Edwin Elliot & Co., Inc.

12 products found

products

  • Ambassador  - Steam Surface Condensers

    Ambassador - Steam Surface Condensers

    Ambassador Heat Transfer Company specializes in manufacturing Steam Surface Condensers for steam turbine exhaust. Each Surface Condenser is engineered to offer optimum performance for the turbine application.

  • GA Industries - Model Figure 922  - High Capacity Compound Lever Air Release Valve

    GA Industries - Model Figure 922 - High Capacity Compound Lever Air Release Valve

    The Figure 922 has a larger venting orifice than the Figure 920 and therefore can efficiently release air from higher flow rate systems. The Figure 922 is available with 2” or 3” (DN50 or DN80) NPT connection size, cast iron body and 316 SS trim and can be supplied with one of two large standard orifices - a 3/8” (4.8mm) diameter for pressures up to 150 PSI (1,034 Kpa) or a 7/32” (5.6mm) diameter for up to 300 PSI (2,068 Kpa)...

Products by Fontaine-Aquanox Water Control Gates

  • Series S - Standard Stock Slide Gates

  • Model S11-P - Open Frame Gate

    Model S11-P - Open Frame Gate

    Open Frame Gate with a rising stem design and pedestal mounted actuator. The most common configuration encountered when above ground (or floor) installation of the operating mechanism is practicable. Operating forces of the gate are transmitted to the structure (floor). Pedestal mounting brackets are available for open top situations.

  • Model S22-F - Self-Contained Frame Gate

    Model S22-F - Self-Contained Frame Gate

    Self-Contained Frame Gate with a non-rising stem design and an actuator in a floor box. The most common configuration encountered when above ground (or floor) installation of the operating mechanism is not possible (streets, pathways). The self contained frame ensures that none of the operating forces of the gate are transmitted to the surrounding structure.

  • Model S22-P - Self-Contained Frame Gate

    Model S22-P - Self-Contained Frame Gate

    Self-Contained Frame Gate with a non-rising stem design and pedestal mounted actuator. This configuration is useful in situations where a pedestal mounted actuator is desired, but the ceiling clearance is limited and does not provide space for rising stem, or when transmitting the operating forces to the surrounding structures must be avoided.

  • Model S22-Y - Self-Contained Frame Gate

    Model S22-Y - Self-Contained Frame Gate

    Self-Contained Frame Gate with a non-rising stem design and actuator directly mounted on the top section of the frame (yoke). This configuration is useful in situations where very limited installation height is desired and the overall vertical dimension must be reduced. The overall outside height (H) of the gate is fixed for each size to allow for full opening.

  • Fabricated Sluice/Slide Gates

  • Model 20 Series - Stainless Steel Slide Gate

    Model 20 Series - Stainless Steel Slide Gate

    Fontaine-Aquanox’s SERIES 20 Sluice Gate is a highly versatile flow control gate with various types of mountings. Adaptable to different applications, the SERIES 20 can be designed to the required seating and unseating heads. The seal design keeps the allowable leakage rate to 0.04 U.S. gpm per foot (0.50 l/min per...

  • Model 25 Series - Stainless Steel Channel Gate

    Model 25 Series - Stainless Steel Channel Gate

    The Fontaine-Aquanox SERIES 25 gate is designed to control water flows in channels. It is the same construction as the Series 20 with the exception that it is not equipped with a top seal. The maximum allowable leakage is 0.04 US GPM per foot (0.5 l/min per meter) of the perimeter in seating and unseating head conditions (head conditions taken is equal to the height of the...

  • Fontaine-Aquanox - Model Series 40 - Weir Gate

    Fontaine-Aquanox - Model Series 40 - Weir Gate

    The Fontaine-Aquanox SERIES 40 weir gate is used to control flows and level in different applications by opening downwards and allowing water flow over the stainless steel plate. The SERIES 40 sealing system design is similar to that of the SERIES 20.

  • Stop Logs and Stop Plates

  • Model 92 Series - Stop Plate

    Model 92 Series - Stop Plate

    The Fontaine-Aquanox SERIES 92 gate is designed to control and/or isolate water flows in channels. Its unique sealing system enables the gate to seal in both directions. The maximum allowable leakage rate is 0.1 U.S. gpm per foot of perimeter (1.25 l/min per meter) in seating and unseating head conditions (head conditions taken as the height of the slide).

  • Bulkhead Gate

  • Model 23  Series - Stainless Steel Bulkhead Gate

    Model 23 Series - Stainless Steel Bulkhead Gate

     Bulkhead Gates SERIES 23 is used to shut off water flow in structures to enable maintenance or repairs on other equipment or for emergency purposes (Figure 23-01). They are also used to divert a flow of water in different areas of a plant. Bulkheads are also referred to as Stop Shutters or Intake Gates and can be stacked one over the other like Stop Logs to limit the weight of the...