide variety of...
Bionomic - Model 5500 Series - Cross-Flow Scrubber

The Series 5500 Crossflow Scrubber's low profile lends itself to applications where there is a height restriction or esthetic concern such as indoors or building roof tops and the contaminant to remove is a toxic fume, gaseous pollutant, mist or odor that requires a chemical reagent scrubbing solution. This horizontal packed bed scrubber utilizes a crossflow contact pattern between the gas and scrubbing solution.
Bionomic - Model 6500 Series - Jet Venturi Scrubber

The ideal scrubber selection for low to moderate gas volumes when gaseous and or particulate contaminant removal is required. The Series 6500 Jet Scrubber creates its own draft to eliminate the need for a fan in most cases realizing cost savings and system simplification. Inherent with this design, gas is scrubbed with no bypass resulting in a scrubber that can be used for large turndowns in gas flows. The Jet scrubber utilizes a...
Bionomic - Model 7000/8000 Series - Gas Scrubber / Venturi Scrubber

The extremely efficient gas atomized Series 7000 and 8000 Venturi Scrubbers are the best choice for applications requiring the removal of smaller micron and submicron size particulate down to 0.2 microns and meeting EPA classified PM 10 and PM 2.5 standards. Soluble or chemically reactive gaseous contaminants are easily removed with these highly efficient devices. Both Series 7000 Rectangular and Series 8000 Annular throat units feature...
Model 9000 Series - Mist Removal / Preformed Spray Scrubber

A major advancement in cyclonic scrubber technology, the Series 9000 Mist Removal | Preformed Spray Scrubber is capable of outperforming venturi scrubbers on an energy cost basis for collection of particulate in the 2 micron and larger size range and simultaneous removal of gaseous pollutants.The Series 9000 Mist | Preformed Spray Scrubber incorporates a unique specially designed gas entrance involute section fitted with proprietary reverse jet sprays...
Model 9500 Series - Spray Tower Acid Gas Scrubber

Specifically designed to treat acid gas emissions from particulate laden combustion flue gas, the Series 9500 Spray Tower Srubber is an extremely simple acid gas scrubber device capable of over 98% control efficiency. The scrubber consists of a fully open vertical vessel fitted with banks of hydraulic atomized spray nozzles. Nozzles feature an ideal droplet size distribution to achieve maximum mass transfer efficiency with a special non fouling...
RotaBed - Fluidized Bed Scrubber System

The patented RotaBed™ Fluidized Bed Scrubber represents a major breakthrough in ultra high efficiency gas absorption and particulate collection in a space saving non fouling design. RotaBed is the ideal technology for applications involving particulate laden gas streams or when handling high solids content or scale forming scrubbing liquids. The key to the RotaBed's superior performance is a unique swirl induced Coriolis grid that achieves much...
BFCS - Bionomic Forced Condensation Scrubbing System

The highly advanced Bionomic Forced Condensation Scrubbing System (BFCS) uses the principles of nature’s rain and particle growth mechanism to achieve dramatic improvements in collection of submicron particulate over conventional hot gas wet cleaning systems. In addition, secondary acid gas pollutants are also easily removed with the BFCS Technology. Substantial energy savings combined with high collection efficiency is the cornerstone of the...
Hi-TScrub - Thermal Oxidizer Scrubber Systems

Hi-TScrub Thermal Oxidizer combined systems employ our advanced horizontal or vertical configuration atomized spray and venturi gas quenchers to cool corrosive hot gas streams up to 2,600°F before scrubbing. Cooled gas with acid vapors or particulate is then removed with a Series 5000 Packed Tower or Series 7000 Venturi Scrubber. All units are available as 'complete' ScrubPac Custom Skid-Mounted Systems, and the scrubbers are ideal for treatment...
Packaged Scrubber Systems - ScrubPac
ScrubPac™ - VentClean™ System for Tank Vent Scrubbing

Bionomic Industries exclusive VentClean Scrubber is specifically designed to scrub storage tank and railcar vent emissions caused by breathing and filling operations, and is the latest edition to our enormously successful ScrubPac family of 'packaged' scrubber systems.
ScrubPac™ ProClean - Model CT - Self-Contained Compact Packed Tower Scrubbing System

A fully self-contained compact packed tower scrubbing system, the ProClean Type CT requires minimal field labor to install and dramatically reduces erection time and related costs. Available in two size range configurations. The system incorporates Bionomic's field-proven Series 5000 Counter Current Packed Tower Scrubber integrally packaged with recirculation pump, piping, instrumentation and controls – specifically engineered for high...
ScrubPac™ - Custom Packaged Scrubber Systems

