Refine by
Companies Equipment & Supplies
114 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - MVL is for use in multiple scanner systems that include the 3D visualization feature. It features a 7.67" diameter horn, 20-36 VDC, 4-20 mA output, Modbus, and RS-485 communications.When used in a multi-scanner system, it provides accurate readings of level and volume for stored materials based on two or more synchronized MVL ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-41 - Vibrating probe level sensor with pipe extension, 20 to 250V AC/DC, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light. Must add pipe extension. Ordinary ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO AUTO-CAL 230 Power Pac delivers simple, reliable point-level detection with the convenience of automatic calibration. Operating on 230 VAC, it uses a magnetic trigger so setup and testing can be completed in minutes without removing the cover. Designed for precision, it offers sensitivity down to 0.5 pF and an adjustable time delay of up to 10 seconds to virtually eliminate ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The DPM-400 loop-powered digital panel meter allows you to install a local display right where you need it. No power, no problem. This digital panel meter is powered by an existing 4-20 mA loop, making it an ideal display solution for any of your 4-20 mA sensors. It features a dual-line display with a 5-digit alphanumeric top line and an 8-digit alphanumeric bottom line. A common level sensor ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 25' LV 12-24 Power Pac offers maximum flexibility by positioning the electronics up to 25 feet from the sensing probe—ideal for installations in compact or hard-to-access areas. Powered by 12-24 VAC/DC, it features straightforward “Quick-Set” calibration, adjustable time delay to reduce false triggers, and PRO-Shield technology to counter material ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Tilt switch extension float, 5” diameter, 1/4” NPT machined, stainless ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-120 - Vibrating probe level sensor with 7.37” insertion length, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MR-G-220 - Mini-Rotary 220 VAC with 4-vane, polycarbonate paddle, complete with SPDT contacts. This economical and compact mini rotary paddle level indicator is designed for controlling material levels in smaller bins and hoppers where other types of equipment simply won't ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6”x 1” Diameter stainless steel shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D acoustic level sensor RL - standard with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 15º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for Class I, II, Division 1, ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21 - Vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light. Ordinary ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Mini-Rotary single-vane, stainless steel rectangular paddle turns in a 4” diameter, paddle blades are 1.2” wide wide for 8 mm ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VF-92 - Vibrating fork level sensor with 316L stainless steel 5.91” tuning fork with hanging cable extension. Available in lengths up to 240 ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
4” x 1” Diameter Galvanized shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO Remote 25' 115 VAC Power Pac delivers flexible, dependable point-level detection by allowing the electronics to be mounted remotely—up to 25 feet from the sensing probe. Powered by 115 VAC, it ensures reliable performance across bulk solids, powders, liquids, and slurries. Featuring intuitive “Quick-Set” calibration, adjustable time delay, and PRO-Shield ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MR-I-110 - Mini-Rotary 110 VAC with single-vane, stainless steel rectangular paddle, complete with SPDT contacts. This economical and compact mini rotary paddle level indicator is designed for controlling material levels in smaller bins and hoppers where other types of equipment simply won't ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Replacing BinMaster’s SHT-120, the VRX61 vibrating probe level sensor for high temperatures is designed for use in harsh processing environments up to 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The CNCR-230 compact 80 GHz non-contact radar with window display is for distances up to 49 ft (15 M). It installs using a 1.5” threaded NPT or 1.5” threaded straight NPT connection. The enclosure is rated IP66/IP67, Type 4X to protect from dust and water damage. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-93 - Vibrating probe level sensor with 4.92” buildup resistant round rod and rod extension. Available in lengths up to 120 ...