ECOMESURE

176 products found

products

  • Samplers Gas/ Particle Products

  • ECOMESURE - Model MPS - Mini Particle Sampler

    ECOMESURE - Model MPS - Mini Particle Sampler

    The Mini Particle Sampler MPS was developed by INERIS in order to offer a portable, low-cost and simple device for particle collection and analysis. The monitoring of particles and nano-particles in particular has become a major industrial and environmental issue. A new approach consists in using a TEM (Transmission Electron Microscopy) grid as a filter to collect particles with subsequent identification and chemical analysis.

  • ECOMESURE Ecomwild - Communications System

    ECOMESURE Ecomwild - Communications System

    Ecomwild is the perfectly adapted protection for the Ecombox - a universal box able to centralize data of your measuring equipment. Thanks to a high protection against water and easy fixation you can place the Ecombox outdoors, in proximity to your instruments.

  • ECOMBOX - Model Ecomesure - Universal Communication System

    ECOMBOX - Model Ecomesure - Universal Communication System

    Ecomesure developed a new universal communications system, Ecombox. Ecombox is a universal box which can be linked to a variety of air quality measurement instruments, centralizing data on a dedicated web platform. Entirely designed and manufactured in France by Ecomesure, the Ecombox is a concentration of technologies incorporating cutting-edge innovations relating to interconnection and communication via Internet. With its web platform for accessing...

  • ECOMSMART - Ambient air quality monitoring

    ECOMSMART - Ambient air quality monitoring

    Ideal for monitoring air quality outside or in workshops, ECOMSMART measures key parameters: Air pollutant concentrations ( PM1, PM2.5, PM10, O3, NO, NO2, SO2, H2S ...), Meteorological parameters (temperature, pressure and relative humidity), GPS. Connected automatically to a web platform, ECOMSMART offers the following services in SaaS mode: data visualization, mapping of stations, air quality indicators, real-time measurements, history, downloads,...

  • ECOMZEN - Indoor air quality monitoring

    ECOMZEN - Indoor air quality monitoring

    We spend more than 80% of our time indoors but indoor air can be up to eight times more contaminated than outside air. For your Health, Safety and Environmental (EHS) projects, Ecomzen measures key indoor air quality parameters: Air pollutant concentrations (PM1, PM2,5, PM10, CO, CO2, COV, SO2, NO2, O3 ... ), meteorological parameters (temperature, pressure and relative humidity), Location (GPS) Connected automatically to a web platform, ECOMZEN offers...

  • ECOMLITE - Indoor comfort monitoring

    ECOMLITE - Indoor comfort monitoring

    Studies in the USA have shown that environmental quality is one of main concerns of occupants, tenants of buildings and employees, especially among younger generations. Noise, temperature and air quality have become essential criteria in assessing the comfort of a building and in the choice of workplace. To help you improve the quality of your building or work spaces, Ecomesure has developed a connected station which is fully-integrated for comfort...

Products by Palas GmbH

  • Palas - Nanoparticle Measurement Systems

  • Palas - Model 2050 / 2100 / 2200 - Universal Scanning Mobility Particle Sizer (U-SMPS) / Particulate Monitoring

    Palas - Model 2050 / 2100 / 2200 - Universal Scanning Mobility Particle Sizer (U-SMPS) / Particulate Monitoring

    The Palas universal scanning mobility particle sizer (U-SMPS) is available in two versions. The long classifying column (2050/2100/2200 model) is able to reliably determine particle size distributions of 8 to 1,400 nm. The Palas U-SMPS system includes a classifier [defined in ISO 15900 as a differential electrical mobility classifier (DEMC) also known as a differential mobility analyzer (DMA)], in which aerosol particles...

  • Palas - Model DEMC 1000 - Differential Electrical Mobility Classifier - Particle Size Analyzer

    Palas - Model DEMC 1000 - Differential Electrical Mobility Classifier - Particle Size Analyzer

    The Palas DEMC is available in two versions. The version with the short classifying column (1000 model) is suitable for the size range of 4 to 600 nm. The DEMC size classifier (as defined in ISO 15900) selects aerosol particles based on their electrical mobility and directs them to the outlet. The DEMC is also often referred to as a DMA. The Palas DEMC universally connects to CPCs and aerosol electrometers from other manufacturers. Several counters...

  • Filter Test Systems - Filter Media

  • Welas - Model MFP 1000 and MFP 2000 - Modular Filter Test System

    Welas - Model MFP 1000 and MFP 2000 - Modular Filter Test System

    MFP filter test rigs from Palas have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. The MFP 1000 can be used to determine: pressure loss curve on the medium without a dust coating, fraction separation efficiency, or burden and fraction separation efficiency during...

  • Welas - Model MFP 3000 - Modular Filter Test System

    Welas - Model MFP 3000 - Modular Filter Test System

    MFP filter test rigs from Palas have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. This enables you to determine the: pressure loss curve on the medium without a dust coating, fraction separation efficiency, or burden and fraction separation efficiency during application...

  • Palas - Model MFP Nano plus - Filter Test Systems with U-SMPS

    Palas - Model MFP Nano plus - Filter Test Systems with U-SMPS

    MFP filter test rigs from Palas have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP Nano plus has been specially designed for the clear determination of the separation efficiency of HEPA and ULPA filter media in accordance with DIN EN 1822-3 and ISO 29463-3. In the form of the U-SMPS, a modern and powerful nano particle measuring device with a measurement range from...

