DOD Technologies Inc

128 products found

products

  • DOD Technologies - Fixed Gas Detectors

  • ChemLogic - Model CL1 & CL2 - Single Point Continuous Gas Detection Monitor

    ChemLogic - Model CL1 & CL2 - Single Point Continuous Gas Detection Monitor

    The ChemLogic Single Point Continuous gas detection monitor provides field-proven ChemLogic Technology in a NEMA 4X enclosure for the quick detection of low-level toxic and corrosive gases. From TDI gas and MDI gas, to ammonia, and hydrazine, the ChemLogic 1 continuous gas detector has an extremely diverse application range. The CL1 is the next generation of interference free, low maintenance colorimetric gas detection. This system is simple to...

  • DOD - Model EC20 - Multipoint Sampling Gas Detection System

    DOD - Model EC20 - Multipoint Sampling Gas Detection System

    The EC 20 Multipoint Sampling System that uses the proven PS-7 technology to sample up to 450 ft, from up to 20 individual locations. The EC20 is ideal for replacement of obsolete extractive centralized monitoring systems by using the existing sample lines in conjunction with built in high flow pumps. The EC20 eliminates the cost of replacing sample line infrastructure while adapting the advanced sensor technology of the PS-7 Gas Detector.

  • DOD - Model DOD64 FTIR - Gas Detection System

    DOD - Model DOD64 FTIR - Gas Detection System

    The DOD64 FTIR is a Flexible 16 to 64 Point Sequential FTIR Monitor that provides field-proven Fourier-transform infrared spectroscopy (FTIR) Technology for the quick detection of low level toxic, corrosive and combustible gases. For a full list of detectable gases available on the DOD64 FTIR gas detection system, please contact DOD Technologies, Inc.

  • ChemLogic - Model 96 - Point Continuous Gas Monitor

    ChemLogic - Model 96 - Point Continuous Gas Monitor

    The ChemLogic 96 Point Continuous Monitor provides field proven ChemLogic Technology for the quick detection of low level toxic and corrosive gases. The CL96 is the next generation of interference free, low maintenance colorimetric gas detection. This system is easy to install and utilizes 1/4' tubing to allow for easy upgrades of obsolete sample draw systems. Simply plug in your existing 1/4' sample tubing and you're ready to go. This new innovative...

  • ChemLogic - Model CL4 - Continuous Gas Detection System

    ChemLogic - Model CL4 - Continuous Gas Detection System

    The ChemLogic 4 point continuous monitor system features ChemLogic technology with a new intelligent optic system that reduces maintenance and decreases the risk of false positives. This system has a state-of-the-art and user-friendly touch screen control with a CF data collection system. The ChemLogic 4 surpasses the competition in reducing initial investment and cost of ownership.

  • ChemLogic - Model CL8 - Continuous Gas Detection System

    ChemLogic - Model CL8 - Continuous Gas Detection System

    The ChemLogic 8 point continuous monitor system features ChemLogic technology with a new intelligent optic system that reduces maintenance and decreases the risk of false positives. This system has a state-of-the-art and user-friendly touch screen control with a CF data collection system. The ChemLogic 8 surpasses the competition in reducing initial investment and cost of ownership.

  • DOD - Model CL1 - Dust Cone for Dirt and Debris Prevention

    DOD - Model CL1 - Dust Cone for Dirt and Debris Prevention

    The CL1 Dust Cone prevents dirt and debris from entering the continuous gas detection system in diisocyanate applications. The CL1 Dust Cone comes with 3 filters (1 installed, 2 spare). Filters should be replaced with each ChemLogic tape replacement. Use filter media part number 2-600-207 with this product. (Sold Separately).

  • DOD - Dust Cone Filter Media (10 Pack)

    DOD - Dust Cone Filter Media (10 Pack)

    The Dust Cone Filter Media prevents dirt and debris from interfering with diisocyanate gas detection applications. This filter is used with the CL1 Dust Cone (Sold Separately) Make sure to change filters with each ChemLogic tape change.

  • DOD - End of Line Particulate Filter

    DOD - End of Line Particulate Filter

    The end of line particulate filter prevents dirt and dust from entering or traveling up the sample line. This lowers the risk for false readings and additional optics cleaning procedures. This filter is used in non corrosive gas detection applications.

  • DOD - Particulate Filter for Corrosive Gases

    DOD - Particulate Filter for Corrosive Gases

    The All-New particulate filter for use with corrosive gases filters unwanted materials without absorbing the corrosive gas. Disposable after use, these filters allow you to measure accurate readings for a variety of corrosive gases without significant replacement cost. Simply add a filter to your existing configuration or to the end of your sample line. Filters sold individually – bulk orders are available.

  • DOD Technologies - ChemLogic Gas Detection Tapes

  • ChemLogic - Model 1 & 2 - 60 Day - Colorimetric Cassettes

    ChemLogic - Model 1 & 2 - 60 Day - Colorimetric Cassettes

    ChemLogic colorimetric tapes for use inside the ChemLogic 1 and 2 Continuous Gas Monitors. ChemLogic colorimetric cassettes offer extremely quick and reliable detection for an extensive list of gases. Shop our available tapes above, or, if you need a full detectable gas list please contact us today! These tapes are for the ChemLogic 1 and ChemLogic 2 continuous gas detection devices. Switch between gases with a change of tape, no gas keys are...

