Copper Recovery, Inc.

77 products found

products

  • Wire Choppers / Chopping Lines

  • Copper Recovery - Model Phoenix - Copper Wire Recycling Machine - Mini-Plant

    Copper Recovery - Model Phoenix - Copper Wire Recycling Machine - Mini-Plant

    PHOENIX is a professional turn-key mini-plant with the substantial capacity to process *1,200-2,500 input lb/per hour with mixed cable, depending on size and yield.  Process approximately 120,000 lb/per month with a one-shift operation. This estimate includes maintenance downtime for blade changing and lubrication. The cutting mill is equipped with a premium efficiency IE3 50 hp motor. Add 25% capacity by adding a free standing...

  • Copper Recovery - Model PHOENIX PLUS - Copper Wire Recycling Machine - Wire Chopper Machine

    Copper Recovery - Model PHOENIX PLUS - Copper Wire Recycling Machine - Wire Chopper Machine

    PHOENIX PLUS is a professional turn-key mini-plant with the substantial capacity to process *1,200-2,500 input lb/per hour with mixed cable, depending on size and yield.  Process approximately 150,000 lb/per month with a one-shift operation. This estimate includes maintenance downtime for blade changing and lubrication. The cutting mills are equipped with a premium efficiency IE3 50 hp motor.   This 'PLUS' version adds...

  • Copper Recovery - Model Phoenix XD - Wire Chopping Line with Pre-Shredder and Variable Speed Dosing Silo

    Copper Recovery - Model Phoenix XD - Wire Chopping Line with Pre-Shredder and Variable Speed Dosing Silo

    Double your capacity and halve your manpower with Phoenix XD fully automated wire chopping line.  Our mini-plant, Phoenix, is upgradeable to Phoenix XD at any time with our 'XD Upgrade' module.  You never lose your initial investment if you first purchase Phoenix then decide to upgrade later, in fact over 60% of our customers go this route.  The included Wagner WS30 60 HP Shredder features a large infeed hopper capable of handling...

  • Copper Recovery - Model Phoenix XD PLUS - Wire Chopping Plant Upgrade with Cable Shredder, Cutting Mills and Variable Speed Dosing Silo

    Copper Recovery - Model Phoenix XD PLUS - Wire Chopping Plant Upgrade with Cable Shredder, Cutting Mills and Variable Speed Dosing Silo

    Max out your line capacity with Phoenix XD PLUS fully automated wire chopping line.  Our mini-plant, Phoenix, is upgradeable to Phoenix XD PLUS at any time with our 'XD PLUS Upgrade' module.  You never lose your initial investment if you first purchase Phoenix then decide to upgrade later. The included Wagner WS30 60 HP Shredder features a large infeed hopper capable of handling large coiled material and gaylord quantity loads at a...

  • Individual Machines

  • Copper Recovery - Model CM50-SA - Freestanding Mill

    Copper Recovery - Model CM50-SA - Freestanding Mill

    CM50SA is a 50 horsepower cutting mill or granulator that is suitable for processing insulated copper and or aluminum wire.  This stand alone CM50SA features a forged alloy rotor with heavy duty and unique design.  The mill utilizes scissor cutting action, adjustable rotor knives and includes a jig for pre-setting re-sharpened knives outside the mill for fast and easy maintenance.

  • Copper Recovery - Model CM50 - Bare Cutting Mill

    Copper Recovery - Model CM50 - Bare Cutting Mill

    While the CM50 is designed to fit onto the Phoenix platform, it can also be purchased without a top or bottom hopper, or with a custom designed hopper to suit your application.  This design flexibility allows the CM50 to suit multiple applications and the compact nature of the design offers unique 3rd party integration opportunities.

  • Copper Recovery - Model CM50-T - Dual Cable Granulator

    Copper Recovery - Model CM50-T - Dual Cable Granulator

    Twin CM50's do twice the work!  With smaller wires you can signifigantly increase your throughput by using the CM50T dual granulator configuration.  Available as an a-la-carte machine or integrated into a Phoenix installation, the CM50T boasts 100 horsepower of chopping power in an extremely small amount of floor space!

