Eltek Limited
- Home
- Companies
- Eltek Limited
- Products
Refine by
Families
- Air Quality / CO2 - GenII Transmitters for Air Quality Monitoring
- Air Velocity - GenII Transmitters for Air Velocity Measurement
- Air Velocity - GenII Transmitters for Air Velocity Measurement - Sensors
- Differential Pressure - GenII Transmitters for Differential Pressure
- Digital State - GenII Transmitters for Monitoring Digital State
- Electricity Usage - Electricity Supply Load Balancing - Sensors
- Flood - GenII Transmitters for Flood Detection
- Heat Flux - GenII Transmitters for Heat Flux Measurement
- Incubator - GenII Transmitters for Incubator Monitoring
- Incubator - GenII Transmitters for Incubator Monitoring - Sensors
- Light + UV - GenII Transmitters for Light Measurement
- Light + UV - Light Sensors
- Mini Squirrel Dataloggers
- People Counting - GenII Transmitters for People Counting
- Pulse Counting - GenII Transmitters for Pulse Count Sensors
- GenII Receivers and Dataloggers
- Solar Radiance - GenII Transmitters for Measuring Solar Radiance
- Temperature - Using Probes - GenII Transmitters for Industrial Temperature Monitoring
- Temperature and Humidity (Ambient) - GenII Transmitters for Environmental Monitoring - Built in Temperature and RH
- Temperature and Humidity (Ambient) - GenII Transmitters for Environmental Monitoring - Outdoor Temperature and RH
2 products found
Eltek Limited products
People Counting - GenII Transmitters for People Counting
GenII - Model GC62 - Transmitters for People Counting
The GenII people counter system consists of the self powered GC62 transmitter to which the pulse output from a Velleman PEM7D can be connected. The PEM7D is a compact AC mains powered device that emits a continuous infrared beam. The sender and receiver are contained in a single compact enclosure that produces a pulse if the reflected beam is interrupted. The GC62 has two counter inputs.
Vellemen - Model PEM7D - Sensor for People Counting
The PEM7D is supplied with adjustment bracket, reflector, AC100/250 to 9VDC fixing hardware and setting up instructions. The PEM7D is suppled with a captive 9m lead. The lead could be extended if required. The range is given as 7m.