  • ChemLogic - Model 96 - 120 Day - Cassette

    ChemLogic - Model 96 - 120 Day - Cassette

    Types: Hydride ChemLogic 120 day cassette, Carbonyl Sulfide ChemLogic 120 day cassette, Mineral Acids ChemLogic 120 day cassette, Phosgene ChemLogic 120 day cassette, Chlorine ChemLogic 120 day cassette, Ammonia ChemLogic 120 day cassette, Bromine ChemLogic CL96 120 day cassette, Oxidizers ChemLogic CL96 60 day cassette, SG Mineral Acid ChemLogic CL96 120 day cassette, Chlorine SG ChemLogic CL96 120 day cassette.

  • ChemLogic - Model 8 - 120 Day - Cassettes

    ChemLogic - Model 8 - 120 Day - Cassettes

    The ChemLogic 8, 120-day cassette fits the ChemLogic 8 (CL8) unit. This advanced technology from DOD Technologies provides fast and dependable detection of low levels of toxic and corrosive gases for 120 days.

  • ChemLogic - Model 8 - 60 Day - Cassette

    ChemLogic - Model 8 - 60 Day - Cassette

    The ChemLogic 8, 60-day cassette is designed for use with the ChemLogic 96 Point Continuous Monitor, which provides rapid and reliable detection of low-level toxic and corrosive gases.

  • ChemLogic - Model CLPX - Portable X Replacement Cassettes

    ChemLogic - Model CLPX - Portable X Replacement Cassettes

    These ChemLogic Portable X replacement cartridges are compatible with the Next Generations’ ChemLogic Portable (CLPX) gas monitor. Because of its improved optics design and automated calibration, the CLPX has become the most reliable, foolproof, and user friendly gas detector on the market today. The CLPX uses patented DOD colorimetric technology to provide a rapid, accurate gas detection response to a wide range of gases. The CLPX was designed...

  • ChemLogic - Model CLP/Nextstep - Cassettes

    ChemLogic - Model CLP/Nextstep - Cassettes

    These ChemLogic CLP cassettes are compatible with DOD gas monitors. DOD’s advanced gas detection technologies continue to lead the industry in fast, accurate gas detection for a wide range of gases. All CLP monitors are designed for maximum uptime; routine maintenance and service is fast, and replacing cassettes is easy.

  • ChemLogic - Leak Test Tape

    ChemLogic - Leak Test Tape

    Colorimetric technology has been used for years in the determination of gas leaks. Each Chemlogic leak test tape has been specially formulated to detect Phosgene, Mineral Acids (HCL, HF, HBR etc.), Hydrides (Arsine, Phosphine, Diborane, Silane, H2S, etc.). Whether you are in a chemical plant checking fittings or a Semiconductor facility testing your cylinder hook up this makes the job quick and easy. Simply place the ChemLogic tape on the suspected...

  • DOD Technologies - Filters

  • DOD - Teflon Membrane Filter Housing

    DOD - Teflon Membrane Filter Housing

    The filter housing for teflon membranes allows for the quick change of filter by unscrewing the two ends and swapping out the teflon center. Used primarily in corrosive gas detection, this filter prevents dust and debris from entering the sample line or preventing particles from entering the gas detection system without diluting the sample measurement.

  • DOD - Model 1.44 OD x 4.61 Long - End of Line Particulate Filter

    DOD - Model 1.44 OD x 4.61 Long - End of Line Particulate Filter

    End of Line Particulate Filter for use with non corrosive gases in dirty environments. Thils filter prevents dust and debris from traveling up the sample line and causing false readings. Adding particulate filters to your machine can increase the service life of the optics system.

  • DOD - Model 100 Pack - 47mm - Teflon Filter Membranes

    DOD - Model 100 Pack - 47mm - Teflon Filter Membranes

    The Teflon Filter Membranes allow for the quick detection of corrosive gas in dirty environments. Change the filter by unscrewing the two ends of the filter housing and swapping out the teflon center. Used primarily in corrosive gas detection, this membrane prevents dust and debris from entering the sample line or prevents particles from entering the gas detection system without diluting the sample measurement.

  • DOD Technologies - Dosimeter Badges

  • ChemLogic - Model TDI - Dosimeter Badge

    ChemLogic - Model TDI - Dosimeter Badge

    DOD Technologies has introduced a cost effective TDI Badge (Toluene Diisocyanate). Dosimeter badges have been a trusted form of gas detection for years. This dependable colorimetric system of personal monitoring is both cost effective and well proven. These badges are worn by individuals and change color if exposed to specific target gas. Once the color change occurs it is then compared to a color estimator to determine the concentration of the...

  • ChemLogic - Hydrazine/MMH Dosimeter Badge

    ChemLogic - Hydrazine/MMH Dosimeter Badge

    DOD Technologies has introduced a cost effective Hydrazine/MMH Badge. Dosimeter badges have been a trusted form of gas detection for years.This dependable colorimetric system of personal monitoring is both cost effective and well proven.These badges are worn by individuals and change color if exposed to specific target gas.Once the color change occurs it is then compared to a color estimator to determine the concentration of the exposure.

  • ChemLogic - Phosgene (COCL2) Dosimeter Badges & Estimators

    ChemLogic - Phosgene (COCL2) Dosimeter Badges & Estimators

    DOD Technologies has introduced a cost effective 3 & 6 Day Phosgene Badges.  Dosimeter badges have been a trusted form of gas detection for years.  This dependable colorimetric system of personal monitoring is both cost effective and well proven.  These badges are worn by individuals and change color if exposed to specific target gas.  Once the color change occurs it is then compared to a color estimator...

  • ChemLogic - Model TDI - Dose Estimator

    ChemLogic - Model TDI - Dose Estimator

    TDI Dose Estimator commonly used with our TDI Badges. Use this Estimator to gauge the PPB range per hour of TDI present. Align the badge or ChemLogic sample to the correct color to determine results.