  • Copper Recovery - Incline Conveyors

    Copper Recovery - Incline Conveyors

    Incline conveyor suited for the CM50 is also available in differenet configurations.  Whether you need a special belt, special length, made from special materials such as stainless steel.  We offer standard and custom conveyors to suit.

  • Copper Recovery - Custom Conveyors

    Copper Recovery - Custom Conveyors

    We can economically produce custom conveyors to suit your specific requirements.  We offer conveyors in carbon and stainless steel with a variety of belt types, sizes, lengths etc., we can do it better for less!

  • Copper Recovery - Magnetic Conveyors

    Copper Recovery - Magnetic Conveyors

    Phoenix utilizes a magnetic separator conveyor at the very last stage to ensure product purity.  The last thing you want is for all your work to be sabatoged by tramp ferrous material making its way into your final product! 

  • Copper Recovery - Model DF18 - Dust Collector

    Copper Recovery - Model DF18 - Dust Collector

    Our DF18 dust filter is available as a stand alone dust collector for multiple applications.  Heavy duty material transport impeller and self-cleaning filter bags by way of integrated vibrator make this one tough filter!  Oversized aluminum alloy dust bin makes taking out the trash easier than ever before! Don't settle for cheap dedusting solutions that use trash bags! 

  • Copper Recovery - Model GS 94 - Gravity Separator

    Copper Recovery - Model GS 94 - Gravity Separator

    Phoenix includes our GS94 Gravity Separator as seen above.  This unique separator offers a flexible way to optimize production.  Three adjustable diverter flaps allow for up to four material output streams which allow the GS94 to uniquely handle comingled aluminum and copper cables simultaneously.  Compact and efficient design with minimal moving parts means low maintenance.

  • Copper Recovery - Model SB15 - Variable Speed Dosing Silo

    Copper Recovery - Model SB15 - Variable Speed Dosing Silo

    SB15 Variable Speed Dosing Silo or 'Storage Bin' offers the ability to absolutely maximize throughput of the CM50 Cutting Mill and increases separation efficiency.  Even and consistent feeding of the mill and separator is critical to maximizing output. This ultra heavy duty dosing silo features oversized helival bevel gearboxes, and top of the line compon-ents ensuring reliability and...

  • Copper Recovery - Model SB15 - Variable Speed Dosing Silo

    Copper Recovery - Model SB15 - Variable Speed Dosing Silo

    SB15 Variable Speed Dosing Silo or 'Storage Bin' offers the ability to absolutely maximize throughput of the CM50 Cutting Mill and increases separation efficiency.  Even and consistent feeding of the mill and separator is critical to maximizing output. This ultra heavy duty dosing silo features oversized helival bevel gearboxes, and top of the line compon-ents ensuring reliability and...

  • Copper Recovery - Model FRM1000 - Fines Recovery Machine

    Copper Recovery - Model FRM1000 - Fines Recovery Machine

    FRM1000 Fines Recovery Machine is an effective, economical, and most importantly - LOW MAINTENANCE - LOW COST - Fast ROI option for recovery of metal fines.  Whenver chopping, a very small amount of metal fines are generated.  Available as a stand alone unit or as a package with transport equipment to and from the machine as well as a control panel to integrate seamlessly with any Phoenix configuration.

  • Copper Recovery - Ultimate Color Sorter

    Copper Recovery - Ultimate Color Sorter

    Normally found in Hamos WRS PVC Window recycling plants, color sorting can be used for a number of applications to upgrade your materials. High Resoluiton Full-Color RGB trichromatic cameras allow for near human eye vision precise sorting.  Even small shade differences are detected.

  • Copper Recovery - Industrial Wire Shredder

    Copper Recovery - Industrial Wire Shredder

    This shredder is capable of processing armored cable and ACSR that is cut into pieces,and must be fed with grapple or conveyor.  Due to the integated shredder platform no special foundations are required.  All the knives are sharpenable. Throughputs range from 1-4 ton/hr.  *ACSR on rolls or reels should be processed through a linear feed chopper which is available upon request.