  • PALAS - Model MMTC 2000 - Test Rig For Cleanable Filter Media According to VDI 3926

    PALAS - Model MMTC 2000 - Test Rig For Cleanable Filter Media According to VDI 3926

    With the MMTC series, Palas offers a reliable and cost-effective test system for quality control and the development of cleanable filter media. The filter test rigs in the MMTC series offer high test result reproducibility. The compact and robust layout of the MMTC 2000 and its functional and simple operation have impressed our customers in industry in particular. With the aid of the MMTC series, standard filter media tests can be performed in...

  • Filter Test Systems - Complete Filters

  • PALAS - Model CIF 2000 - Standard Tests on Motor Vehicle Passenger Compartment Filters

    PALAS - Model CIF 2000 - Standard Tests on Motor Vehicle Passenger Compartment Filters

    Palas offers the CIF 2000 test rig with the welas® digital 2000 unit for standard tests on motor vehicle passenger compartment filters in accordance with DIN 71460 part 1 and ISO/TS 11155-1. The volume flow is automatically regulated and adjustable from 60 to 800 m3/h. With the aid of the CIF, both the fraction separation efficiency and the burden on the complete filters or...

  • Palas - Model HMT 1000 - Heatable Modular Test System for Oil Mist Separators

    Palas - Model HMT 1000 - Heatable Modular Test System for Oil Mist Separators

    Quality assurance and the development of filters/separators/traps should preferably be performed under test conditions that are relevant to the actual conditions encountered in practice. For this reason, oil separators must be tested at high temperatures of up to 120°C and, depending on the type of application, at high pressures.

  • PALAS - Model TVE 3000 - Vacuum Cleaner Test Rig

    PALAS - Model TVE 3000 - Vacuum Cleaner Test Rig

    TVE 3000 for vacuum cleaner tests with dust in accordance with the standard EN 60312. With the aid of the TVE 3000, vacuum cleaner tests can be carried out more cost-effectively than in accordance with the standard EN 60312. In addition, it is possible to distinguish the separation behavior of vacuum cleaners with bags and vacuum cleaners with bags and HEPA end filters reliably with salts – e.g. NaCl or KCl (TVE 3000 S) – or with dust. The...

  • Particle Generators - Aerosol Generators For Solid Particles

  • Palas - Model BEG 1000 - Low-Concentration Test Aerosol Generator

    Palas - Model BEG 1000 - Low-Concentration Test Aerosol Generator

    Generation of test aerosols from powder, dust, pollen, etc.; mass flow approx. 8 g/h to 6 kg/h. Many applications in research, development, and quality assurance require solid particle aerosols from powders and dusts. For over 20 years, the BEG 1000 has been successfully used for the reliable dispersion of non-cohesive powders, e.g. to generate test dusts, and flame soot within the size range of < 100 nm - 200 µm. The special advantage of...

  • Palas - Model AGK 2000 - Aerosol Generators for Solid Particles

    Palas - Model AGK 2000 - Aerosol Generators for Solid Particles

    Solid particle aerosols produced from suspensions, e.g. with biological agents, and solutions such as NaCl and KCl, are required for numerous applications in research, development and quality assurance. NaCl/KCl aerosols or aerosols produced from biological agents are prescribed as test aerosols in various standards to ensure comparability of filter media, measuring equipment and filters. Test aerosols, to deserve to be called such, must be...

  • Particle Generators - Aerosol Generators for Liquid Particles

  • Palas - Model MAG 3000 - Aerosol Generators For Liquid Particles

    Palas - Model MAG 3000 - Aerosol Generators For Liquid Particles

    The MAG 3000 operates based on the Sinclair-LaMer principle (1943). It comprises a core source to generate condensation cores with a particle diameter of approx. 85 nm, a vaporizer to vaporize the particle-forming material, a reheating unit, and a condensation flue, in which the particle-forming material condenses on the condensation core. The condensation process here is heterogeneous.

  • Dilution Systems

  • Palas - Model VKL 10 - Aerosol Dilution Systems

    Palas - Model VKL 10 - Aerosol Dilution Systems

    The welas VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for powders and dusts. Dilution factors of up to 1:100,000 are achieved by cascading several VKL systems.

  • Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

    Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

    The KHG 10 series of heatable dilution system builds upon the VKL series ejector principle. In addition to the advantages of the VKL series, the KHG series dilution system is configured to be heatable to 150°C (optionally up to 200°C) and is additionally pressure-resistant up to 10 bar overpressure. Isothermal and isobaric dilution can therefore be achieved. With the KHG system, both the compressed air supplied and the dilution system are...

  • Palas - Model VDD 10 - Aerosol Dilution Systems for Highly Concentrated Droplets

    Palas - Model VDD 10 - Aerosol Dilution Systems for Highly Concentrated Droplets

    The VDD series dilution system is especially used for diluting highly concentrated liquid drops. With the VDD series, the input dilution air is controlled using a mass flow controller. This mass flow controller is integrated in an external control unit and is infinitely variable. By using a mass flow controller in combination with suction from a downstream measuring device, e.g. welas digital or Promo, the dilution factor of the VDD series is...

  • 3550 - Nanoparticle Measuring Device

  • Filter Test Rigs

  • Palas - Model DFP 3000 - Compressed Air Filter Test Rig

    Palas - Model DFP 3000 - Compressed Air Filter Test Rig

    The newly developed compressed air filter test rig DFP 3000 delivers fully-automated measurements of fraction separation efficiency for compressed air filters under overpressure up to 10 bar, offering better results in the process than ISO 12500. On request we can also supply an additional filter holder for flat filter media.

  • Palas - Model XRC 049 - Defined Charge Distribution for SMPS Measurements

    Palas - Model XRC 049 - Defined Charge Distribution for SMPS Measurements

    The XRC 049 is a neutralizer on the basis of X-ray ionization. It can be used the same way as the Kr-85-370 (for example in SMPS systems), i.e. when the measurement task requires a reliable and defined charge distribution of the aerosol. The XRC 049 is especially suitable for mobile measurements performed at different locations, as there are no official requirements for the transport that need to be considered in most countries. The XRC 049 is a...