  • DOD Technologies - Portable Gas Detectors

  • ChemLogic - Model CLPX - Portable Gas Detection System

    ChemLogic - Model CLPX - Portable Gas Detection System

    The Next Generation Chemlogic Portable gas detection system is a handheld life saver. Used in several applications for quick, low-level gas detection, the CLPX boasts an easy to use interface with a simple replaceable, inexpensive, chemlogic tape cartridge. While detecting gas at low levels, this portable gas monitor offers rechargeable gas detection at an affordable price. Perfect for confined space, exterior sampling, or during a spill cleanup, the...

  • IsoSense - Sampling Unit for MDI or TDI

    IsoSense - Sampling Unit for MDI or TDI

    The IsoSense is a portable and economical sampling device ideal for measuring vapor and aerosol levels of isocyanate compounds (TDI & MDI) down to 1 ppb. Specially designed for personal exposure evaluations, area surveys and emergency response.

  • DOD Technologies - Controllers

  • DOD - Model PS-7000 - 16 Channel Controller - Graphic Display / Alarm Controller

    DOD - Model PS-7000 - 16 Channel Controller - Graphic Display / Alarm Controller

    The DOD Technologies PS-7000 Graphic Display / Alarm Controller is designed to provide simultaneous display and alarm functions for up to 16 input variables. A graphic LCD display monitors data as trends, bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons horns and other alarm events. The PS-7000 is easy to configure and user friendly.

  • DOD - Model PS-7064 - 16-64 Channel Controller - Graphics Display/Alarm Controller

    DOD - Model PS-7064 - 16-64 Channel Controller - Graphics Display/Alarm Controller

    The DOD Technologies PS-7064 Graphics Display/Alarm Controller is designed to provide simultaneous display and alarm functions for up to 64 input variables. The PS-7064 is easy to configure and user friendly. Standard features such as measurement ranges in engineering units, configurable alarms, serial / Ethernet ports, embedded web pages, SD card and many others combine to allow the PS-7064 to satisfy the needs of the many demanding applications.

  • Gas Detectors

  • Tiger - Model Select - Portable Benzene Gas Detector

    Tiger - Model Select - Portable Benzene Gas Detector

    The Tiger Select measures benzene selectively by use of a special sensor and a pre-filter tube in front of the PID to remove interfering chemicals present in fuel vapors.  A special mode is provided to measure total aromatics on a continuous basis. The Tiger Select Basic Instrument with 10.0eV Lamp includes: Li-ion Rechargable Battery, Battery Charger & Outlet Adaptor, Rubber Boot, Explorer Case (space for 44L or 116L Ecosmart Cylinder), USB...

  • Tiger - VOC Portable Gas Detector

    Tiger - VOC Portable Gas Detector

    Tiger is the most advanced hand held VOC detector on the market with the widest measurement range, accurately detecting gases down to the ultra low ppb levels up to 20,000 ppm.  The internal gas table detects over 480 VOCs and toxic compounds.  Its patented Fence Electrode Technology with three electrode format and Anti-contamination design ensures optimal performance within humid and difficult working conditions, extending run time in the...

  • FALCO - Fixed VOC Detector

    FALCO - Fixed VOC Detector

    The ION Science FALCO Fixed VOC Detector is the latest generation of fixed photoionization detectors (PIDs) from ION Science that continuously detect a wide range of volatile organic compounds (VOCs). FALCO gives you cutting-edge performance, reliability, accuracy, and results that you can trust so you can be sure workers receive ongoing maximum protection. With its humidity...

  • Blackline Safety - Model G7c - Personal Monitor

    Blackline Safety - Model G7c - Personal Monitor

    Blackline Safety’s G7c leverages integrated 3G-cellular connectivity to wirelessly link your team to real people, while automating data analytics and compliance reporting. Should a gas leak, injury or health even occur, G7c confidently accounts for everyone’s wellbeing and whereabouts in real-time, so no call for help ever goes unanswered. Using the plug-and-play cartridges you can quickly switch between lone worker...

  • Gascheck - Model G - Handheld Helium Leak Detector

    Gascheck - Model G - Handheld Helium Leak Detector

    The GasCheck G gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels. Designed for the search and location of gas leaks, the GasCheck G leak detector provides you with effective detection of almost any gas or gas mixture. Robust and reliable, the GasCheck G leak detector...

  • Blackline Safety - Model G7x - Personal Monitor

    Blackline Safety - Model G7x - Personal Monitor

    Blackline Safety’s G7x system uses integrated satellite and cellular connectivity to wirelessly link employees and lone workers to real people, while automating data analytics and compliance reporting. Should a gas leak, injury, or health event occur, G7x confidently accounts for everyone’s well-being and whereabouts in real-time, so no call for help ever goes unanswered – even in the most remote locations. All safety incidents are...

  • New Cosmos - Model SDM-72 - Grease Steel Dust Meter

    New Cosmos - Model SDM-72 - Grease Steel Dust Meter

    The New Cosmos SDM-72 grease steel dust meter employs a magnetic balance type electromagnet induction method as the measuring principle, and is a useful simplified diagnosis tool for inspecting the abrasion status of bearings and gears.

  • New Cosmos - Model SDM-73 - Oil Steel Dust Meter

    New Cosmos - Model SDM-73 - Oil Steel Dust Meter

    The SDM-73 enables simple diagnosis and trend monitoring of the wear condition of bearings, gears, cylinders, etc. by checking steel dust concentration in lubricating oil. Enables simple diagnosis and trend monitoring of the wear condition of bearings, gears, cylinders, etc. by checking steel dust concentration in lubricating oil.

