Conveyor Components Company products

The Model RS is a heavy-duty safety control that provides a positive shut off of dangerous equipment in an emergency. A cable pulled by endangered personnel actuates the control. The output contacts of the Model RS-2 can control up to two separate circuits, one for machinery shutdown and one for an alarm.

The Model RSB is a heavy-duty safety control that provides a positive shut off of dangerous equipment in an emergency. A cable pulled by endangered personnel actuates it. The output contacts of the Model RS can control up to two separate circuits, one for machinery shutdown and one for an alarm.The Model RSB has the built-in advantage of cable break detection.

The Model SBR is a"small-sized"motorized brush style conveyor belt cleaner for use in heavy-duty quarry and mining applications to reduce the carryback of material. The Model SBR will work in wet or dry applications, as well as on a variety of organic materials and metal fines. The powered brush turns in the opposite direction of the belt in order to throw the dislodged material back into the discharge stream.

The Model BR is a motorized brush style conveyor belt cleaner for use in heavy-duty quarry and mining applications to reduce the carryback of material. The Model BR will work in wet or dry applications, as well as on a variety of organic materials and metal fines. The powered brush turns in the opposite direction of the belt in order to throw the dislodged material back into the discharge stream.

The NEW Model CT comprised of a Control Unit and Tilt Probe senses the presence or absence of material. The new intrinsically safe, cULus Listed Control Unit is enclosed in rugged cast aluminum housing with LED Indicator lights and surface mount printed circuit board.  Weatherproof, Dust-Ignition Proof and Explosion Proof models are available. The rugged steel sensing Probes are cULus listed as intrinsically safe when used with the new cULus Listed Model CT Control Units CT-105, CT-106 or CT-107.

The Model DLC is a flush mount, pressure activated, diaphragm style level control and plugged chute detector.  The model DLC has 2 dry (unpowered) microswitches that activate when material within the bin or chute presses upon the diaphragm face.  The unit should be mounted on the vertical side wall of the bin, hopper or chute.  The unit may also be mounted on the sloped portion of the chute (as long as material flows freely or does not "bridge").

The Model AD is an aeration pad or diffuser that is used to provide a means of introducing low pressure air into a dry bulk material that has become compacted due to settling. The air will help restore the material`s natural ability to flow.

The Model CMS is a direct drive control that indicates when rotating equipment has ceased to turn. The output contacts of the Model CMS can control up to two separate circuits, one for machinery shutdown and one for an alarm.

The Model SC skirtboard clamp forms the basis for a dust containing system that doesn`t allow material to leave the edges of the conveyor belt.

The Ready Gate is an adjustable self-closing safety fall protection gate. Federal regulations require any walking surface above 4 feet (48") to be guarded by guardrail systems. Any openings in the guardrail system must be protected by an offset guardrail or aself-closing safety gate. The Model RG (Ready Gate™) adjustable self-closing safety gates meet current OSHA 1910 Subpart D and ANSI-A1264.1-2017.