ECT2, a Montrose Environmental Group products

ECT2 has ready-to-run Pilot PS Series for rapid deployment and implementation around the world. These can be installed anywhere, which includes integration into other systems, allowing the technology to be demonstrated to stakeholders.

ECT2’s SORBIX™ L Series is designed for projects requiring flow rates of 35 GPM or less. For optimum performance, two vessels should be installed in a lead/lag configuration.

ECT2’s SORBIX H Series is designed for applications requiring flow rates of up to 1,357 GPM per vessel, such as drinking water systems. Additional vessel trains can be added to achieve any required flow rate.

The SORBIX M Series systems are housed in single shipping containers, designed to meet the demands of rapid installation and start-up. Systems include pre-treatment, as required, are configured for SORBIX PURE or SORBIX RePURE resins, and come in 50, 100, 200, and 200+ GPM (3, 6, 12 and 12+ L/sec) models.

LC (Low Concentrations) Model Designed to treat low concentrations (

Foam Fractionation is most used in applications with high concentrations of PFAS and co-contaminants. Foam Fractionation Treatment using FOAM-X™ is the technology that ECT2 applies to these highly contaminated waters, such as groundwater remediation, wastewater treatment, and landfill leachate management.

Granular Activated Carbon (GAC) technology has become a popular choice for drinking water applications due to its effectiveness in treating water with low levels of contamination. This technology has proven to be highly effective in meeting less stringent effluent standards, making it a reliable solution for ensuring the safety and quality of drinking water. Its use has been widely adopted by various industries and organizations that prioritize the provision of safe and clean drinking water with Carbon Adsorption Services.

Commonly used in drinking water and groundwater remediation applications, ECT2’s single-use resin, SORBIX PURE, can effectively remove difficult PFAS analytes to meet stringent effluent goals.

Regenerable ion exchange (IEX) resin is commonly used in high PFAS concentration applications, including groundwater remediation, wastewater, and landfill leachate.  ECT2’s regenerable resin, SORBIX RePURE, is a patented technology, enabled by a proprietary specialty regenerant solution, that allows PFAS-saturated resin to be regenerated onsite and reused. Following regeneration, the solution is processed through ECT2’s distillation and SuperLoading™ process, which reduces waste generation by orders of magnitude.