Products by Redoma Recycling AB

  • Single Machines - Rough Choppers - MRC

    The Multi Purpose Rough Choppers of REDOMA are mainly intended for shredding of cables but can also be used for other materials, such as wood, plastics, cartons etc.

  • Redoma - Model MRC 18-680 - Multi Purpose Rough Choppers

    Redoma - Model MRC 18-680 - Multi Purpose Rough Choppers

    Motor kW: 18.5. Motor for hydraulic unit kW: 2.2. Rotor length mm: 680. Cutting circle Ø mm: 360. Rotor speed approx. rpm: 110. Rotor knives pcs: 44. Fixed knives - lower pcs: 2. Fixed knives - upper pcs. Hopper volume m3: 1. Average infeed capacity *kg/h: 400.

  • Redoma - Model MRC 37-1000 - Multi Purpose Rough Choppers

    Redoma - Model MRC 37-1000 - Multi Purpose Rough Choppers

    Motor kW: 37. Motor for hydraulic unit kW: 4. Rotor length mm: 1000. Cutting circle Ø mm: 360. Rotor speed approx. rpm: 110. Rotor knives pcs: 84. Fixed knives - lower pcs: 3. Fixed knives – upper pcs. Hopper volume m3: 1.5. Average infeed capacity *kg/h: 700.

  • Redoma - Model MRC 45-1350 - Multi Purpose Rough Choppers

    Redoma - Model MRC 45-1350 - Multi Purpose Rough Choppers

    Motor kW: 45. Motor for hydraulic unit kW: 4. Rotor length mm: 1350. Cutting circle Ø mm: 360. Rotor speed approx. rpm: 110. Rotor knives pcs: 108. Fixed knives - lower pcs: 4. Fixed knives - upper pcs. Hopper volume m3: 2. Average infeed capacity *kg/h: 1000.

  • Redoma - Model MRC 90-1600 - Multi Purpose Rough Choppers

    Redoma - Model MRC 90-1600 - Multi Purpose Rough Choppers

    Motor kW: 90. Motor for hydraulic unit kW: 5.5. Rotor length mm: 1600. Cutting circle Ø mm: 490. Rotor speed approx. rpm: 110. Rotor knives pcs: 72. Fixed knives - lower pcs: 4. Fixed knives - upper pcs: 4. Hopper volume m3: 2.5. Average infeed capacity *kg/h: 1800.

  • Single Machines - Granulators - GR

    The granulators of REDOMA are intended for chopping of cables down to granule size but can also be installed in flexible combinations, such as single machines or inline.

  • Recovery of Fine Copper

  • Redoma - Model PC 12C & PC 15C - Classifier Up to 1300 kg/h

    Redoma - Model PC 12C & PC 15C - Classifier Up to 1300 kg/h

    The REDOMA classifiers are used for recovery of small copper and aluminum particles - so-called fines - from the insulation of granulated and separated cable. The classifier is always installed as an additional unit after the separator.

  • Dust Separation

  • Redoma - Dedusting System

    Redoma - Dedusting System

    All cable recycling systems from Redoma include a filter system with ventilation and dust extraction tubes.

Products by hamos GmbH

  • Electrostatic Separators

  • hamos - Model EKS - Electrostatic Plastics Separators

    hamos - Model EKS - Electrostatic Plastics Separators

    You can separate mixed plastics waste into its individual components with the hamos EKS electrostatic separators, as well as separating undesired plastic contamination. Using the hamos EKS, your mixed materials can be separated into pure sorted fractions with a minimum of effort by using the tribo-electric behaviour of the different plastics. You can therefore use mixed plastics waste as a valuable raw material for new high grade products.

  • hamos - Model KWS 1010 - Electrostatic Metal / Plastic Separators

    hamos - Model KWS 1010 - Electrostatic Metal / Plastic Separators

    hamos KWS electrostatic separators are used for dry separation of metals from plastics and other non-conductive materials. Even finest metal particles of < 0.1 mm can be separated.It is therefore an especially efficient way to regain valuable metals by separating them from plastics or to clean plastics from metal parts before further processing.

