DL Plastics BV products

We can offer you DL Renovatie Lining for existing concrete structures. This is a smooth plastic sheet on both sides, which can be applied on location in a special way using a stainless steel fasteners are mechanically anchored to the concrete. These plastic sheets are available in several colors and are produced in the materials HDPE, PVC, PP and PVDF.

The DL T-Lining has a very high chemical resistance and has been used with great success for more than 30 years for the protection of concrete structures against corrosion in; sewage and wastewater treatment plants (WWTPs and WWTPs), sewage pipes, sewage pumping stations, drinking water reservoirs, chemical storage depot and manure storage cellars. The material is provided with so-called T-profiles on one side and is attached to the formwork in such a way that the T-profiles are anchored in the concrete after the formwork has been removed. DL T-Lining is available in several colors and is produced in the materials HDPE, PP and PVC.

DLPHS Lining. This material is extremely suitable for existing and partially damaged concrete structures. DLPHS Lining is a permanently flexible plastic concrete protection that is applied on site by our specialists using a machine specially developed for this purpose. Due to a special treatment of existing structures, a very strong connection can be made on almost any surface with our DLPHS Lining. DLPHS Lining is applied in various qualities. The choice of product to be applied is determined after examination and analysis of the content and inspection of the substrate.

We also supply floating covers for covering manure silos. Floating covers are used to limit the emission of fertilizer gases. A floating cover has the advantage that it is a cheaper investment compared to other covers. Because the floating cover rests on the manure, this has no consequences for the load on the tank. However, a floating cover does require more attention/maintenance than any other cover. The rainwater has to be pumped out. These covers are supplied in consultation with floats/air vents, HDPE edge pipe, tension strap/rope and a mixing hole. The material used is a PVC foil reinforced with polyester 900 grams per m². Available in green or grey.

A DL-ANTI-ALG COVER is produced in our factory from a water-permeable PP fabric with a weight of 190 to 300 grams per m² and is very suitable for covers of silos for the storage of water. A DL-Anti-Algae Cover protects the DL-Liners against UV radiation from the sun, evaporation and against the blowing in of leaves or other debris.

DL Plastics B.V. has been known for many years as a supplier and producer of high-quality plastic materials and end products. Using the latest welding techniques, certified professionals in their own factory prepare thousands of liners for water storage tanks and silos and hundreds of foil tarpaulins for sealing water basins every year, which are not only sold in the Netherlands, but also exported to all parts of the world.

A DELAFLOAT is made of a very high quality polyolefin material. The material consists of two layers (one layer colored white) with small air-filled spaces in between that provide the high buoyancy. Due to the shape of the bubble, the DelafloaT creates a vacuum on the water, so that the DelafloaT sucks itself onto the water surface, as it were. The white top layer reflects the UV rays, so that the water heats up less in countries or periods with a lot of sun and heat. This helps to prevent algae growth, less evaporation and very easy installation. As an option, we supply “Gravity bags” for areas subject to strong winds. By hanging the Gravity bags on the DelafloaT, the DelafloaT floats flat on the water.