  • New Cosmos - Model XP-3160 - Portable Multi-Gas Detector (PPM Ranges)

    New Cosmos - Model XP-3160 - Portable Multi-Gas Detector (PPM Ranges)

    The XP-3160 is an economical portable combustible gas detection system for environmental and spot check applications. The XP-3160 features built-in correction factors and can be configured to detect up to 5 flammable gases at once. Select from over 20 gases in your custom configuration. Simple and reliable sensing allows you to use the XP-3160 with confidence. For the quick measurement of high concentration gases in the 0-2,000ppm, 0-5,000ppm and...

  • Gas Clip - Model MGC Simple - Multi Gas Clip Simple Portable Multi-Gas Detector

    Gas Clip - Model MGC Simple - Multi Gas Clip Simple Portable Multi-Gas Detector

    No charging ever! No calibration needed! Detects H2S, CO, O2 & combustible gases (LEL). Save time never having to charge or service your portable multi-gas detector! Reliably test for H2S, CO, O2 & combustible gases (LEL)) with this simple-to-use & simple-to-maintain detector. Just turn it on & have worry free assurance of protection against toxic gases 24/7 for two full years.

  • Gas Clip - Model MGC - Multi Gas Clip

    Gas Clip - Model MGC - Multi Gas Clip

    Battery life for months instead of hours! Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long...

  • Focused Photonics - Model RLGD-100 - Remote Methane Laser Detector

    Focused Photonics - Model RLGD-100 - Remote Methane Laser Detector

    The RLGD-100 Remote Laser Methane Detector is an easy-to-operate portable device, capable of detecting methane leads by pointing it towards the survey areas. Utilizing proprietary technology of Tunable Diode Laser Absorption Spectroscopy (TDLAS), the RLGD-100 only detects methane with no cross-interference. This unit also features an OFFSET function to further eliminate the methane in air from affecting detection accuracy. It enables easy access to...

  • DOD Technologies - Portable Gas Detector

  • Model XP-703D-III - Portable Gas Detector

    Model XP-703D-III - Portable Gas Detector

    The XP-703D-III Sample draw portable detector has been considered by many as the standard in the Semiconductor industry to locate leaking gas cylinders right off the delivery truck.  An upgraded version of the XP-703D, the XP-703D-III provides auto-zeroing, longer battery life and a more compact system that detects most of the main dopant gases used in the Semiconductor industry. Very low level detection limits (down to PPB) and quick response...

Products by Critical Environment Technologies Canada Inc. (CETCI)

  • IAQ Gas Detectors

    YES Indoor Air Quality monitors offer quality, reliability, and are well established and accepted worldwide. YES IAQ instruments are designed for short or long term indoor air quality monitoring and include temperature and humidity measurements and data logging, among many other features.

  • YESAIR 8 Channel IAQ Monitor

    YESAIR 8 Channel IAQ Monitor

    YES AIR offers flexible features and functionality with multi-channel operation, more than 30 different plug and play sensors to select from (including a particulate sensor), huge capacity data logging to SD flash card and much more. It has an eight channel sensor capacity including RH and temperature, and can handle up to five additional internal plug & play sensors consisting of a maximum of three electrochemical toxic gas or oxygen sensors plus...

  • YES Plus LGA 15 Channel IAQ Monitor

    YES Plus LGA 15 Channel IAQ Monitor

    YES Plus LGA is a multi-gas air quality monitoring and information recording instrument that simultaneously measures and records up to fifteen sensors. With more than 30 different plug and play sensors to select from, users can accurately monitor more within a single, easy to carry instrument.

  • Fixed Gas Detectors

    CETCI’s permanently installed, stationary gas detection systems provide continuous leak detection, flexible field configurations and robust functionality. Our self-contained systems, controllers and transmitters (analog, digital and wireless) are installed in commercial HVAC, institutional, municipal and light industrial markets worldwide. Many of these applications are for vehicle exhaust, but areas of specialization include refrigeration and food processing plants, commercial swimming pools,

  • ART Infrared Refrigerant Transmitter

    ART Infrared Refrigerant Transmitter

    The ART is a state-of-the-art, fixed, non-dispersive infrared refrigerant transmitter used to detect a wide range of refrigerant gases. The fast-responding sensor accurately detects refrigerant gas leaks without cross interference from combustible or toxic gases. It can be used as a stand alone system or integrated into a building management system (BMS). The ART can be connected to a gas detection system using analog output wiring or Modbus® network...

  • Self Contained Controller (SCC)

    Self Contained Controller (SCC)

    SCC Self Contained Controller combines toxic and/or combustible gas detection with basic control functionality for non-hazardous, non-explosion rated, commercial applications. Available in one or two channel configurations for monitoring toxic and/or combustible gas types by means of an integral electrochemical Carbon monoxide (CO) or Nitrogen dioxide (NO2) sensor and one of three remote catalytic combustible sensors used to detect Hydrogen (H2),...

  • DCC Dual Channel Controller

    DCC Dual Channel Controller

    The DCC Dual Channel Controller is a self contained gas detection system that offers one or two channel configurations for monitoring toxic, combustible and refrigerant gases. Sensor configurations include, two internal electrochemical sensors (one must be CO), or one internal electrochemical and one remote sensor (catalytic, solid state or a remote 4-20 mA transmitter). Field configurable settings are done through an easy to navigate, password...

  • QCC Quad Channel Controller

    QCC Quad Channel Controller

    The QCC Quad Channel Controller offers four channel configurations for monitoring toxic, combustible and/or refrigerant gases. It is designed to accept inputs from up to four remote digital and/or analog transmitters using digital or 4-20 mA analog input. The QCC is available in two models, the QCC-M with Modbus® RS-485 output or the QCC-B with BACnet® RS-485 output for communicating with a Building Automation System (BAS). Standard features...

