Countronics products

Source as well as measure facility.. Battery Operated with commonly available 4 ‘pencil cells’. Ergonomic design to make it easy to handle. LED indication for Battery Low. Press to read system to enhance battery life.

Individual bright 7 segment Red LED displays for Humidity, Temperature and Pressure. Alarm settings for all three parameters with in-built buzzer. Visual annunciation of alarm by blinking of parameter display causing alarm. Sensor supply for Humidity, Temperature and Pressure provided. Sensors mounted on unit for stand alone application. Aesthetically designed unit with sleek plastic body. Rear metal clamp for direct wall mounting.

Accurate pH display with 0.01pH resolution. Auto buffer recognition with 2 point calibration for pH. Auto/Manual temperature compensation selectable for both pH and Conductivity. 4 Step Range selection 0.1µs to 199.9ms for conductivity. Cell Factor selectable for both 1.0 and 0.1. Digital calibration for conductivity. Auto Temp Compensation using PT100 sensor. One touch switching between conductivity and pH display selections. Large alphanumeric LCD display with bright backlight. Aesthetically designed front panel with membrane switches and sleek bench top cabinet.

Data saved directly on USB Pen drive in an MS Excel compatible file. Microprocessor based linearised for J/K/R Thermocouples and PT100 temperature sensors. 4 line alphanumeric LCD display with backlight for user friendly displays . Auto cold junction compensation for thermocouples and 3 wire input for PT100. Number of usable channels selectable from 1-16. Auto/Manual mode of scanning selectable. Rate of logging settable by user in Mins:Secs. Digital offset user settable for individual channels. Internal Real Time Clock with battery backup for saving values along with Date and Time. No need of any complicated or additional software for managing data. Saving data on Pen drive allows a very large amount of storage space at very low cost.

CMOS/LSI Design For High Reliability & Accuracy., Auto & Single Cycle Operation. Counting by Contact, Pulse, Proximity & Photo Sensor Input. 12V/50 mA DC Output for Proximity Detector/Photo Sensor. Built-in Ni-Cd, Rechargeable Battery Backup if required.

6 digit bright 7 segment Red LED display for count display. Scale factor user settable from 0.00001 to 9.99999. 6 digit Preset value user settable. Pulse multiplication technique used for counting improves resolution 4 times. Solid state memory to save user settings and count on power failure. Program Lock to prevent tampering with settings. Aesthetically designed front panel with touch type membrane keys. Housed in plastic ABS cabinet.

Bright 7 segment, 4 Digit Green Display for Humidity and 4 Digit Red Display for Temperature. 4 separate Limits and Solid State Relay (SSR) outputs for Heater, Cooler, Humidifier and De-Humidifier. Proportional (PWM) SSR outputs for Heater and Humidifier with user settable Percentage Power. On/Off SSR outputs for Cooler and De-Humidifier with user settable Hysterisis. Digital Offset control for Temperature and Humidity. Capacitive sensor for 0-100% Humidity and -20°C to +80°C. Non-Volatile memory to hold settings and counts.

4 digit display for Flow Rate with resolution from 0.001 to 1. 6 digit totaliser for integrated flow values with resolution setting from 1 to 0.001. Multiplier programmable with resolution ranging from 0.001 to 0.00001. Input frequency range from 10 pulses/min to 50,000 pulses/min. Totalized flow saved in memory on power failure. Rear panel configuration lock. Aesthetically designed front panel with membrane switches. Attractive ABS cabinet.