Croatia Pumpe Nova Ltd. products

Standard pumps are designed in compliance with the DIN 24255 standard. They are of standardized dimensions and interchangeable regardless of the pump manufacturer, without changes in connections and supports, while their hydraulic characteristics are approximately identical with equal dimensions. The pump impeller is disassembled in the direction of the electro motor without disconnecting the piping or moving the motor. The wide scope of interchangeability of components of these pumps provides for a safe and reliable service life with a minimum stock of spare part.

A row of VS pumps is arranged to suit all requirements regarding supply of clean and slightly turbid water, cold oils, liquid fuels etc. It is also serviceable at civil and industrial waterworks, artificial rain, fire-fighting purposes, for the production of delivery water in hydraulic water plants etc. These pumps can supply medium of temperature up to 105°C.

Vertical single or two stage volute casing pumps handle fire-extinguishing water for bilge.

Hydrophor marine plants and the other water-work plants for clean water. The pump itself is of a simple and solid construction, joined with electro-motor by means of the flexible coupling. By the adequate electro-motor design it can be vertically or horizontally fixed.

Main avenue of use for these pumps is in cases of large quantities and low manometric heads. This property of high-speed pumps, which at low manometric heads work at relatively high rpm, which allows for this half axial pump a widespread area of use with a very high degree of effectiveness. Our standard PKH pumps are most often used as cooling pumps in energy installations, for irrigation and drainage, in industry, mining etc. Considering large cross sections, these pumps are able to withstand, to a certain degree, turdines and foreign bodies in the medium.

Propeller pumps are designed for the supply of capacious quantities of water at low heads, being thus very economically applied in the systems of irrigation and drainage, industry and others.

Primary use of well pumps is for supply of drinking water, water used in industry and agriculture. Due to small diameters they are especially suitable for use in tight wells.

Pumps are relised in accordance with international standard ISO 2858. They have normal dimensions and interchangeable regardless to pump manufacture, without changing conectors and fundamentals. Hidraulic characteristic are similar for equal dimensions.

RPP pumps are designed as process pumps for very rigorous working conditions in process industry. They are made as per API610 standard, 7th edition (API = American Petroleum Institute).  These pumps are delivered on the purchaser’s special request and as spare part for delivered pumps. They are used for transport of all media in refineries, petrochemical industry, chemical and pharmaceutical industry, food industry, thermal power plants and everywhere where working conditions are such that can be realized by these pumps. The adequate choice of material enables transport of abrasive and aggressive media at very high temperatures and pressures.

Although outstanding by the simplicity of their maintenance and control during operation, double inlet single stage nonself-priming DH and selfpriming DHs pumps, as such, represent a kind of highly serviceable, long-life and tested pump devices. DHv pumps adaptable from DH pumps are used for temperature of 100 to 150°C. It means that each of the mentioned DH pumps - on the purchaser`s wish - can be used in DHv design.