  • Palas - Model Kr-85-370 - Defined Charge Distribution for SMPS Measurements

    Palas - Model Kr-85-370 - Defined Charge Distribution for SMPS Measurements

    The Kr-85 Neutralizer is a bipolar neutralizer which generates both positive as well as negative ions through ionization with the emitted β radiation. If these ions are brought together with an aerosol, a defined equilibrium charge distribution is established, as is necessary for measuring systems, such as scanning mobility particle sizers (e.g. Palas® U-SMPS). This neutralizer is available in two versions with different...

  • Aerosol Spectrometers

  • Welas - Model digital 1000 - Light-Scattering Spectrometer System

    Welas - Model digital 1000 - Light-Scattering Spectrometer System

    The welas digital 1000 is a flexible, powerful and economical light-scattering spectrometer system, which determines particle concentration and size precisely and reliably. With the welas digital 1000, particle sizes above 120 nm can be reliably measured, as the special high power xenon high pressure lamp with very high light intensity and the photomultiplier are directly integrated in the aerosol sensor.

  • Welas - Model digital 2000 - Light-Scattering Spectrometer System

    Welas - Model digital 2000 - Light-Scattering Spectrometer System

    Aerosol spectrometer with an aerosol sensor, highest particle size resolution, measuring range from 200 nm to 40 µm. The welas digital 2000 is a flexible, powerful and economical light-scattering spectrometer system, which determines particle concentration and size precisely and reliably. The welas digital 2000 is characterized by its optical fibre technology. The welas sensor is connected via a fiber optic cable with a length up to 50 m with...

  • Welas - Model digital 3000 - Light-Scattering Spectrometer System

    Welas - Model digital 3000 - Light-Scattering Spectrometer System

    Aerosol spectrometer with two aerosol sensors, highest particle size resolution, measuring range from 200 nm to 40 µm. The welas digital 3000 is a flexible, powerful and economical light-scattering spectrometer system with two aerosol sensors, which determines particle concentration and size precisely and reliably. On the new welas digital 3000, two welas sensors are supplied with one light source and the scattered light pulses are detected by a...

Products by mlu-recordum Environmental Monitoring Solutions GmbH

  • mlu-recordum

  • Recordum Airpointer - Compact Air Quality Monitoring System

    Recordum Airpointer - Compact Air Quality Monitoring System

    The airpointer‘s modular design comprising a base unit, analyzing modules and sensor modules allows for a configuration according to different application requirements. The airpointer‘s compact design enables it to be installed almost everywhere. Due to its optimized thermal management, the airpointer consumes less power compared to conventional monitoring stations.

  • airQrate - Multi-Gas Calibrator

    airQrate - Multi-Gas Calibrator

    The airQrate multi-gas calibrator provides accurate concentrations of calibration gases such as ozone, sulphur dioxide, nitrogen oxide, nitrogen dioxide, and other gases required. The airQrate generates gases for zero and span calibration. An automatic multi-point calibration is available as well. Calibrations may be performed in transfer mode or absolute mode. The modular design enables a user-defined calibrator configuration in relation to the...

  • airQlog - 19` Ambient Air Quality Monitoring Datalogger

    airQlog - 19` Ambient Air Quality Monitoring Datalogger

    airQlog 19“ Data Logger for Saving, Managing, and Displaying Data from Various Air Quality Monitors and Sensors airQlog – Saving, Managing, and Displaying Data from Various Air Quality Monitors and Sensors. The airQlog is an innovative system to collect and control data from various air quality sensors. Its key feature is the use of all modern Internet technology for providing data. airQlog 2. The data logger is easy to configure and use...

  • Waterpointer - Automated Water Quality Monitoring System

    Waterpointer - Automated Water Quality Monitoring System

    Fresh water – one of the world‘s most valuable resources. Of the nearly 1.4 billion km³ of water covering the earth, fresh water represents merely 2.6% or 36 million km³. About one third of this amount circulates reasonably quickly and is thus referred to as hydrological cycle. This may sound like a huge quantity but compared to the 146 million m³ of water consumed annually by, for example, the population of a metropolis...

  • Airpointer - Analysis Modules

  • Airpointer - Ozone (O3) Analysis Modules

    Airpointer - Ozone (O3) Analysis Modules

    Ozone (O3) is a highly toxic corrosive substance and a common pollutant. In low concentration it is a normal component of ambient air. Highly concentrated it is an aggressive irritant gas and at ground level it affects humans and nature.

  • Airpointer - Model ADS - Additional Sensors

    Airpointer - Model ADS - Additional Sensors

    Apart from the already installed modules the airpointer offers capabilities for implementing additional sensors and external instruments using the high performance airpointer data recording. These sensors are integrated via Ethernet, RS-232 or analog interfaces. Additional sensors are mounted outside or inside the airpointer depending on the space available.

  • Airpointer - Model BTX - Analysis Modules

    Airpointer - Model BTX - Analysis Modules

    Benzene is a clear, colorless, highly flammable and volatile, liquid aromatic hydrocarbon with a gasoline-like odor. Benzene is found in ambient air as a result of burning fuels, such as coal, petrol and wood. Toluene also known as methylbenzene, is a clear, water-insoluble liquid with the typical smell of paint thinners. It is an aromatic hydrocarbon that is widely used as an industrial feedstock and as a solvent.