  • hamos - Model KWS-PET - Metal/PET Electrostatic Separators

    hamos - Model KWS-PET - Metal/PET Electrostatic Separators

    The hamos KWS-PET electrostatic metal separators are used for dry separation of metals from PET and other plastic flakes. Even finest non-ferrous metal particles can be separated. The efficient separation process works with low running cost. Due to its function principle the hamos KWS-PET separates other kinds of conductive materials like wood, cardboard and conductive rubber as well. For best performance the material has to be dry (humidity less than...

  • hamos - Model EKS-PET - Electrostatic PET/PVC Separators

    hamos - Model EKS-PET - Electrostatic PET/PVC Separators

    hamos EKS-PET electrostatic plastics separators separate undesired PVC contamination from washed and dried PET flakes, to produce a clean PET fraction. The hamos EKS-PET electrostatic separator enables very high PET purities through almost complete separation of PVC contamination. Approx. 90 - 95 % of the PVC content is removed, even with large throughput rates (3 t/hr). The PVC content can be reduced in this single separation stage from, for example,...

  • hamos - Model RSS - Elastomer Separators

    hamos - Model RSS - Elastomer Separators

    With the hamos RSS elastomer separator, undesired elastomers are separated out in a dry way. A highly concentrated elastomer fraction and a high quality practically elastomer-free plastic fraction are obtained. In recycling of plastics from electronic waste, automotive light shredder fractions (SLF), etc. it is important to obtain clean and directly recoverable plastic fractions. Elastomers contained in plastics, such as...

  • hamos - Model KMS & EMS - Electrostatic Minerals Separators

    hamos - Model KMS & EMS - Electrostatic Minerals Separators

    hamos KMS electrostatic minerals separators sort heavy mineral sands efficiently with good separation results in pure individual fractions. The dry operation process separates by using the differences in the conductivity of the minerals. Desired constituents can be concentrated and undesirable foreign substances removed this way from sands containing heavy minerals (for example ilmenite, rutile or zirconium sands) and...

  • Metal Separators/Detectors

  • hamos - Model HS - Free Fall Metal Separators

    hamos - Model HS - Free Fall Metal Separators

    hamos HS electronic all-metal separators serve for detection and fully-automatic removal of individually arising metallic contamination in free-falling, free-flowing bulk materials. Not only are metals containing iron (ferrous metals) recognised here, but also non-ferrous metals such as, e.g. aluminium, copper, brass, etc.The result is a practically metal-free product.hamos HS all-metal separators protect products, machines and tools from damage...

  • hamos - Model FFS  Series - Metal Separators for Pneumatic Conveying Lines

    hamos - Model FFS Series - Metal Separators for Pneumatic Conveying Lines

    The hamos FFS series electronic all-metal separators recognise and remove metal particles from bulk materials that are transported in vacuum and pressure conveying lines. The metal recognition and separation takes place 'on the fly' with conveying speeds at up to 30 m/s. Special mechanical separation systems are used, depending on the type of conveying (pressure or vacuum conveying, continuous or intermittent). The conveying pressure is maintained...

  • hamos - Model LCS - Last Chance Metal Separators

    hamos - Model LCS - Last Chance Metal Separators

    Electronic all-metal separators of the hamos LCS ('Last Chance Separator') series are used especially in plastics processing with slow moving or 'stationary' material columns. They offer the last chance of detecting damaging metal parts and removing them fully automatically, before these disappear into the intakes of extruders or injection moulding machines. Not only are ferrous metals detected, but also non-ferrous metals such as aluminium, copper,...

  • Recycling Equipment

  • hamos - Model KRS - Recycling Systems for WEEE Plastics

    hamos - Model KRS - Recycling Systems for WEEE Plastics

    The hamos KRS uses field tested dry working electrostatic machines for the separation of wood, rubber, metals and other contaminations to gain high purities of ABS, PS and PP. Mixed Black Plastics are no problem.   hamos supplies a turn-key hamos KRS plastic recycling system for the automatic separation of pre-processed plastic mixtures, coming from the recycling of WEEE and refrigerators. Such plastic mixtures can be separated with the same...

