BIOPAC Systems Inc. products

The BIOPAC MP160 system is a flexible, proven modular data acquisition & analysis system for life science research. This 16-channel system includes AcqKnowledge software with specialized analysis capabilities. Applicable to over 40 research fields, new modules are available for electrogastrogram, micro-electrode recording, noninvasive blood pressure measurement & electrical bioimpedence (cardiac output), and others. To facilitate the discovery process and help ensure reproducible, publishable data, powerful automated analysis routines are available for ECG, HRV, EEG, EMG, EGG, and many more.

MP160 data acquisition and analysis systems with AcqKnowledge software provide a flexible tool for life science research. MP160 data acquisition workstations include all hardware, software, cables, and guides you need to get started.

Use for remote event marketing or to externally trigger data acquisition for psychophysiological response tests. Monitor switch data as a digital input channel. Interface with the I/O port on the rear of the MP36/35 unit for digital input. Independently mark events, or provide responses, on up to eight channels simultaneously. Assign separate digital channels as event markers for individual analog input channels. Easily customize the switch indicators by inserting parameters into the label sleeve on the front of the unit.

Tri-axial Accelerometers connect directly to the MP3X unit to provide three outputs, each simultaneously measuring accelerations in the X, Y, and Z directions, requiring no additional amplification. One input channel is required for each output—three input channels are required to measure each axis simultaneously. The accelerometers have a frequency response which extends from DC to 500 Hz. They are extremely accurate and can be easily calibrated by simply changing the orientation in three dimensional space, so that gravity (G=1) acts only upon the desired axis.

Low Flow Resistance With High Filtration Efficiency. Use this disposable bacteriological filter with integrated mouthpiece to protect subjects and equipment. AFT36 is intended for use with only SS11LB—35 mm outer diameter fits directly on the outside of the SS11LB airflow head.

Disposable bacteriological filters for use with 22 mm breathing circuits, such as BIOPAC pneumotach transducers SS11LA, TSD117, or SS11. These filters remove airborne bacteria. Pore size—VFE: 3.1 micron; BFE: 2.8 micron.

These pre-gelled disposable electrodes have a circular contact and are most suitable for short-term recordings, including surface EMG, ECG, EOG, etc. The small vinyl backing allows close electrode placement where necessary, and a slightly less firm adhesive allows “ouchless” removal. The electrodes incorporate liquid electrolyte gel and moderately-high chloride salt concentration for quick, accurate readings. These disposable snap electrodes provide the same signal transmission as reusable electrodes, with added convenience and hygiene. Each peel-and-stick electrode is pre-gelled and designed for one use only. EL503 electrodes do not contain any latex. Quantity options: 100 or 1,000.