Products by AMA Instruments GmbH

  • Online Gas Chromatographs

  • AMA - Model GC 5000 Series - Air Quality and Industrial Site Monitoring System

    AMA - Model GC 5000 Series - Air Quality and Industrial Site Monitoring System

    The GC 5000 series of gas chromatographs have been developed for the continuous monitoring of organic compounds. The instruments are characterized by their rugged and compact design and their outstanding detection sensitivity in the low ppb to ppt range. The instruments allow for cabinet/rack mounting in AQMS, containers and mobile vans for monitoring of air pollutants in unattended operation mode.

  • Calibrators

  • 19` Gas Generators

  • AMA - Model HG 300 and HG 500 - 19″ Hydrogen Generators

    AMA - Model HG 300 and HG 500 - 19″ Hydrogen Generators

    The HG 300 and HG 500 models of 19″ hydrogen generators offer high performance and reliable operation even under harsh operating conditions. Utilizing field proven PEM cell technology, hydrogen is produced from deionized water on demand only. Thus there is no need to use high pressure gas cylinders in monitoring stations and industrial installations anymore. This saves money and results in a high level of safety.

  • AMA - Thermal Desorption Systems

    AMA - Thermal Desorption Systems

    Thermal desorption has become a well established sample introduction technique for gas chromatography in order to determine volatile or semi-volatile organic compounds in air or gaseous samples and in solids. In case of gaseous samples the organic compounds to be analyzed will be collected on suitable adsorbent materials prior to analysis, whereas solid samples can be analysed directly by means of thermal desorption.

  • AMA - Sampling Units

    AMA - Sampling Units

    AMA Instruments offers a wide range of portable and automated sampling units performing high precision air and gas sampling. The sampling units are primarily used for indoor air monitoring, occupational health and safety monitoring or observation of legally required limits in industry or environment. While sampling an exactly defined air or gas volume will be drawn through special adsorption tubes, filters or washing bottles for subsequent laboratory...

Products by GRIMM Aerosol Technik Ainring GmbH & Co. KG - a member of the Durag Group

  • Grimm - Environmental Dust Monitors

    The name GRIMM is an institution in respect of optical dust measurement solutions for official and also industrial networks. As the pioneer with the first approved system of optical environmental dust monitoring, we passed until now over 15 equivalence tests worldwide (eg. US EPA, UK MCERT, Germany LUBW, Austria UBA, etc.). From Handheld solutions for ad hoc measurements over 19” Rack-Versions for professional container solutions up to stand alone versions for container independe

  • GRIMM - Model EDM180 - Environmental Dust Monitor for Approved PM Measurements (AMS)

    GRIMM - Model EDM180 - Environmental Dust Monitor for Approved PM Measurements (AMS)

    The GRIMM EDM 180 is the leading Automated Measuring System (AMS) for measuring particulate matter concentration (PM10, PM2.5) in ambient air. This system offers outstanding features such as simultaneous PM measurements in 31 particle size channels, 0.1 μg/m3 resolution, and an isothermal inlet with an integrated Nafion dryer. The EDM 180 runs silent, requires low maintenance and can be validated on site using the field test kit together with our...

  • GRIMM - Model EDM465 - Compact Outdoor Nano System. Ultrafine particle monitoring

    GRIMM - Model EDM465 - Compact Outdoor Nano System. Ultrafine particle monitoring

    The EDM 465 combines the reliable technology of our butanol condensation particle counters with easy handling and flexible application for environmental monitoring due to a compact, robust and mobile weather housing. The EDM 465 is applicable for short and long-term continuous monitoring of ultrafine particles and enables a real-time data analysis of nanoparticles and meteorological measurement data. This configuration places the EDM 465 in the...

  • GRIMM - Model EDM665 - Environmental Wide Range Aerosol Spectrometers

    GRIMM - Model EDM665 - Environmental Wide Range Aerosol Spectrometers

    The EDM 665 Environmental Wide Range Aerosol Spectrometer combines two technologies for particle counting and classifying in one device: the Scanning Mobility Particle Sizer (SMPS+C) with the butanol condensation particle counter for nanoparticles and the approved EDM 180 for the larger fraction. Designed and specifically built for atmospheric monitoring, the EDM 665 is a unique high-tech system for accurate and highly resolved measurements over the...

  • GRIMM - Indoor Air Quality Monitors

    Dust monitoring instruments for indoor air quality have a long tradition at Grimm Aerosol. These optical laser light aerosol spectrometers monitor not only in real-time the dust concentration but also the particle size distribution in over 30 different size ranges and convert those results simultaneously to inhalable, thoracic, and alveolic fractions following the European and American regulations. Even the Nano particle size fraction is covered in a docent size ranges and can be expanded do

  • GRIMM - Model 7811 - Universal Aerosol Generator

    GRIMM - Model 7811 - Universal Aerosol Generator

    This model has two pumps inside, one for the flow through a nebulizer (generating aerosol raw concentration) and a second pump which provides dry air for optional diluting and drying of the raw aerosol (using a Silica gel dryer). Both flow rates can be controlled and switched on/off independent from each other with two switches and potentiometers on the front side of the instrument. The dryer is located at the front side and can be removed for Silica...

  • GRIMM - Model 1159-10 - Capillary Diluter

    GRIMM - Model 1159-10 - Capillary Diluter

    The 1159-10 is a diluter with a fix dilution ratio for a defined sample flow rate. It can be easily connected to any portable GRIMM aerosol spectrometer. The aerosol flow is split by a precision capillary into a sample and bypass flow. In the bypass flow all particles are removed by the built-in high-efficiency HEPA filter capsule. Downstream, both flows are mixed again. The actual dilution ratio is monitored by measuring the differential...