  • FCS Flexible Control System

    FCS Flexible Control System

    The FCS Flexible Control System is a sophisticated, high performance Controller that offers up to 128 gas channel configurations for monitoring toxic, combustible and refrigerant gases with versatile control functionality for non-hazardous, non-explosion rated, commercial and light industrial applications. The FCS is designed to accept inputs from digital and analog transmitters and/or Peripheral Devices (in various combinations), using Modbus® RS-485 or...

  • LPT-A Analog Gas Detector

    LPT-A Analog Gas Detector

    The LPT-A is an economical, single sensor, analog transmitter available with a wide range of gas sensors and sensor types including electrochemical, solid state, and catalytic. It is a full featured, standalone transmitter that offer three-wire VDC or four-wire VAC power, jumper selectable 4 - 20 mA or 0 - 10 VDC analog output, standard dry contact relay (2 amps @ 30 V SPDT), automatic thermal resetting fuse, temperature compensation, back lit LCD...

  • CXT Explosion Proof Gas Detector

    CXT Explosion Proof Gas Detector

    The CXT monitors toxic and combustible gases in potentially explosive and harsh environments, including hazardous-rated areas. The rugged explosion proof housing offers protection from being damaged by impact type incidents and is capable of containing, controlling and venting any possible flash or explosion. The large LCD display shows gas concentrations and engineering units as well as historical data for the last 30 minutes. Navigation through the...

  • AST-IS Industrial CO2 Gas Detector

    AST-IS Industrial CO2 Gas Detector

    The AST-IS Industrial Transmitters contain a non-dispersive, infrared sensor for accurate and reliable carbon dioxide (CO2) detection and are available in 3models with different options. All models are maintenance free and a key component for climate control of buildings and other processes. AST-IS3 is a duct mount, IP54 rated enclosure for installation in the ventilation duct. AST-IS6 is a wall mount enclosure with protection class IP65, includes...

  • AST-IS Standard CO2 Gas Detector

    AST-IS Standard CO2 Gas Detector

    The AST-IS standard transmitters contain a non-dispersive, infrared sensor for accurate and reliable, indoor, carbon dioxide (CO2) detection and are available in 3 models with different options. All models are maintenance free and a key component for climate control of buildings and other processes. AST-AS1 is a simple, low-cost, transmitter without a display for fixed installation in the climate zone. AST-IS5 measures both CO2 and temperature in...

  • DCC-MRI Oxygen Sampling System

    DCC-MRI Oxygen Sampling System

    The DCC-MRI is a self-contained Oxygen (O2) monitoring system developed for Magnetic Resonance Imaging (MRI) room applications for hospitals and clinics. Due to the strong magnetic field inside the MRI room, electronic equipment does not operate properly when mounted inside the room. The DCC-MRI system is designed to be installed outside of the MRI room with a sample tubing running from the monitoring system to the sampled environment. The DCC-MRI...

  • LPT-B BACnet® Gas Detector

    LPT-B BACnet® Gas Detector

    The LPT-B is a full featured, 3 channel, digital transmitter for use in non-hazardous, non-explosion rated, commercial and light industrial applications. It is available with a wide range of internal and/or external sensors and sensor types including electrochemical, solid state, catalytic and PID. It offers a BACnet® MS/TP output signal for communicating with a Controller or Building Automation System, an audible internal alarm, one SPDT dry contact...

  • LPT-P Digital Car Park Gas Detector

    LPT-P Digital Car Park Gas Detector

    The LPT-P is an economical, 3 channel, digital transmitter that is designed to be part of a gas detection system for enclosed parking garage/car park and vehicle repair shop applications. It can be configured with a single and/or dual internal electrochemical Carbon monoxide (CO) and/or Nitrogen dioxide (NO2) sensor and/or one catalytic combustible ESH-A Remote Sensor. The LPT-P comes in a standard water / dust tight, corrosion resistant ABS /...

  • LPT-M Modbus® Gas Detector

    LPT-M Modbus® Gas Detector

    The LPT-M is a full featured, three channel, digital transmitter for use in non-hazardous, non-explosion rated, commercial and light industrial applications. It is available with a wide range of internal and/or remote sensors and sensor types including electrochemical, solid state, catalytic and PID. The LPT-M may be configured to operate as a standalone fixed system or be part of a digital network. It offers a Modbus® RS-485 RTU output signal for...

Products by Ion Science Ltd.

  • Application Kits

    ION Science introduce the first in our series of Application Kits. We have specifically designed conveniently packaged, off the shelf Kits specific to your VOC detection application! First in line is the Fire Investigation Kit for instant VOC detection for Fire and Arson investigation.

  • ION - Fire Investigation Kit

    ION - Fire Investigation Kit

    The ION Science Fire Investigation Kit with Tiger or TigerLT photoionisation detector (PID) has been specifically designed to provide you with all the tools for a convenient, easy-to-use solution for the detection of volatile organic compounds (VOCs) within Fire and Arson Investigation applications. Fire investigation teams are responsible for the examination and assessment of suspected arson-related sites, and further analysis of suspicious...

  • Ion Science Calibration

    ION Science recommends that your instruments are re-calibrated on an annual basis to ensure they continue to provide you with accurate, reliable results and that they maintain their extended warranty.

  • ION - Standard Calibrated Leaks

    ION - Standard Calibrated Leaks

    Ion Science calibrated leaks are small fittings that deliver a specific gas leak rate, often used to set pass/fail thresholds on leak detection systems or leak detection instruments. Each leak is made to order to your specified leak rate, gas and pressure which must be specified at placement of your order.