Products by Wagner Shredder

  • Wagner - Twin Shaft Shredder

  • Wagner - Single Shaft Shredder

  • Wagner - Model WS5 - Universal Single Shaft Shredder

    Wagner - Model WS5 - Universal Single Shaft Shredder

    The small shredder for big challenges. For nearly all recycling and recyclable material. all sorts of plastic waste (hard and soft, cluster, automotive, foils, etc), electric cables, electronic scrap, all sorts of wood waste, paper and cardboard boxes, textiles and many more.

  • Wagner - Model WS11-15 - Single Shaft Shredder

    Wagner - Model WS11-15 - Single Shaft Shredder

    The successful model. For more than 15 years. For nearly all recycling and recyclable material. all sorts of plastic waste (hard and soft, cluster, automotive, foils, etc), electric cables, electronic scrap, all sorts of wood waste, paper and cardboard boxes, textiles, and many more.

  • Wagner - Model WTS500 - Universal Twin Shaft Shredder

    Wagner - Model WTS500 - Universal Twin Shaft Shredder

    The pre-sorted material to be chopped is fed into the two shafts whose rotors are moving slowly in opposite directions (therefore dust and noise free). The cutting discs are plugged on the shaft.This process is controlled by an intelligent and innovative PLC. In case the machine is overloaded or foreign objects are in the cutting unit, the rotor stops and moves backward (return overload behaviour and reverse running). The precisely serrated...

  • PET Perforator

  • Wagner - Model 10 - PET Perforator

    Wagner - Model 10 - PET Perforator

    Perforators are used for slitting or piercing PET bottles or containers with 5 litres at full capacity. This process enables the production of compressed bales with higher density and compactness. There are three construction models available that achieve a throughput ranging from 450 to 2,400 kg per hour.

  • Wagner - Model 16-2 - PET Perforator

    Wagner - Model 16-2 - PET Perforator

    Perforators are used for slitting or piercing PET bottles or containers with 5 litres at full capacity. This process enables the production of compressed bales with higher density and compactness. There are three construction models available that achieve a throughput ranging from 450 to 2,400 kg per hour.

  • Wagner - Model 32-2 - PET Perforator

    Wagner - Model 32-2 - PET Perforator

    Perforators are used for slitting or piercing PET bottles or containers with 5 litres at full capacity. This process enables the production of compressed bales with higher density and compactness. There are three construction models available that achieve a throughput ranging from 450 to 2,400 kg per hour.

  • Bale Breaker

  • Wagner - Model BA30 - Bale Breaker

    Wagner - Model BA30 - Bale Breaker

    The bale breaker is capable of either disintegrating or opening various compressed bales, pushing them towards the following processing steps. According to the material, the throughput amounts to 5,000 kilo per hour. The bale is put on a belt feeder by a stacker. The machine's intelligent controller then forwards it to the working chamber. The bale is routed by the automatic, load-dependent slider to the slow rotation disintegration rotor.However,...

  • Tyre Dismantler

  • Other Products

  • Wagner - Universal Twin Shaft Shredder

    Wagner - Universal Twin Shaft Shredder

    Our experience gathered over 30 years in the construction of shredders has contributed greatly to the development of this category of WTS shredder models.

  • Perforator

    Perforator

    Perforators are used for slitting or piercing PET bottles or containers with 5 litres at full capacity. This process enables the production of compressed bales with higher density and compactness. There are three construction models available that achieve a throughput ranging from 450 to 2,400 kg per hour.

  • Model WRD  - Tyre Dismantler

    Model WRD - Tyre Dismantler

    The WRD model range separates rims (steel or aluminium) from car wheels. The machines are used on sites where a large quantity of tyres need to be processed quickly and efficiently.

Products by G.P.S. Srl

  • Single, Double or Triple Compression Balers

  • Model 50-1C - Scrap Metal Baler

    Model 50-1C - Scrap Metal Baler

    The scrap metal balers has been designed to work in manual, semi-automatic or fully automatic mode and can be integrated in fabrication and or stamping plants where scrap is automatically conveyed to a storage or processing area. These scrap balers produce high density bales suited for direct use by foundries and steel mills.