  • GRIMM - Model 1159-100 - Stand-alone Dilutor

    GRIMM - Model 1159-100 - Stand-alone Dilutor

    The 1159-100 is a diluter with a fix dilution ratio for a defined sample flow rate. It can be easily connected to any portable GRIMM aerosol spectrometer. The aerosol flow is split by a precision capillary into a sample and bypass flow. In the bypass flow all particles are removed by the built-in high-efficiency HEPA filter capsule. Downstream, both flows are mixed again. The actual dilution ratio is monitored by measuring the differential...

  • GRIMM - Nanoparticle Measurement

  • GRIMM - Model 5410 - Condensation Particle Counter (CPC)

    GRIMM - Model 5410 - Condensation Particle Counter (CPC)

    The GRIMM 5410 is the compact and rugged standard instrument of the Grimm CPC line with improved detection efficiency (D50 = 4nm) and response time (t10-t90 < 3 s) with an aerosol flow rate of 0.6 L/min. The new detection head enables single particle counting up to 100 000 particles /cm³ with. The photometric mode allows for the...

  • GRIMM - Model 5412 - Condensation Particle Counter (CPC)

    GRIMM - Model 5412 - Condensation Particle Counter (CPC)

    The GRIMM 5412 is the advanced compact and rugged instrument of the Grimm CPC line with integrated sample pump and an aerosol sample flow rate of 0.6 L/min. The new detection head enables single particle counting up to 100 000 particles /cm³ with improved detection efficiency (D50 = 4nm) and response time (t10-t90 < 3...

  • GRIMM - Model 5416 - Condensation Particle Counter (CPC)

    GRIMM - Model 5416 - Condensation Particle Counter (CPC)

    The GRIMM 5416 is the high-end professional all-inclusive CPC with the option to be operated as fully equipped SMPS system (see SMPS+C) with an aerosol inlet flow of 0.3 L/min. The new detection head enables single particle counting up to 150 000 particles /cm³ with improved detection efficiency...

  • GRIMM - Model 5421 - Upgradeable 19

    GRIMM - Model 5421 - Upgradeable 19

    The GRIMM 5421 is the 19' rack version of our advanced compact and rugged instrument of the Grimm CPC line with integrated sample pump and an aerosol sample flow rate of 0.3 L/min. The new detection head enables single particle counting up to 150 000 particles /cm³ with improved detection efficiency (D50 = 4nm) and response time (t10-t90 < 3 s). The photometric mode allows for the detection of high...

  • GRIMM - Model 5420 - 19` Rack-Based Condensation Particle Counter

    GRIMM - Model 5420 - 19` Rack-Based Condensation Particle Counter

    The GRIMM 5420 is the 19” rack version of our high-end professional all-inclusive CPC with the option to be operated as fully equipped SMPS system (see SMPS+C) with an aerosol inlet flow of 0.3 L/min. The new detection head enables single particle counting up to 150 000 particles /cm³ with improved detection efficiency (D50 = 4nm) and response time (t10-t90 < 3 s). The photometric mode allows for the...

  • GRIMM - Model 5520 - Annular Dielectric Barrier Discharge (aDBD) Aerosol Neutralizer

    GRIMM - Model 5520 - Annular Dielectric Barrier Discharge (aDBD) Aerosol Neutralizer

    The GRIMM 5520 aDBD aerosol neutralizer is based on an annular dielectric barrier discharge that produces a bipolar ionic atmosphere. Irregularly charged particles (from ambient or lab generated) are brought into a defined stationary-state charge distribution, regardless of their initial charging state. The aDBD was developed as alternative to established aerosol chargers / neutralizers since it avoids the need to use radioactive radiation to...

  • GRIMM - Model 5522-A - Aerosol Neutralizer

    GRIMM - Model 5522-A - Aerosol Neutralizer

    The GRIMM 5522-A aerosol neutralizer is based on the radioactive decay of Am-241 (nominal activity 3.7 MBq), that produces a bipolar ionic atmosphere by α radiation. Irregularly charged particles (from ambient or lab generated) are brought into a defined stationary-state charge distribution, regardless of their initial charging state. Aerosol neutralizers based on radioactive sources are nearly...

  • GRIMM - Model 5523-Ni - Aerosol Neutralizer

    GRIMM - Model 5523-Ni - Aerosol Neutralizer

    The GRIMM 5523-Ni aerosol neutralizer is based on the radioactive decay of Ni-63, that produces a bipolar ionic atmosphere by β- radiation. Irregularly charged particles (from ambient or lab generated) are brought into a defined stationary-state charge distribution, regardless of their initial charging state. Aerosol neutralizers based on radioactive sources are nearly maintenance free and well proven. The use and transport are however subject to...

  • GRIMM - Model 5524-X - Soft X-ray Aerosol Charger Neutralizes

    GRIMM - Model 5524-X - Soft X-ray Aerosol Charger Neutralizes

    The GRIMM 5524-X soft X-ray Aerosol Charger neutralizes the irregularly charged particles in the atmosphere or generated aerosol to a defined stationary-state charge distribution, regardless of the initial charging state of the aerosol prior entering the neutralizer. The GRIMM 5524-X is a bipolar charger that generates positive and negative ions by soft X-ray radiation instead of a radioactive source such as Americium – 241, Krypton-85 or...

  • GRIMM - Model 5520-19 aDBD - Annular Dielectric Barrier Discharge Aerosol Neutralizer

    GRIMM - Model 5520-19 aDBD - Annular Dielectric Barrier Discharge Aerosol Neutralizer

    The GRIMM 5520-19 aDBD aerosol neutralizer is based on an annular dielectric barrier discharge that produces a bipolar ionic atmosphere. Irregularly charged particles (from ambient or lab generated) are brought into a defined stationary-state charge distribution, regardless of their initial charging state. The 19” rack-mounted versions of the aDBD was developed as alternative to established aerosol chargers / neutralizers since it...

