ECI - Environmental Coatings, Inc. products

FiberTech F-50 Penetrating Stabilizer Primer is a water-based primer with more than ten times the adhesion of other encasement primers. It has been specially engineered to penetrate, stabalize and permanently lock down a substrate and serves as the primer of the FiberTech System.

FiberTech F-51 Sealer Coat is a water-based topcoat for the FiberTech System, it was designed to form a composite system when applied over the F-50 primer . It has excellent adhesion and waterproofing properties and can stand up against ponding water on roof substrates including bituminous surfaces.

4EVERCRETE for Rebar is the premier sealing and curing product available for today`s (and tomorrow`s) concrete reinforced with rebar. 4EVERCRETE for Rebar is specially formulated to stop or virtually prevent the corrosion of imbedded steel within concrete.

IMPENECRETE chemically provides a flexible vapor-barrier coating on the surface and a water-vapor barrier in the subsurface of concrete.  The simultaneous action of these two barriers combined, quickly and easily lowers concrete`s water vapor rate emissions.  When IMENECRETE is used in conjunction with 4EVERCRETE, the concrete slab is completely waterproof and vapor-proof. IMPENECRETE also renders the treated concrete surfaces stronger, more abrasive, acid and chemical resistant, and also provides added surface bond capability for any floor system to be applied over it.  Some other benefits that IMPENECRETE provides to concrete are internal humidity stability, preserved matrix integrity, improved thermal resistance, added density, increased strengths, lowered creep deformation potential, etc.

4EVERSEAL adds hardness and strength to cement, terrazzo, and other masonry and mineral surfaces (including mortar and grout joints). Literally petrifies the area directly below the surface where applied. Penetrates into pores and increases density and durability, keeping dirt and moisture on top of the surface so that they are easily wiped away. Yet it allows vapors to exit and masonry to continue normal “breathing” action. Clear, non-yellowing, entirely without odor, easy to apply without streaking, enhancing natural beauty of stone and terrazzo. Non-flammable and non-toxic. Unaffected by repeated freeze-thaw cycles. Protects against freeze-thaw contraction and expansion so that cracking of masonry is reduced.

Mega-Flex is an elastomeric hybrid epoxy and waterproofing membrane. It is a clear, two component, low odor, 100% solids material specially engineered to stay flexible and soft, with good bridging capacity for horizontal movement of up to 1/8" without fracturing the Mega-Flex material.

Infinity Clear is a  3:1 epoxy coating system that balances working and cure time. Infinity Clear Epoxy is a clear two component thermosetting, low odor, 100% solids epoxy designed as a coating system for various conditions and substrates.

ECI-3000 is a 0-VOC high-performance hybrid polyurethane top coat. ECI-3000 is a clear two component thermosetting, low odor, 100% solids, UV-stable urethane. It has been designed to be used in areas that require maximum abrasion and wear resistance.

ECI-HDB-70 High Dielectric Barrier Coating is a high tech, state of the art, waterborne one component coating for both interior and exterior surfaces. This coating was designed using the latest technology in polymer science and formulation techniques to exhibit excellent corrosion resistance, extremely high dielectric strength, excellent exterior durability, and superior adhesion to metal, wood, cement, concrete, and plastic surfaces. With no odor, easy application, excellent electrical insulating properties, low VOCs, and water cleanup, HDB-70 is both ecologically safe and ideal for heavy duty electrical environments. Two coats are recommended.