Dimaco sas products

The full flow pneumatic pumps for pumping wells manufactured by DIMACO allow operation without any need for external controls or sensors. The pumps are in fact able to internally control the fluid level, starting and stopping according to it, without timers, electrical connections, immersed sensors or anything else. They are recommended for working in the presence of solids in high quantities in highly corrosive environments.

The pneumatic stroke counter installed in the pump`s air supply line allows indirect measurement of the pumped fluid through ON/ OFF cycles (both with automatic pumps and pumps managed by an external control panel). Other applications: the device can also be used for Fluids, in systems with alternative positive displacement pumps.

For the recovery of the floating product on the groundwater are used systems able to follow the movements of the flap itself and recover only the lightweight product. The system is equipped with a float floating with calibrated specific weight. In function of the supernatant layer and of the characteristics of this, may be used skimmer by gravity or selective skimmer (with hydrophobic filter in the float).

The purpose of pneumatic level switch is signalling that the maximum level of the tank has been reached, only by using compressed air. Technology patented by DIMACO. The parts in contact with the contents of the tank are resistant to hydrocarbons.

Two types of control panels are available: For automatic TF pumps (HWSO). For TF pumps with timer (HWSO-T) However, they can be configured according to the user requirements, integrate a PLC control system and remote monitoring or have only pneumatic blocks for areas where electrical systems cannot be used.

Stationary sampling device, operated on the pressure-vacuum principle for monitoring of groundwater contamination. The device uses its own power supply thanks to a photovoltaic panel placed on its roof and an accumulator placed at the base, all suitably sized to ensure correct operation for the whole day. The system is equipped with an electronic control panel with a small display which manages all the phases of sampling and washing, as well as the programming of the each phase.

Starting from the client`s request, DIMACO create an ad-hoc solution, whether it is an automation system of a process, an automatic machine or a specific system, DIMACO is able to achieve that, with a very high level of personalization. Also, it is possible to start from a standard product and make chances to adapt it to the application for which it is intended.