  • Model 50-2C - Scrap Metal Baler

    Model 50-2C - Scrap Metal Baler

    The scrap metal balers has been designed to work in manual, semi-automatic or fully automatic mode and can be integrated in fabrication and or stamping plants where scrap is automatically conveyed to a storage or processing area. These scrap balers produce high density bales suited for direct use by foundries and steel mills.

  • Model 80-2C - Scrap Metal Baler

    Model 80-2C - Scrap Metal Baler

    The scrap metal balers has been designed to work in manual, semi-automatic or fully automatic mode and can be integrated in fabrication and or stamping plants where scrap is automatically conveyed to a storage or processing area. These scrap balers produce high density bales suited for direct use by foundries and steel mills. This machine can be used as a tire wire baler in order to process tire wire and bale tire wire scrap in high density...

  • Light Scrap and ELV Balers

  • Model M-5 and M-6 - Scrap Baler

    Model M-5 and M-6 - Scrap Baler

    The M-Generation scrap metal processing balers are particularly well suited for small to mid sized operators. Versatile and modular scrap balers and metal scrap baler for light scrap processing or ELV baling.

  • Mobile Light Scrap and ELV Balers

  • Predator Mobile Baler

    Predator Mobile Baler

    There is just nothing like it. This car baler does set a standard by itself. Destructive power on the go with the world's most powerful charging box.

  • Semi Mobile or Stationary M-Generation Shears

  • Semi Mobile H-series Shears

  • Stationary H-series Shears

  • Scrap Balers

  • G.P.S. - Model M-Generation Series - Scrap Balers

    G.P.S. - Model M-Generation Series - Scrap Balers

    The M-Generation scrap baler and scrap logger feature several different options and configurations in order to guarantee the maximum possible flexibility. The charging box features three! powerful rams per lid generating a staggering 200 tons of force on the lid and on the side compression lid. This is more than any other baler in this segment. The charging box can be 5 m  (16.4 ft) or 6 m (19.7 ft) long. This baler can be driven either by...

  • G.P.S. - Model 80 2C XL - Two Compression Scrap Balers

    G.P.S. - Model 80 2C XL - Two Compression Scrap Balers

    The two compression balers for scrap have been designed to work in the rough environment of a scrap yard but can also be integrated in automobile or other stamping plants. The structure is very robust and the hydraulics allow for a very high performance ratio. The final product is a small but very dense bale with sizes from cm 30x40x30Var suited for direct use by foundries and steel mills.  These machines are designed specifically around customer...

  • G.P.S. - Model 30-3C - Three Compression Scrap Balers

    G.P.S. - Model 30-3C - Three Compression Scrap Balers

    The three compression balers have been designed to work in a scrap yard but can also be integrated in automobile or other stamping plants. The structure is very robust and the hydraulics allow for a very high performance ratio of up to one bale per 20 seconds, meaning 180 bales per hour! The final product is a small but very dense bale with sizes from cm 30x30x30Var to cm 35x35x35Var suited for direct use by foundries and steel mills. These machines...

  • Shears And Shear/Balers For Scrap Processing

  • G.P.S. - Model M-Generation Series - Shear Balers

    G.P.S. - Model M-Generation Series - Shear Balers

    The M-Generation scrap shear baler and logger feature several different options and configurations in order to guarantee the maximum possible flexibility in any scrap yard. The charging box features three! powerful rams per lid generating a staggering 200 tons of force on the lid and on the side compression lid. This is more than any other shear baler in this segment. The charging box can be 5 m  (16.4 ft) or 6 m (19.7 ft) long. This baler can be...

  • G.P.S. - Model HS Series - Heavy Duty Shear Balers

    G.P.S. - Model HS Series - Heavy Duty Shear Balers

    These machines have been designed to work in rough environments doing all the tough work. The HS heavy duty scrap shears have been specifically designed for high volume scrap processing. These multidimensional machines are able to shear, log and bale high quantities of material day in -day out and are designed to keep up with your productivity requirements guaranteeing all the flexibility you may need in your scrap yard. Made of a very robust and...