ScrubPac™ is the only available scrubber system that delivers applications specific engineering in a highly cost effective, Custom 'packaged' skid mounted design. Fully run tested before they arrive on site, ScrubPac Systems require only minor assembly and process and utility connection hookups to become operational.
Wet/Dry Electrostatic Precipitator
Bionomic HEI - Wet Electrostatic Precipitator System

The Bionomic HEI™ (High Energy Ionizer) Wet Electrostatic Precipitator System represents a major breakthrough in the advancement of state-of-the-art fine particulate control. Centered around precipitator hardware improvements that deliver high reliability and outstanding collection performance, the HEI™ WESP System incorporates a unique discharge electrode technology that can be sized to specific applications. The system's electrode...
ECharge - Electrostatic Precipitator

Features a Highly Efficient Design for Maximum Process or Indoor Air Pollution Control: The economical Bionomic ECharge Electrostatic Precipitator is able to achieve extremely high removal efficiency on small micron and submicron particulate to easily meet PM 2.5 environmental regulations. Opacity problems associated with smoke-type submicron particles, droplets, and aerosols are easily solved along with odor issues caused by these particles.
Dry Scrubber
Bionomic Dri-Scrub - Dry and Dry/ Wet Combination Scrubber Systems

Bionomic Dri-Scrub Dry and Wet/Dry Combination Scrubber Systems are available for gas flows from 160 to 75,000 acfm, provide particulate collection efficiencies between 98 and 99.9% on most applications, and are normally used for scrubbing fine particulate with acid gases. Dry systems utilize a dry venturi scrubber for rapid mixing of the containment gas with a sorption reagent and are followed by a pulse jet fabric filter collector to capture...
NOx Control Chemistry
BIONOxSOLVER - NOx Scrubbing System

BIONOxSOLVER is the first major breakthrough process NOx control chemistry to greatly simplify wet scrubbing system operation and dramatically reduce scrubber system complexity and costs. This special proprietary formulation of powerful nitrogen dioxide reducing agents can achieve over 33% greater removal efficiency with one simple chemical addition. Unlike typical NOx sulfide reduction chemistry, low toxicity BIONOxSOLVER...
Bioscrubber and Biofilter
BTIP - Bioscrubber and Biofilter

BTIP extends the capabilities of natural biological treatment of gaseous organic compounds, hydrogen sulfide, odors and more with increased removal efficiency while simultaneously removing particulate if present. A unique combination of proprietary mist scrubbing, bio-scrubbing/filtration and aerobic digestion offers lowest maintenance and operating costs with self-cleaning media and nearly nonexistent chemical reagent requirements. Systems are...
Chemical Recovery / Production Systems

Capture and Reuse Gas Stream Pollutants with Modular Recovery Systems. There are dozens of applications and products that meet the gas composition and other criteria needed to enable an economical recovery solution. Recovery of scrubbed products and by-products can be the best most cost effective viable option to meet emission standards. It also allows recycling and reuse of the scrubbed product to save the cost of liquid waste stream treatment....
Supplemental Accessories
Bionomic - Complete System Components

Whether you purchase one of our stand alone scrubbers or a waste heat recovery unit, leave it to the experts at Bionomic Industries to provide all the accessories and components needed to ensure a truly reliable trouble-free operating system. Backed by our many years of experience in providing engineered systems, our staff of competent qualified engineers can provide all the necessary components seamlessly integrated and fully matched to meet the...
ScrubSeal - Vacuum Overflow Valves

New Bionomic ScrubSeal Vacuum Overflow Valves are the perfect overflow and vacuum seal solution to replace troublesome manometer water seal legs on scrubber sumps. Designed to eliminate unreliable, cumbersome manometer piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum during normal non-flow...

Products by NESTEC, Inc.

Auxiliary Clean Air Solutions
NESTEC - Particulate Control Systems

For more than two decades, NESTEC has been supplying prepackaged and skid-mounted particulate control equipment in conjunction with our thermal oxidizer technologies for a wide range of airborne particulate pollution control and product recovery applications. These technologies include venturi scrubbers, wet electrostatic precipitators (WESP), fabric filters (baghouses), cyclones, and mist eliminators as required. NESTEC has also formed a strategic...

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.

products

Dry Collector

Wet Scrubber

Packaged Scrubber Systems - ScrubPac

Wet/Dry Electrostatic Precipitator

Dry Scrubber

NOx Control Chemistry

Bioscrubber and Biofilter

Supplemental Accessories

Products by NESTEC, Inc.

Auxiliary Clean Air Solutions