Dynapumps products

The HP Plus Pump was designed with reliability and cost reduction in mind. It is a multi-stage centrifugal pump capable of producing a full range of volumes and pressures. Each pump is individually assembled by trained personnel and fully tested to industry API standards.

The SV500 High Volume Mining pump is primarily designed to transfer up to 60m3/hour SG1.0(264USGPM) of semi viscous muds and slimes. The unit operates via a twin tank system which allows one tank to fill whilst the other discharges giving virtually constant operation. The SV500 High Volume Mining Slimes pump is completely air powered and operated which renders the unit intrinsically safe with a zone 1 approval rating. Both load and fill cycles can be adjusted via pneumatic timers to maximise product throughput.

PWA-IL ANSI B73.2 is designed, built and tested in the USA to ANSI and ISO exacting standards, while enhancing the typical design to the next level of reliability. High strength Carbon Steel liquid end and motor support material, additional casing thickness and greased lubricated bearings are just a few, no charge features considered extra from other manufacturers. Backed with fully staffed professional sales and service teams and strategically located inventory, insures consistent, rapid shipment tailored to customer specification requirements.

PWA-SP, Self- Priming process pump is uniquely designed to provide all in one pump priming and air removal without the need for priming devices such as air separator, check valve or external priming equipment. The pump is designed, built and tested in the USA to ANSI and ISO exacting standards, while enhancing the typical design to the next level of reliability. High strength carbon steel liquid end and frame adapter material, additional casing thickness and up graded bearing lubrication for increased bearing life are just a few no charge features considered extra from other manufacturers. Backed with fully staffed professional sales and service teams and strategically located inventory, insures consistent, rapid shipment tailored to customer specification requirements.

PWI-BB  - API 610 11^th Edition Vertical In-Line Single Stage Process Pump with separate bearing bracket (OH3), is designed to cover a wide range of applications found in petroleum processing facilities, gas processing, petrochemical, offshore installations (platforms), hydrocarbon and crude oil terminal and aviation (jet) fuelling applications. All pump thrust is absorbed by the pump bearings in lieu of depending on the motor bearings.

Completely portable, these pumps come in polypropylene, aluminium, stainless steel plus other material options with a wide range of elastomers to suit your requirements. These pumps are self priming and can run dry if left unattended. AOD pumps have a special air motor that does not require lubrication.

These pumps come with 2, 3, 4, or 5 cylinders to reduce pulsations. Dynapumps can supply fabricated assemblies for you complete with motor, drive arrangement and all accessories such as relief valves, pulsation dampeners, pressure gauges and instrumentation. Built for heavy duty applications in the oilfields, including our API 674 version pump, for drilling and exploration. Used in onshore plants and offshore platforms in the oil and gas industry. In the mining industry where reliability counts these pumps are used for high head underground de-watering, pressure filter feed pumps, high pressure washdowns for railways and haulage vehicles and are standard equipment on diamond drill rigs.

The Side Channel Blower principle allows oil-less and contactless compression of pumped gases, enabling a low maintenance, contaminant free pumping environment. Side Channel blowers are low in noise level alternative to PD blowers. There are many applications which require positive pressure air and suction.

Single-stage Dry & Oil Flooded Rotary Vane vacuum pumps are most commonly found in industry. They are available with either oil-sealed composite or dry carbon vanes, dependant on required application. Rotary vane vacuum pumps can be used for a wide range of industrial applications where inlet conditions are clean. Flow rates of up to 3,000 m3/h, with vacuum of 0.1 millibar are achievable from the greater Dynapumps range. Rotary vane pumps can be considered as a lower cost alternative to Dry Screw pump applications.

Heavy duty single-stage Rotary Vane Pumps are easy to install, operate fully automatically, and represent the simplest and most inexpensive system for vacuum plants. Our pumps achieve a high degree of vacuum through a wide pressure range of practically constant flow. This allows performances equal to larger size pumps, with considerable energy savings. The UV series vacuum pumps, complying with most international regulations, are valued in many industrial applications thanks to their low life cycle cost, safety, environmental compliance, low noise level, compactness, high performances, design simplicity, reliability and durability.