  • GRIMM - Model 5622 - Aerosol Neutralizer

    GRIMM - Model 5622 - Aerosol Neutralizer

    The GRIMM 5622 aerosol neutralizer is based on the radioactive decay of Am-241 (nominal activity 18.5 MBq), that produces a bipolar ionic atmosphere by α radiation. Irregularly charged particles (from ambient or lab generated) are brought into a defined stationary-state charge distribution, regardless of their initial charging state. Aerosol neutralizers based on radioactive sources are nearly...

  • GRIMM - Model 5416 SMPS+C - Scanning Mobility Particle Counter and Sizer

    GRIMM - Model 5416 SMPS+C - Scanning Mobility Particle Counter and Sizer

    SECURE YOUR DISCOUNT TODAY! Nano Particle Counter and Sizer. The GRIMM SMPS+C systems feature the Vienna-type DMA design (Winklmayr et al., 1991; Reischl et al., 1997), well known for highest size resolution and lowest particle diffusional losses – even for the smallest particles. The SMPS+C systems based on the GRIMM 5416 CPC are operated at an aerosol inlet flow rate of 0.3 L/min and a...

  • GRIMM - Model 5420 SMPS+C - Scanning Mobility Particle Counter and Sizer

    GRIMM - Model 5420 SMPS+C - Scanning Mobility Particle Counter and Sizer

    The GRIMM SMPS+C systems feature the Vienna-type DMA design (Winklmayr et al., 1991; Reischl et al., 1997), well known for highest size resolution and lowest particle diffusional losses – even for the smallest particles. The 19” rack-mounted versions of the SMPS+C systems, based on the GRIMM 5420 CPC, are operated at an aerosol inlet flow rate of 0.3 L/min. GRIMM offers a flexible design of the Vienna-type DMA with two electrodes of...

  • GRIMM - Model SMPS+C & 11-D - Indoor Wide Range Aerosol Spectrometer

    GRIMM - Model SMPS+C & 11-D - Indoor Wide Range Aerosol Spectrometer

    The Indoor Wide Range Aerosol Spectrometer combines two technologies for particle counting and classifying: a Scanning Mobility Particle Sizer (SMPS+C) with a butanol condensation particle counter for nanoparticles and the portable optical aerosol spectrometer (11-D) for dust particles. The system can be used for accurate and high resolution measurements of the entire particle size range from 5 nm to 35 μm in 71 particle size channels. The system...

  • GRIMM - Model 5705 & 5706 SMPS+E - Scanning Mobility Particle Sizer and Aerosol Electrometer

    GRIMM - Model 5705 & 5706 SMPS+E - Scanning Mobility Particle Sizer and Aerosol Electrometer

    The GRIMM SMPS+E systems feature the Vienna-type DMA design (Winklmayr et al., 1991; Reischl et al., 1997), well known for highest size resolution and lowest particle diffusional losses – even for the smallest particles – with a Faraday Cup Electrometer (FCE) as detector. The SMPS+E systems include the GRIMM 5706 DMA controller and the GRIMM 5705 fast and low noise FCE and can be operated at aerosol inlet flow rates of 1 - 5 L/min...

  • GRIMM - Model 5410 SKY-CPC - Condensation Particle Counter and Research Troposhperic Aerosols

    GRIMM - Model 5410 SKY-CPC - Condensation Particle Counter and Research Troposhperic Aerosols

    The GRIMM 5410 SKY-CPC is the result of GRIMMs long-lasting experience with aerospace applications with custom-made CPC-cores optimized for counting nanoparticles at low pressure. The skyCPC line features a weight-optimized design, pressure-independent flow control and a specially adapted management of working fluids to comply with aviation safety regulations. The GRIMM 5410 SKY-CPC has an improved detection efficiency (D50 = 4nm) and...

  • GRIMM - Model 7860 - Tungsten Oxide Generator

    GRIMM - Model 7860 - Tungsten Oxide Generator

    The Grimm 7860 WOx generator is a ready-to-use instrument to produce well defined aerosol particles in the size range between 1.2 – 20nm. Its principle of operation is based on the sublimation of tungsten oxide. Heated tungsten reacts in dry, clean air to several oxides and nitrates. A heating cell around a WOx coil provides a temperature of approximately 900°C – the sublimation temperature of WO3. Tungsten oxide...

  • GRIMM - Model 5430 and 5431 - High Accuracy Stationary Particle Counter

    GRIMM - Model 5430 and 5431 - High Accuracy Stationary Particle Counter

    The GRIMM 5430 is a high accuracy stationary particle counter for automotive emission measurements with improved response time (t10-t90 < 3 s) and an aerosol flow rate of 0.6 L/min. The instrument complies to the GPRE particle measurement program (PMP) for Euro 5 and 6 regulation 83. The new detection head enables single particle counting up to 50 000 particles /cm³ with a coincidence correction

  • GRIMM - Model 7917 - Emission Sampling System (ESS)

    GRIMM - Model 7917 - Emission Sampling System (ESS)

    The GRIMM 7917 Emission Sampling System (ESS) is designed to sample aerosol particles directly from hot exhaust gas, e.g. from fireplaces, combustion processes or engine exhausts. The sampling probe (Ø 8 mm) can be directly connected to stacks and features a two-stage dilution system with integrated filter, dryer and activated charcoal absorber. The dilution air of the first dilution stage is preheated, dried and free of particles and organic...

