DBS Manufacturing, Inc. products
Power Industry
DBS - Pier-Mounted Drive Unit
Most frequently used as a clarifier drive, the DBS Pier-Mounted Drive is a low-speed, high-torque, totally enclosed gear drive with positive output torque overload protection. The drive unit has an external rotating drive drum with attachment points for the rake cage. It is supported by a column in the center of the tank, and tank sizes typically range from 40 ft to 300 ft (12 m to 100 m) in diameter.
Mineral Processing
DBS - Bridge-Mounted Drive
The DBS Bridge-Mounted Drive is a low-speed, high-torque, totally enclosed gear drive with positive overload protection. The drive unit has a central output shaft to drive the rakes, and is supported by a bridge completely spanning the tank. It is typically used on tank sizes from 10 to 100 ft (3 to 30 m) in diameter.
DBS - Bridge-Mounted Dual Drive
Used in industrial, municipal, and mining clarifiers and thickeners. The DBS Bridge-Mounded Dual Drive has two concentric output shaft drives: the rake drive and the turbine drive. The rake drive section has a rotating flange hub with attachment points for the output shaft. The gear drive is low-speed, high-torque, and totally enclosed. It is also designed with positive overload protection. The turbine drive section is a heavy-duty, totally enclosed gear drive that runs at a higher speed. A variable speed turbine drive is standard. The Bridge-Mounted Dual Drive is supported by a bridge that extends across the length of the tank. It is typically used on tank sizes from 10 ft to 100 ft (3 to 30 m) in diameter.
DBS - Hyperbolic Mixer
The DBS Hyperbolic Mixer rotor is specifically designed to operate at the bottom of a mixing basin where the rotor will efficiently draw water down and discharge it in a horizontal direction. This induced flow will circulate the water in the tank from bottom to top to maintain all solids in suspension.
Drive Units for the Pulp and Paper Industry
DBS - Rake Lifting Mechanism Unit
Almost all DBS Drive Units can be provided with an automatic lifting mechanism that can raise and lower the rakes up to 36 inches (900 mm). Rake lifts operate by raising the output shaft into the drive unit on S-series models and raising the entire drive unit on D-Series models.