  • G.P.S. - Model Monster 800 - Inclined Scrap Shears

    G.P.S. - Model Monster 800 - Inclined Scrap Shears

    Achieve unparalleled productivity levels with these automatic shears with open box. Just keep feeding and the machine will do the rest. The Monster scrap shears have been specifically designed for high volume bulky scrap processing. With an inclined feed box wider than a trailer no preparation is necessary. These scrap monsters are able to shear high quantities of material. Preparation of long material is no longer needed. With the open box design...

  • G.P.S. - Model RAPTOR-4 - Inclined Shear

    G.P.S. - Model RAPTOR-4 - Inclined Shear

    This unit has been designed to process long material into foundry grade scrap eliminating all costi pre-processing with crane mounted shears or torch. Raptor features and open sloping box which can be loaded constantly while the machine runs its fully automatic shearing cycle.

Products by Urban Mining Solutions GmbH

  • CORE Technology

  • UMS - Rotor Chain Crusher (RCC)

    UMS - Rotor Chain Crusher (RCC)

    The RCC is a very flexible and universal machine for first treatment, dismantling, delamination and cleaning for many different input materials.

  • UMS - Down to Size Shredder (DTS)

    UMS - Down to Size Shredder (DTS)

    Down To Size Shredders break down and homogenize solids according to size. Depending on the application, UMS selects the ideal shredder aggregate from tried and tested units from European manufacturers.

  • UMS - Double Rotor Hammer Mill (DHM)

    UMS - Double Rotor Hammer Mill (DHM)

    The DHM ensures best delamination results of complex compound materials and cleaning of mixed metals. UMS-customer around the world value the exceptional performance processing e. g. shredder residuals, E-scrap (WEEE), populated and unpopulated boards, aluminum-copper radiators, aluminum scrap, Non-ferrous composites, fiber-metal-compounds, adhesive connections, vulcanized connections or productions scrap.

  • UMS - Air Jig Machine (ARJ)

    UMS - Air Jig Machine (ARJ)

    The air jig is an universal and highly flexible machine to separate materials of different density and/or particle shape.

  • UMS - Linear Screening Machine (LSM)

    UMS - Linear Screening Machine (LSM)

    The LSM screens solid mixtures according to their particle size. UMS has developed own Linear Screening Machines, since no product was available on the market fulfilling our requirements at the time.

  • UMS - Eddy Current Separator (ECS)

    UMS - Eddy Current Separator (ECS)

    The ECS allows the separation of conductive parts e. g. aluminum from solid mixtures. UMS and one partner have developed together our own Eddy Current Separator, since no product was available on the market fulfilling our requirements at the time.

  • UMS - Overbelt Magnet Separator (OMS)

    UMS - Overbelt Magnet Separator (OMS)

    The OMS extracts coarser magnetizable components from a material stream. The DMS is used for finer magnetizable particles instead. Depending on the material and the objective UMS choose tried-and-tested OMS from European manufacturers or makes use of its own DMS.

  • Hamos - Model KWS - Corona Roller Separator

    Hamos - Model KWS - Corona Roller Separator

    The Corona Roller Separator from our partner HAMOS enables the separation of conductive from non-conductive materials with small particle sizes e. g. metal-plastic mixtures.

  • Core Solutions

  • Core - Model ERP1 - Preliminary Treatment System

    Core - Model ERP1 - Preliminary Treatment System

    With the well-proven CORE System ERP1, UMS offers a highly efficient combination of aggregates for the preliminary treatment of old equipment and composite scrap. The system is universally and quickly adaptable for a variety of input materials, and enables the immediate discharge of coarse iron and steel, as well as the targeted separation of recyclable fractions and pollutants.

  • Core - Model ERP2 - Secondary Raw materials System

    Core - Model ERP2 - Secondary Raw materials System

    With ERP2, UMS has created a very flexible system for extracting high-purity secondary raw materials from pre-shredded composite products. The aggregates used are not interlinked, but available as independent subsystems. This allows operators to react flexibly to variances in the input material, and to influence the quality of the fractions generated at any time.