Drainchem Pty Ltd products

The WV-1/4™ uses the new flow-through technology and features a revolutionary high-speed design with no high pressure seals or bearings to service. It cleans lines as small as 50mm with long sweeping elbows. This new design also features permanent, pre-drilled orifices. The tool operates from 100-275 bar and 11-30 l/min. It has a 1/4” NPT pipe thread inlet and if a 1/4” NPT hose fitting is used the tool can pass through long radius elbows in 50mm and larger lines. There are no maintenance or overhaul kits due to the low maintenance design. Please contact us, for more information regarding hose requirements.

Our smaller Warthog sewer models have all the powerful features of the larger tools, but can negotiate elbows and clean-outs commonly found in laterals from homes, buildings, restaurants and other light commercial facilities. The WT-3/8-C is designed specifically to handle 75mm - 150mm lines and clean-outs. This tool is most commonly used an small capacity pumps and cart jetters. We’ve added permanent carbide buttons to the WT-3/8-C model, specifically designed to handle demanding applications. Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8 models. The WT-3/8-C features a 3/8 npt or BSPP inlet port.

Standard Sewer jetting hose for water basting applications. Light weight, resistant to microbiological degradation and typically used by domestic plumbers. YELLOW colour indicates 5000 psi working pressure with 2.5 to 1 safety factor. Higher pressure hoses are available on request using Aramid fibre. Available as 60m assemblies with BSP male ends or in bulk reels. (Fittings also available.)

Standard Sewer jetting hose for water basting applications. Light weight, resistant to microbiological degradation and typically used with lateral sewer line cleaning equipment. GREEN colour indicates 4000 psi working pressure with 2.5 to 1 safety factor. Higher pressure or smaller O.D. hoses are available on request using Aramid fibre. Available as assemblies with BSP male ends or in bulk reels. (Fittings also available.).

Standard Sewer jetting hose for cleaning vehicles and equipment. Resistant to microbiological degradation and typically used with Sewer jetting trucks. ORANGE colour indicates 2500 psi working pressure with 2.5 to 1 safety factor. Bonded tube and cover and available as assemblies of various lengths. Swaged fittings are NPT male and NPSM swivel female at each end.

The “Blaster” jetting skid has been designed as powerful drain cleaner for pipes up to 300mm in diameter. Using the reliability and power of a water cooled diesel to gearbox drive high performance Comet water pumps with matching sewer hose ensures the longest drains can be cleaned and cleared fast. 400 litres of on board water allows for cleaning independently of a water supply. This unit is available as a skid mount unit for mounting on your truck, Ute or 6x4 trailer.

High Expansion Pipe Plugs 1" and Larger. Industrial Ballistic Nylon Outer Ply. Smallest deflated size toinstall through tiny openings. Higher pressure and more robust than typical "Gas Plugs".

Multi-Flex Heavy Duty Plugs Sizes: 50mm to 1829mm Without By-Pass.

User friendly. Exceeds industry standards. Fits up inside pipe. Custom sizes made to order. Long extension T-handle. Large test-thru port. Separate read back port.

Economical, rust-proof and reusable. Positive sealing. Tests up to 50 feet of head pressure.