Dinel, s.r.o. products

Designed for reliable level measurement of various liquids. Non-contact antenna radar level meter. Measuring range up to 8 m or up to 20 m. Variable installation thanks to the possibility of connection via bottom or top thread. Intelligent numerical signal processing with false reflection elimination. Connection via two-wire cable. Choice of standard cable gland or protective hose gland. Current output (4 ... 20 mA) with HART® protocol. Measurement independent of the temperature and pressure of the atmosphere above the surface. Possibility to measure even in aggressive vapours. High IP68 rating.

For continuous non-contact level measurement. FMCW antenna radar level gauge with a range of up to 20 m. Teaching function to suppress false reflections. Display of measured values on matrix OLED or LCD display. Current output - 4 ... 20 mA, HART® communication. Manual or remote adjustment. Measurement independent of temperature and pressure of the atmosphere above the surface. Possibility to measure even in aggressive vapors or vacuum.

New intelligent capacitive level meter with display, HART communication and diagnostics. For continuous level measurement of liquids and bulk solids in all industrial branches. A wide range of applications, direct installation in storage silos, hoppers, vessels, sumps, etc. Variants with fully coated electrodes for aggressive or electrically conductive media. Measured data in real time on the display (OLED or LCD available). Analog output 4 - 20 mA with digital two-way communication HART®. Comparing with reflective level meters, CLM-70 measures along all the electrode in full range (no dead zones). Contrary to radar level meters, also media with extremely low dielectric constants (εr) can be measured. Possible copying the configuration between level meters using the display module. Stainless steel design suitable for the food and pharmaceutical industries.

For continuous non-contact level measurement of liquid, pasty and bulk-solid materials. Universal use, direct mounting into tanks, vessels, containers, sumps, etc. Instant view of measured values on OLED or LCD display. Advanced signal processing with elimination of false reflections. Easy adjustment even without measured material. Current or data output - 4 ... 20 mA, HART®, RS-485 Modbus/RTU. Xi version for usage in explosive areas.

For continuous non-contact level measurement. For continuous level measurement of liquids (even if polluted), paste and mash materials in open or closed vessels, open channels and sumps. Configuration and adjustment of min. and max. measuring range by two buttons. Current (4 ... 20 mA) or voltage (0 ... 10 V) output. LED state indication. Easy and quick connecting by connector. Xi version for usage in explosive areas.

For continuos level measurement of liquid and bulk-solid materials. Direct mounting into containers, vessels, basins, reservoirs, etc. Possibility of linear measurements even in non-conductive and differently shaped containers. Simple sensitivity setting by means of magnetic pen. LED state and function indication. Wide choice of electric connection via connectors, cable glands or protective conductor. Material of housing and rod electrodes from stainless steel. Xi, XiT versions for usage in explosive areas, or XiM, XiMT versions for mining environments with a risk of hazard by methane or coal dust.

For continuous level measurement of liquid and bulk-solid materials. Direct mounting into containers, silos, basins, vessels, reservoirs, etc. Easy and quick connecting by connector. Continuous adjustment of initial capacity. Current (4 ... 20 mA) or voltage (0 ... 10 V) output. Removable electronic module. Material of housing and rod electrodes from stainless steel. Xi, XiT versions for usage in explosive areas. CLM-36_-40 (with double isolated electrode) is not available (replaced by CLM-70_-61).

High-frequency level sensor with elimination of deposits and foam on electrode in a compact design. For reliable limit-level sensing of various liquids, slurries and pastes. Resistant to adhesion of viscous and sticky media (ketchup, yoghurts, spreads, syrups, creams, pastes, cleaning agents, etc.). Replacement for vibrating level sensors. Adjustment by magnetic pen or programming wire. Universal design for all types of media (electrically conductive and non-conductive). High stability at high sensitivity (can be used for substances with εr ≥ 1.5). The unique design of the electrode system does not require an additional internal seal (O-ring).

For limit non-contact level sensing of various liquid and bulk-solid materials in closed or open tank, vessels, sumps, reservoirs etc. Variants of adjustment by two buttons or by magnetic pen. Optical state indication . Xi version for usage in explosive areas. Wide choice of electric connection via connectors, cable glands or protective conductor. Additional horn adapter improve measurement of problematic media (foamy levels, loose materials, etc.).

For limit level sensing of liquid and bulk-solid materials. Direct mounting into various containers, vessels, silos, tanks, filling inlets, reservoirs, etc. Outputs NPN, PNP, NAMUR (for explosive areas). Sensitivity and hysteresis fluently adjustable. Supply voltage 7 ... 36 V DC (NAMUR 8 ... 12 V DC). Material of housing and electrode from stainless steel. Process coupling - thread M27x2; M30x1.5; G3/4“ or Triclamp. LED state indication. Xi, XiT versions for usage in explosive areasor, or Xd version for usage in flamable dusts areas, or XiM, XiMT versions for mining environments with a risk of hazard by methane or coal dust.