  • GRIMM - Model 5561 - Electrostatic Precipitator

    GRIMM - Model 5561 - Electrostatic Precipitator

    The GRIMM 5561 electrostatic precipitator is a sampler for aerosols over a wide size range from 0.8 – 1100 nm. The particles can be collected for off-line analysis on different substrates that are suitable for a variety of common analytical tools like transmission electron microscopes (TEM), scanning electron microscopes (SEM) or atomic force microscopes (AFM). For sampling well defined size fractions, all GRIMM DMAs are designed to be combined...

  • Mercury Vapor & H2S Vapor Analyzers

  • GRIMM Jerome - Model J505 - Mercury Vapor Analyzer

    GRIMM Jerome - Model J505 - Mercury Vapor Analyzer

    The Jerome J505 Mercury Vapor Analyzer is a portable fluorescence spectroscopy analyzer, which allows the detection cell to be simpler, smaller, lighter weight and more durable than competing spectroscopy instruments. The highly efficient optical cell requires less flow to purge the system, allowing the J505 to run at a lower flow rate minimizing sample dilution as found in competing spectroscopy instruments.

  • GRIMM Jerome - Model J405 - Mercury Vapor Analyzer

    GRIMM Jerome - Model J405 - Mercury Vapor Analyzer

    The Jerome J405 portable mercury vapor monitor is redefining the portable mercury vapor analyzer market. Significant performance enhancements and modern communications capabilities have been combined to create a new option for mercury spill detection and clean-up analysis. The J405 utilizes the industry-proven, inherently stable and reliable gold film sensor technology and simple, one-button operation. The ergonomically-designed handle, lighter...

  • GRIMM Jerome - Model J605 - Hydrogen Sulfide Analyzers

    GRIMM Jerome - Model J605 - Hydrogen Sulfide Analyzers

    The newest H2S analyzer from Arizona Instrument LLC is the Jerome® J605 Hydrogen Sulfide Analyzer. The Jerome® J605 can read as low as 3ppb with an incredible resolution of 20ppt. The J605 is housed in a light and ergonomically designed case, setting a new precedent for low-level, portable monitors. The industry-proven, gold film sensor has been upgraded and improved from previous models, resulting in longer life expectancies. 

  • GRIMM Jerome - Model 631-X - Hydrogen Sulfide Analyzer

    GRIMM Jerome - Model 631-X - Hydrogen Sulfide Analyzer

    The portable Jerome® 631-X Hydrogen Sulfide Analyzer displays low-level concentrations in just seconds. It offers an analysis range of 0.003-50 ppm for odor and corrosion control, safety, and leak detection in such industries as wastewater treatment, oil and gas, pulp and paper, and farming. This simple-to-use instrument utilizes an internal rechargeable battery pack or AC power, and is easily carried to suspected sources of hydrogen...

Products by Eigenbrodt GmbH & Co. KG

  • Precipitation Collectors and Analyzer

  • Eigenbrodt - Model BUS 100 - Bulk Sample Precipitation Collector

    Eigenbrodt - Model BUS 100 - Bulk Sample Precipitation Collector

    A new kind of precipitation collector designed as a routine able bulk-collector to obtain samples for analysis of mercury traces. Funnel‑ and sample bottle heating enables year round operation. Cooling down to a temperature of 5 °C prevents the loss of volatile sample components. The borosilicate glass funnel helps  prevent droplets adhering to the funnel and is pH neutral. irect material, funnel shape and the collection surface...

  • Eigenbrodt - Model BUS 125 - Bulk Precipitation Sampler

    Eigenbrodt - Model BUS 125 - Bulk Precipitation Sampler

    Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At...

  • Eigenbrodt - Collection Funnels and Filters

    Eigenbrodt - Collection Funnels and Filters

    Collection of precipitation for analyzing organic components as well a mercury in the precipitation, the choice of the best fitting contact material like sample funnels is very important. In these cases PTFE and DURAN-glass, in some cases also stainless steel are preferable to HD-polyethylene. Collecting precipitation for acidifying components HD-PE is seen as the appropriate contact material to the sample. Eigenbrodt has developed a complete series...

  • Eigenbrodt - Dry Sample Container Unit (DSC)

    Eigenbrodt - Dry Sample Container Unit (DSC)

    For certain research project it is not only interesting to sample the wet only deposition, but also the dry only deposition at the same place during periods of no precipitation. The DSC-unit allows this type of samples. It maintains open during periods of no rain, and will be closed with the coverlid during rainy periods automatically. The DSC-unit can be ordered heated and unheated. As material for the sample container HD-PE or DURAN-glass can be...

  • Eigenbrodt - Duran Configurations

    Eigenbrodt - Duran Configurations

    Collection of precipitation for analysing organic components as well a mercury in the precipitation, the choice of the best fitting contact material like sample bottles and funnels is very important. In this cases PTFE and DURAN-glass are preferable to HD-polyethylene. For all types of instruments funnels and sample bottles are available in DURAN-glass. The separating system components for type “D”, “T” and “S” are...

  • Eigenbrodt - Model HD-PE Configurations - Collecting Anorganic Content

    Eigenbrodt - Model HD-PE Configurations - Collecting Anorganic Content

    Collection of precipitation for analysing inorganic components like acidifying components in the precipitation, the choice of the best fitting contact material like sample bottles and funnels is very important. In these cases HD-PE and silicone are preferable. For all types of instruments funnels and sample bottles are available in HD-polyethelene. The separating system components for type “D”, “T” and “S” are made...

  • Eigenbrodt - High (Snow) Top

    Eigenbrodt - High (Snow) Top

    Housings with snow top have a better aerodynamic profile and influences therewith the rain collection rate. The (high) snow top configuration can be (optional) constantly heated and therefore avoids that snow can be built up on the housing. This option is useful especially in areas with lots of snow fall.

