Boa Recycling Systems B.V. products

Over the past three decades many hundreds of Continette baling presses have been sold worldwide. Almost all of them are still performing today. Like all BOA baling presses, the Continette is a real workhorse. Reliable, robust, strong and easy.

The BOA Baseline is an easy to use and reliable baling press, producing evenly formed bales at low operating costs. Not being pretentious, just doing what it’s made for: straightforward baling!

Baling press constructed as a cutting press with an automatic binding system and hydraulic counter press channel for fully automatic bale production. The vertical prepress flaps in the filling openingf the pressclose simultaneously, resulting in a closed press channel.Because of this, optimal-weight homogeneous bales areproduced without cutting being necessary. These flaps hve been built in such a way that any impactingforces are efectively absorbed. The front flap is smalle in view of the distribution of forces, and is equipped with a toothing, so that material between the flaps can be cut. The rear flap is equippedwith a fallback mechanism and  an anti-blockage switch, which minimizes interventions.

Baling press constructed with one prepress flap, automatic binding system and hydraulic counter press channel for fully automatic bale production. The vertical prepress flaps in the filling opening the pressclose simultaneously, resulting in a closed press channel. Because of this, optimal-weight homogeneous bales are produced without cutting being necessary. These flaps have been built in such a way that any impacting forces are effectively absorbed. The front flap is small in view of the distribution of forces, and is equipped with a toothing, so that material between the flaps can be cut. The rear flap is equipped with a fallback mechanism and an anti-blockage switch, which minimizes interventions.

Baling press constructed with vertical pre-press flaps, automatic binding system and hydraulically functioning counter press channel for a fully automatic production of bales.

Recycling cardboard is essential in today’s society. Having the right equipment is a must. This is where we come in. At BOA Recycling Systems, we have years of know-how and experience in this field. Our shredders have the ability to recycle any type of cardboard.

Our automatic bag opener machine can be fed from a conveyor belt, grabber or shovel with bags. The bags fall onto a drum fitted with hammers. The slowly revolving drum takes the material along an adjustable comb which is also fitted with sturdy hammers. The space between the comb and the drum can be easily adjusted by means of spindles which makes it easy to process several types of material: large bags, small bags, bales of paper or plastic material etc. After opening the bags, the material will fall from the bottom of the machine onto a conveyor or into a chute.

Our reel splitter is operated by a PLC control. On the front panel of the control box is a two-hand push button control, which lowers the blade. Extra safe, because the cutter cannot be operated with one hand. Do you need to stop the splitting machine immediately? Press the emergency stop button and the machine turns off straightaway and the blade returns to the top. Installation of our reel splitter is easy as it does not need special foundations and can be height-adjusted by means of adjustable feet.

The chain conveyor consists of a stable open-frame structure of profiled steel and sheetwork and a drive and tightening section. The sides of the above-ground section are covered with removable plates, making the chain easily accessible for maintenance purposes. The 6 mm thick rubber transport belt is attached to cylindrical profiles installed between two transport chains. A special guide rail on each cylinder protects the chain from lateral forces. The raised sheet edge of reinforced steel sheet is composed of removable sections of 1500 mm in length. The KTH can be installed in the floor or above-ground.