Dynamic Air Inc. products

The HDP 2000 Fluidizing Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity, batch conveying system. It is generally used for conveying medium to high density, heat sensitive, semi-abrasive and/or abrasive materials under 100 mesh particle sizes. Examples include bentonite, cement, starch, silica flour, ball clay, kaolin clay, and alumina.

The HDP 3000 Conventional Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity batch type conveying system. It is generally used for conveying high to medium density, heat sensitive, semi-abrasive and/or very abrasive, cohesive and/or very fragile materials in almost any particle size range. Examples include silica sand, glass batch, granulated sugar, powdered sugar, plastic pellets, bentonite, cement, starch, silica flour, ball clay, kaolin clay, zinc oxide and alumina.

The HDP 4000 Full Line Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity, batch type conveying system. It is generally used for conveying medium to high density, heat sensitive, semi-abrasive and/or very abrasive, cohesive, and/or very fragile materials in almost any particle size range over long distances. Examples include silica sand, glass batch, granulated sugar, powdered sugar, finished breakfast cereal, coffee beans, plastic pellets, bentonite, cement, starch, silica flour, ball clay, kaolin clay, zinc oxide and alumina.

The LDV 2000 Vacuum Concept Conveying System is a dilute phase, high velocity, low pressure, continuous vacuum conveying system for shorter distances. It is generally used to convey low to medium density and non-abrasive materials. Examples include flour, kaolin clay, plastic pellets, grain, malt, corn, starch and plastic resin.

The LDV 4000 Vacuum Concept Conveying System is a dilute phase, medium to high velocity, low pressure, continuous vacuum conveying system for shorter distances. It is generally used to convey low to high density, non-abrasive and semi-abrasive materials. Examples include iron oxide, titanium dioxide, silica flour, cement, and limestone.

The HDV 6000 Vacuum Concept Conveying System is a dense phase, medium velocity, high pressure, continuous vacuum conveying system. It is generally used to convey low to high density, granular or pelletized, and semi abrasive materials. Examples include plastic pellets, granulated sugar, salt, coffee beans, pinto beans, and peanuts.

The HDV 8000 Vacuum Concept Conveying System is a dense phase, low to medium velocity, high pressure, continuous vacuum conveying system. It is generally used to convey low to high density, friable, and abrasive materials and/or other materials where degradation or abrasion is a concern. Examples include plastic pellets, breakfast cereal, granulated sugar, salt, coffee beans, pinto beans, finished detergent, pelletized carbon black and silica sand.

The Blendcon air blender is one of the fastest, most efficient blenders available for mixing large batches of dry bulk materials. It can typically blend a 300 cubic foot batch in just four minutes and can handle batches up to 200 tons in capacity. By producing large, consistent, homogeneous batches, the Blendcon air blender simplifies material handling and quality control, and increases productivity.

The Blendcon air blender / transporter lifts, turns and tumbles dry materials to a homogenous blend by utilizing the high kinetic energy released when compressed air is allowed to expand rapidly to atmospheric conditions. Compressed air (normally 15 to 30 PSIG) is injected into the material in an upward circular pattern and pulsated to obtain optimum results. There are no mixer arms or blades to wear out or get clogged with the material, which makes the Blendcon blender ideal for blending abrasive materials that would shorten the life of a conventional blender. This method of operation is so effective that it normally takes very few pulses to complete a blending cycles. The vertical blending action and smooth interior surfaces prevent buildup, so cleaning between batches is unnecessary. Combining air blending with Dynamic Air`s dense phase pneumatic conveying provides a clean, efficient system for blending and conveying most bulk granular material.

The Bella Fluidized Zone Mixer by Dynamic Air features an original design that achieves fast, high capacity, thorough, precision mixing of either dry bulk solids or liquids with solids. Regardless of particle size, shape or density, materials are mixed with a fast, efficient and gentle action. A weightless zone created by low speed counter-rotating shafts generates very low friction without shear. This makes the Bella mixer ideal for fragile products that cannot tolerate rough handling. Even flakes or spray dried bodies remain intact.