  • ION - Calibration Kits for VOC Gas Detector

    ION - Calibration Kits for VOC Gas Detector

    Calibrating your Ion Science gas detector ensures safe operation and functionality to meet your required regulations and code of practice. Our calibration kits can be purchased with demand flow or flow regulators and can be supplied with a wide variation of gas concentrations. Each kit is supplied in a robust protective case and is supplied with 600mm of pipe for convenient connection.

  • Instruments - Disc Pumps

  • Ion Science - Disc Pump Evaluation Kit

    Ion Science - Disc Pump Evaluation Kit

    The Evaluation Kit has been designed for you to easily and rapidly test Disc Pump straight out of the box. The kit includes two pumps and all the supporting electronics/PC software to run the pump at your application requirements. Product assessment has never been easier. Disc Pump is a multi award-winning micropump platform, which is enabling innovation across sectors from medical and life sciences, to environmental and defence through wearability,...

  • Ion Science - Model BL Series - Disc Pump

    Ion Science - Model BL Series - Disc Pump

    Our entry-level BL Series strikes a balance between performance and cost. In common with all Disc Pumps. BL Series devices combine silent operation, pulsation-freeflow, millisecond response and high precision in a compact form factor.

  • Ion Science - Model XP Series - Disc Pump

    Ion Science - Model XP Series - Disc Pump

    The XP Series offers our highest performance, efficiency and widest operating temperature range of -25 to 55°C to suit the most demanding applications. Our highest-performance, efficiency and widest temperature range. Tightening legislation and the growing global focus on air quality, worker safety and environmental emissions are driving the requirements for a new generation of measurement and monitoring systems. With its combination of high...

  • Instruments

  • Ion Tiger - Handheld Humidity-Resistant VOC Detector

    Ion Tiger - Handheld Humidity-Resistant VOC Detector

    The Tiger handheld VOC detector is a revolutionary handheld gas detection instrument for the rapid, accurate detection of volatile organic compounds (VOCs) within the harshest of environments. Tiger incorporates Ion Science patented photoionisation detection (PID) sensor technology with humidity resistance and anti-contamination design, proven to dramatically extend run time in the field.  A robust VOC detector Tiger provides a dynamic detection...

  • Ion Tiger - Model LT - Entry-Level Handheld VOC Gas Detector

    Ion Tiger - Model LT - Entry-Level Handheld VOC Gas Detector

    TIGERLT is an entry-level handheld VOC detector that provides fast, accurate, reliable results, however challenging your environment. This variant of the hugely popular Tiger VOC detector is low on cost but high on performance. Its revolutionary, patented photoionisation detection (PID) sensor technology with humidity resistance and anti-contamination design provide market leading accuracy and run-time. Combined with 24-hour battery life, its features...

  • Ion Tiger Select - Benzene & Total Aromatic Compound (TAC) Gas Detector

    Ion Tiger Select - Benzene & Total Aromatic Compound (TAC) Gas Detector

    The Tiger Select is revolutionary handheld VOC detector with two mode operation for rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data. The Tiger Select is a revolutionary hand-held gas detector for the rapid, accurate detection of benzene and Total Aromatic Compounds (TACs). Utilising the high output Ion Science 10.0 eV detection system, a reading for TACs is seen immediately on start-up. Should aromatics...

  • Ion Cub - Personal VOC Detector

    Ion Cub - Personal VOC Detector

    Cub is a personal VOC detector with photoionisation detection (PID) technology for the fast, accurate detection of volatile organic compounds, keeping you safe within your working environment. With market leading parts-per-billion (ppb) sensitivity, Cub sets the standard in personal gas monitoring giving an early warning of exposure to hazardous gases.

  • Ion CubTAC - Personal VOC Detector for TACs and Benzene

    Ion CubTAC - Personal VOC Detector for TACs and Benzene

    CubTAC is a personal benzene detector for the fast, accurate detection of total aromatic compounds (TACs), including benzene, keeping you safe within your working environment. Comfortable and unobtrusive to wear, CubTAC is the smallest, lightest, personal TAC and benzene detector available.

  • Ion Falco - Fixed VOC Detector

    Ion Falco - Fixed VOC Detector

    Falco is the latest generation of fixed VOC detectors that continuously detect a wide range of volatile organic compounds (VOCs) using patented photoionisation detection (PID) technology.

  • Ion Titan - Fixed Benzene-Specific Monitor

    Ion Titan - Fixed Benzene-Specific Monitor

    Titan is the world's first fixed, continuous, benzene-specific monitor. Designed for petrochemical environments, Titan monitors benzene in real-time providing the ultimate device for plant and worker safety. Set to change the game in refinery applications, Titan is the first truly selective fixed benzene monitor on the market. Titan is a fixed, continuous, real-time, benzene-specific monitor designed for petrochemical environments, providing the...

  • ION TVOC - Model 2 - Fixed PID Detector for Continuous VOC Monitoring

    ION TVOC - Model 2 - Fixed PID Detector for Continuous VOC Monitoring

    TVOC 2 is a fixed, continuous VOC monitor for the fast, accurate detection and measurement of total volatile organic compounds within industrial working environments. TVOC is a fixed continuous PID detector for the detection and measurement of total volatile organic compounds (TVOCs). Its photoionisation detection (PID) sensor capabilities utilise advanced patented Fence Electrode technology with increased resistance to humidity and contamination.

  • Ion GasCheck - Model G - Handheld Helium Leak Detector

    Ion GasCheck - Model G - Handheld Helium Leak Detector

    The GasCheck G gas leak detector is a handheld, low-cost leak detection instrument that provides you with effective detection of almost any gas or gas mixture. The GasCheck G gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels.

