Dolphin Pumps products

The best alternative and solution for pump replacement. Efficient, quiet and cool running pumps to line up with plumbing required by most bargain pumps offered from other manufacturers. This pump is superior by means of our high quality motors, advanced seal system and efficient impellers that increase the volume being pumped. Built to consume the lowest amount of energy per gallon pumped. Flow rates may be dialed back by a ball valve with no harm to the pump. Current draw drops as flow is reduced.

Dimensions 12” x 6 1/4” x 81/4”. Quiet, cool running. 1/3 HP, 115VT, 60 HZ MOTOR, 1725 RPM. Circulates 6250 GPH without heat transfer when well ventilated. Factory warranty 2-3 years (dependent on seal selection). Suggested use: 180 gallons and over. Supplied with 1.5” super seal solid unions and anti-vibration pump pad. Watts @ 115 VAC  Average range 402.5 - 518 (dependent on head feet).

Dimensions 12” x 6 1/4” x 81/4”. Silent, cool running. 1/15 HP, 115VT 60 HTZ MOTOR, 1725 RPM. Circulates 3500 GPH without heat transfer. Factory warranty 2-3 years (dependent on seal selection). Suggested use: 55 gallon and over. Supplied with 1.5” super seal solid unions and anti-vibration pump pad. Watts @ 115 VAC  Average range 103.5 - 115 (dependent on head feet).

Dimensions 12” x 6 1/4” x 81/4”. Near silent, cool running. 1/15 HP, 115VT 60 HTZ MOTOR, 1725 RPM. Circulates 4750 GPH without heat transfer. Factory warranty 2-3 years (dependent on seal selection). Suggested use: 120 gallon and over. Supplied with 1.5” super seal solid unions and anti-vibration pump pad. Watts @ 115 VAC  Average range 115 - 173 (dependent on head feet).

Dimensions 12 ½” x 6 ¼” x 7 ¼”. Continuous duty, weatherproof motor and dual-sealed bearings. Compact 1.5” discharge, high head, and low current draw. 3/4 HP 3450RPM. Circulates 7450 GPH. Factory warranty 1-3 years (dependent on seal selection). Suggested use: systems requiring high-pressure and lo. Volt: 115. Supplied with 1.5” super seal unions and anti-vibration pump pa.

Dimensions 13” x 6 1/4” x 7 1/4”. Corded. Continuous duty, weatherproof motor and dual-sealed bearings. Compact 1.5” Discharge, High Head, High Flow. 1HP. Circulates 9250 GPH. Factory warranty 1-3 years (dependent on seal selection). Suggested use: systems requiring high-pressure and flow. Volt: 115, 50/60Hz. Supplied with 1.5” super seal unions and anti-vibration pump pad.

Dolphin seals are custom designed and engineered to outperform and outlast all other pump seals on the market. Dolphin recommends type 3 abrasive proof seals for all reef and coral containing marine aquariums since these marine environments are all considered abrasive. The type 3 seals are designed to handle this environment with the reliability of a magnetic drive pump without all the drawbacks, such as heat transfer, noise, and energy consumption. All of our type 3 and diamond type 4 sealed amp master pumps include a 3-year factory warranty. For freshwater use the new fringe tech series type 2 seal design and surfaces are designed to provide a much longer service life than any other fresh water pump.