  • Eigenbrodt - Model NMO 191 - Acid Rain Analyser (Monitor) for Inline Measurements

    Eigenbrodt - Model NMO 191 - Acid Rain Analyser (Monitor) for Inline Measurements

    Continuous measurements of pH and conductivity yield instantaneous values for the amount of dissolved trace substances as well as the acidity. The synchronous measurement of the two parameters allows quality control of the results and a good estimate of the amount of free acid in the precipitation. Acidity and amounts of trace substances obtained by precipitation correspond closely to the temporal development of the precipitation event. Therefore the...

  • Eigenbrodt - Model NSA171 - Climatised Precipitation Mercury Sampler

    Eigenbrodt - Model NSA171 - Climatised Precipitation Mercury Sampler

    The precipitation sampler is used for the purpose of collecting the precipitation into a large single sample bottle. The individual sample bottle can be easily removed from the apparatus at the end of the period of measurement for laboratory analysis. Every single component which is used for measurement is made out of chemically neutral material and placed in a thermally insulated housing. At high temperatures the housing is cooled automatically...

  • Eigenbrodt - Model NSA 181 - Basic - Sampler for Inorganic Content

    Eigenbrodt - Model NSA 181 - Basic - Sampler for Inorganic Content

    recipitation contains a high amount of organic, inorganic and suspended substances. It is believed to be the major atmospheric purification process and has a high contribution to the trace element cycle in the atmosphere. The PRECIPITATION SAMPLER NSA 181 is equipped with a cover lid for a wet only application. This lid is opened only during deposition. So now it is possible to catch the wet precipitation only. This characteristic is in contrast to...

  • Eigenbrodt - Model NSA181K - Sampler for All Campaigns for Precipitation

    Eigenbrodt - Model NSA181K - Sampler for All Campaigns for Precipitation

    The precipitation sampler is used for the purpose of collecting the precipitation, depending of its configuration, in a large sample bottle, in 8 separate day or single samples or weekly samples. The individual sample bottle can be easily removed from the apparatus at the end of the period of measurement for laboratory analysis. Every single component which is used for measurement is made out of chemically neutral material and placed in a thermically...

  • Eigenbrodt - Temperature Monitoring of Sample Room

    Eigenbrodt - Temperature Monitoring of Sample Room

    The temperature sensor is installed into the sample room as shown left hand side. The data is directly available as analogue PT100 signal. In combination with the EIGENBRODT signal PCBs, the temperature data of the sample room can be accessed as 4-20mA signal or as serial signal, depending on version of the PCB. Alternatively also a internal temperature logging unit with sensor for sample room and also a sensor for ambient temperature can be built in....

  • Eigenbrodt - SD-Card Data Logger

    Eigenbrodt - SD-Card Data Logger

    The all new SD-card data logger allows in combination with Eigenbrodt signal PCBs to log the data sets on SD-memory cards. This allows retrieving the data simply by replacing the SD-card. The unit is easy to operate: Just to push in the SD-card and the logging file is automatically been created. All data from this point of time will be written to the SD-card. In case the file already exists, the new data will be added at the end of the file. The file...

  • Eigenbrodt - Highlight Stands for Collectors and Sensors

    Eigenbrodt - Highlight Stands for Collectors and Sensors

    The robust stand for Precipitation Sampler and – Analyser allows a secure assembly and fixing to the ground. It is made out of steel, hot dip galvanised for outdoor use. The total height, stand base and instrument, will be between 1.5 m up to 1.8 m following the WMO recommendations. Customized stand bases for other collecting heights are available on request. The precipitation sensor can be also mounted on a stand base of its own. (hot dip...

  • Eigenbrodt - Tipping Bucket (Inline)

    Eigenbrodt - Tipping Bucket (Inline)

    The precipitation collectors NSA 181/NSA 181K and UNS 130 can optionally be equipped with a tipping bucket system. For Eigenbrodt Precipitation Monitors NMO 191 the tipping bucket is standard. This functionality provides digital pulses of the precipitation amount being collected with through the collection funnel. In combination with the EIGENBRODT signal PCB Memory (optional), now it is possible to log rainfall amount and also the intensity. Note for...

  • Metrology

  • Eigenbrodt - Model ODM470 - Optical Disdrometer

    Eigenbrodt - Model ODM470 - Optical Disdrometer

    Precipitation measurement over the global oceans onboard moving ships is a notoriously difficult task. Gauge based systems are prone to large undercatch errors due to fluctuating high wind speeds and flow distortion. While the errors are large for rainfall, the estimation of snowfall and mixed-phase precipitation is impossible. In addition to the precipitation accumulation, precise information about the particle size distributions for rain and snow...

  • Eigenbrodt - Model ONED 250 (OFS) - Optical Fog Sensors

    Eigenbrodt - Model ONED 250 (OFS) - Optical Fog Sensors

    ONES 250 (OFS) is a sensor for visibility with a good cost-performance ration with a main application in traffic purposes. Using so called backscatter technique it measures the amount of water particles i.e. fog in the air that limit the visibility. The design allows the operation in various locations and applications. The validity and the stability has been - so far - resulting in satisfied customers.

  • Eigenbrodt - Model SRM 450 - Ship Rain Gauge

    Eigenbrodt - Model SRM 450 - Ship Rain Gauge

    The ship rain gauge is designed to measure rain fall on moving ships or buoys. The high relative flow velocities on a cruising vessel may carry the rain almost horizontally over the ship. By measuring the amount of water that is collected by a vertical surface, a correction for the wind effect is possible. Evidently the local relative wind speed at the monitoring site of the instrument is to be measured simultaneously. Rain is collected at the...