  • Ion GasCheck - Model Tesla - Handheld Helium Leak Detector for MRI Scanner Maintenance

    Ion GasCheck - Model Tesla - Handheld Helium Leak Detector for MRI Scanner Maintenance

    GasCheck Tesla is a highly sensitive helium leak detector designed for effective use within high magnetic fields found around the outside of Magnetic Resonance Imaging (MRI) scanners. GasCheck Tesla is a highly sensitive helium leak detector designed for effective use within high magnetic fields found around the outside of Magnetic Resonance Imaging (MRI) scanners. The instrument's advanced micro thermal conductivity sensor provides rapid, accurate...

  • Ion - Model MVI - Mercury Vapour Detector

    Ion - Model MVI - Mercury Vapour Detector

    The Mercury Vapour Indicator (MVI) is a revolutionary mercury detector, detecting mercury vapours in just 3 seconds! The instrument’s dual beam UV absorption technology means MVI does not saturate or need regenerating between readings – like traditional gold film detection methods – eliminating instrument downtime. Fast and accurate, the MVI mercury detector gives a real-time response and is ready to detect instantly. MVI provides...

  • Ion AreaCheck - Model P2 - Fixed SF6 Leak Detector

    Ion AreaCheck - Model P2 - Fixed SF6 Leak Detector

    The SF6 AreaCheck P2 is an award winning, highly sensitive leak detector designed for continuous area monitoring, protecting both workforce and the environment. Designed for fixed continuous SF6 area monitoring, the AreaCheck P2 with award winning Negative Ion Capture (NIC) technology rapidly detects low-level SF6 leaks. This fixed SF6 leak detector utilises relay output for immediate awareness of detected leaks and presents no cross sensitivity with...

  • Ion GasCheck - Model 6000 - Portable SF6 Leak Detector

    Ion GasCheck - Model 6000 - Portable SF6 Leak Detector

    The SF6 GasCheck 6000 leak detector is a great device for portable SF6 leak detection. In practical use, it has a detection threshold of 1 x 10-6 mbar l/s, which makes it perfectly suitable for simple leak detection applications on SF6 switchgear.

  • Ion LeakCheck - Model SF6 P1:p - Portable SF6 Leak Detector

    Ion LeakCheck - Model SF6 P1:p - Portable SF6 Leak Detector

    SF6 LeakCheck P1:p with award winning Negative Ion Capture (NIC) technology is designed for the location, leak testing, and measurement of SF6 leaks in high voltage electrical switchgear. The revolutionary SF6 leak detector rapidly detects leaks down to 1 x 10-8 ml/sec, with a response and clear down of less than 1 second. The instrument’s award winning Negative Ion Capture (NIC) technology with non-radioactive source eliminates problems of...

  • PID Sensors

    We manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our PID sensor technology trusted by major gas detection manufacturers, globally. Our patented PID sensor technology is proven to resist humidity and contamination, giving you outstanding results when detecting volatile organic compounds (VOCs) within the most challenging environments.

  • ION - Model SDK - Sensor Development Kit

    ION - Model SDK - Sensor Development Kit

    The Sensor Development Kit offers a simple, efficient and cost-effective way to test and integrate the Ion Science photoionisation detection (PID) sensors into any system. SDK comprises two printed circuit boards (PCBs); the Sensor PCB and the Integration PCB.  Both PCBs have a small footprint and can be easily fitted into existing original equipment manufacturers (OEMs) equipment and systems. A PCB mounted gas delivery hood is available which...

  • Ion - Model MiniPID 2 PID PPM - Photoionisation Detection (PID) Sensors

    Ion - Model MiniPID 2 PID PPM - Photoionisation Detection (PID) Sensors

    Our PPM sensor is designed for detecting VOCs over the widest dynamic range on the market without compromising performance. It is also the only PID sensor with a lamp out diagnostic. Designed for OEMs, we manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our sensor technology trusted by major gas detection manufacturers, globally. Our patented Fence Electrode Technology is proven to resist...

  • Ion - Model MiniPID 2 PID 11.7 eV - Photoionisation Detection (PID) Sensors

    Ion - Model MiniPID 2 PID 11.7 eV - Photoionisation Detection (PID) Sensors

    Designed for OEMs, we manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our sensor technology trusted by major gas detection manufacturers, globally. Our patented Fence Electrode Technology is proven to resist humidity and contamination, giving you outstanding results when detecting volatile organic compounds (VOCs) within the most challenging environments. Only available from Ion Science, the...

  • Ion - Model MiniPID 2 PID 10.0 eV - Photoionisation Detection (PID) Sensors

    Ion - Model MiniPID 2 PID 10.0 eV - Photoionisation Detection (PID) Sensors

    Designed for OEMs, we manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our sensor technology trusted by major gas detection manufacturers, globally. Our patented Fence Electrode Technology is proven to resist humidity and contamination, giving you outstanding results when detecting volatile organic compounds (VOCs) within the most challenging environments. The 10 eV sensor is used for...

  • Ion - Model MiniPID 2 PID PPB - Photoionisation Detection (PID) Sensors

    Ion - Model MiniPID 2 PID PPB - Photoionisation Detection (PID) Sensors

    Designed for OEMs, we manufacture and supply more photoionisation detection (PID) sensors than any other company in the world with our sensor technology trusted by major gas detection manufacturers, globally. Our patented Fence Electrode Technology is proven to resist humidity and contamination, giving you outstanding results when detecting volatile organic compounds (VOCs) within the most challenging environments. The PPB sensor is optimised to...

