Copersa products

3 mm mesh filter (3,000 microns - 5 mesh) to be installed in line as a roughing filter for the separation of coarse particles (stones, wood, shells, etc.) upstream of an automatic head. Its use is recommended in facilities that do not have a suitable set of pre-filters in the suction of pumps that suck from rivers or similar (see series 18100).

Vertical filter mesh used as a safety filter. Equipped with one or two screens (DS models) Stainless steel 110 microns (140 mesh), two pressure for pressure gauge skewer and manual drain key. It is installed vertically.

Automatic hydraulic filter with suction cleaning system by means of the pressure of the network and without interruption of the filtration process. It works with a 6VDC battery-powered programmer and optionally 230 / 24VAC. Includes stainless steel mesh on PVC support (P models) with an effective area of approximately 65% of the mesh area, or sintered stainless steel mesh (S models) of 110 microns (140 mesh). Ideal for irrigation and industrial applications where the water comes from a pre-filtered or decanted source.

Automatic hydraulic filter with suction cleaning system by means of the pressure of the network and without interruption of the filtration process. It works with a 6VDC programmer (optionally 230 / 24VAC). Includes pre-filter and stainless steel mesh on PVC support (P models) with an effective surface of approximately 65% of the mesh area, or sintered stainless steel mesh (S models) of 110 microns (140 mesh). Ideal for irrigation and industrial applications.

The most practical, cheaper, more efficient and precise technique to perform oxygenation of musts.