CS Medical LLC products

High-level disinfection of transesophageal (TEE) echocardiogram ultrasound probes. The TD 100 delivers high level disinfection to TEE probes in ONLY 5 minutes. The TD 100 disinfects each TEE probe with High-level disinfectant and provides printed verification upon completion of successful disinfection cycle. Microprocessor-controlled, the TD 100 is simple to use for any health care professional reprocessing a used TEE ultrasound probe. The TD 100 dramatically reduces the amount of stress and the potential for damage to TEE probes. The system was designed with every aspect of the TEE probe taken into consideration. The control handset is held securely within the TD 100, while strain and stress is minimized from the cable and electronic pack adapter with a specially designed hanger and mounts for both.

High-level disinfection of TEE probes in three minutes. The TD 200® Automated TEE Probe Disinfector achieves high-level disinfection of a soiled TEE probe in 3 minutes. CS Medical`s newest high-level disinfectant TD-12® AquaCide® is used in conjunction with the TD 200 to attain this 3 minute high-level disinfection claim. TD-12 AquaCide is a single-use granulated biocide that is converted to a liquid solution before the high-level disinfection process.

Adequately dry ultrasound probes prior to reuse or storage. The introduction of potentially harmful contaminates after an ultrasound probe has been properly high-level disinfected is a reality in today`s healthcare environment.

Effectively and securely store disinfected endocavity transducers and semi-critical devices. Designed to effectively and securely store disinfected TEE probes by suspending each disinfected TEE probe in a vertical position that minimizes stress on the connection cable and strain relief of the TEE probe. The polypropylene TEE Probe Storage Cabinets are designed to accommodate either three or six TEE probes.

Effectively removes bacteria, viruses and endotoxins from TD 100 rinse water. The risk of hospital associated infections has become a focal point in many facilities throughout the United States, as well as other parts of the world. One potential source of contamination is the water that is used to rinse scopes and probes that have been high-level disinfected. High-level disinfection is only one component, regardless of manual or automated method, when healthcare workers are reprocessing semi-critical medical devices. The high-level disinfection process is defined by individual disinfectant manufacturer, which is followed by large volumes of water recommend to remove residue of the disinfectant.

Spills of disinfectant at a health care facility pose numerous issues. Proper containment and cleanup is critical to ensure hospital patient and staff safety. A clean up kit should not only be readily available and contain all the necessary components to manage and contain the spill but also offer the person responding to clean up the spill necessary barriers in prevention of vapor exposure.

Designed to provide a reliable method for de-activation of high-level disinfectant prior to disposal. The AC-DS-03 Station is a semi-automated neutralization system designed to neutralize spent high-level disinfectants and residue laden rinse water prior to disposal into facility drains. When used with the CS Medical TD 100®Automated TEE Probe Disinfector or the TEEClean®Automated TEE Probe Cleaner Disinfector, the neutralization station effectively manages the waste stream, disinfectant, and rinse from the TD 100 prior to entry into the hospital drain. The AC-DS-03 has been tested to be compatible with both glutaraldehyde or OPA high-level disinfectants. Glycinex™ is required for the deactivation process of the high-level disinfectant within the AC-DS-03 tank.

EPA registered hospital strength hard surface cleaner, disinfectant, and deodorizer with a fresh lemon scent