  • Ion - Model MiniPID 2 HS - Photoionisation Detection (PID) Sensors

    Ion - Model MiniPID 2 HS - Photoionisation Detection (PID) Sensors

    The Ion Science MiniPID 2 HS is a simple plug and play sensor designed to detect a wide range of volatile organic compound gases (VOCs) at sub ppb concentrations. Designed for OEMs, the MiniPID 2 HS high sensitivity PID sensor is the latest in the range of PID sensors from Ion Science for sub-ppb level detection. The ground-breaking MiniPID 2 HS is 15 times more sensitive than the existing MiniPID 2 ppb sensor. It is capable of detecting trace levels...

Products by Crowcon Detection Instruments Ltd

  • Portable Gas Detectors

    Crowcon provide both single gas and multigas monitors for personal monitoring and portable safety applications providing protection against a wide range of industrial gas hazards. Models vary by size and complexity depending on the number and type of gas sensors used, display and certification but it is Crowcon’s philosophy that each should be properly suited to its task.

  • Crowcon - Model Gasman - Intrinsically Safe Single Gas Personal Monitor

    Crowcon - Model Gasman - Intrinsically Safe Single Gas Personal Monitor

    The Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedised for the toughest of industrial environments. Featuring simple single button operation, it has a large easy-to-read display of gas concentration, and audible, visual and vibrating alarms.

  • Crowcon - Model Tetra 3 - Top Display Personal Multi-Gas Monitor

    Crowcon - Model Tetra 3 - Top Display Personal Multi-Gas Monitor

    The Tetra:3 multi-gas monitor is a compact, robust and easy-to-use diffusion based detector. Single button operation, small size and clear top-mounted display make it a favourite in the market amongst those working in demanding industrial environments such as those in the water, telecoms, food, brewing or hydrocarbons sectors. Gases include the most common four (carbon monoxide, methane, oxygen and hydrogen sulphide), but also an expanded range:...

  • Crowcon - Model Triple Plus+ - Iconic Multi-Gas Portable Monitors with IR Option

    Crowcon - Model Triple Plus+ - Iconic Multi-Gas Portable Monitors with IR Option

    Triple Plus+ is the latest generation of the respected 'Triple' family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

  • Crowcon - Model Detective+ - Portable Multi-Gas Area Monitor

    Crowcon - Model Detective+ - Portable Multi-Gas Area Monitor

    Designed for group protection, area monitoring and providing a virtual fenceline, Detective+ is a rugged, interconnectable, multigas temporary area monitor. Building on Crowcon's experience in pioneering this category of detector, Detective+ has earned a reputation for reliability and versatility in demanding environments stretching from offshore platforms to the sands of the Middle East. Rugged & robust, Detective+ features either fixed or...

  • LaserMethane - Model Mini (LMm) - Innovative Long-range Portable Detector

    LaserMethane - Model Mini (LMm) - Innovative Long-range Portable Detector

    The LaserMethane mini (LMm) is an innovative portable detector that allows methane gas to be detected from a distance. This enables easy access to hard-to-reach locations, such as elevated piping or locked premises, and helps keep the operator away from potential leak sources. NEW! LMm is now available with a green laser guide light which is more visible especially under strong sunlight. The Laser Methane Mini-Green (LMm-G) combines the benefit of LMm...

  • Crowcon Gas-Pro - Multi-gas Confined Space Entry Monitor

    Crowcon Gas-Pro - Multi-gas Confined Space Entry Monitor

    Gas-Pro CSE Monitor is THE confined space entry monitor solution for workers and fleet managers. Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy to read top mount display combining ease of use with user focused features.

  • Crowcon - Model Clip - Maintenance Free Single Gas Monitor

    Crowcon - Model Clip - Maintenance Free Single Gas Monitor

    Reliable and durable fixed life monitoring in a compact and maintenance free package, the Crowcon Clip has a 2 year life and is available for hydrogen sulphide (H2S), carbon monoxide (CO) or oxygen (O2). Now supported by the Crowcon C-Test which provides bump testing, event management and calibration from a simple to use wall mount station and gives fleet or safety managers the ability to update configurations on large fleets. It also maintains the...

  • Crowcon - Model I-Test - Bump Test and Calibration Manager Solution

    Crowcon - Model I-Test - Bump Test and Calibration Manager Solution

    I-Test is Crowcon’s newest solution to test and verify that your Gas-Pro is in a compliant state for you to carry out your daily work.  Bump testing standards are getting tighter in all regions and the need for the control of the bump and calibration records is a must.  The I-Test and I-Test manager makes this as easy as it can be.

  • Model Detective+ - Detective Wireless Will Transmit Gas Alert Signals

    Model Detective+ - Detective Wireless Will Transmit Gas Alert Signals

    Detective Wireless is a module that can replace interconnecting cables for Detective and Detective+. Detective Wireless will transmit gas alert signals and other alarms wirelessly between Detective units using a 433MHz signal up to 100 metres in distance. Detective Wireless uses the proven RICOCHET mesh network. When establishing a mesh network, Detective Wireless automatically selects the best line to give strongest interconnections. Should wireless...

  • Crowcon - Model Gas-Pro PID - Portable Gas Detector

    Crowcon - Model Gas-Pro PID - Portable Gas Detector

    Gas-Pro PID gives you full flexibility with a wide range of gas types to choose from. With an optional pump, the Gas-Pro PID is the perfect product addressing the requirements of a wide range of applications. Gas-Pro PID utilises the Photo Ionization Detection technology to allow you to detect hundreds of Volatile Organic Compounds (VOCs). If you are working in an environment that is high in levels of solvents, glues, paints and general VOCs, the...