Environmental Protection Engineering S.A. - EPE S.A. products
Marine Equipment - Waste Water Treatment
Poseidon - Bilge Oil Water Separator
POSEIDON EC Bilge Oil Water Separator consists of two stages; the coalescer and the electrolytic emulsion breaking unit. The coalescer works on a continuous mode, by-passing the second stage. If the detection monitor senses content higher than 4ppm at the effluent of the coalescer oil, then the emulsion breaking unit begins its operation. This unit is equipped with a specially designed electrolytic cell which operates on the principle of electrocoagulation, producing coagulating agents on demand for the effective emulsion breaking. Thus an effluent with an oil concentration of 5ppm or less is ensured, according to the existing Environmental Class Notations.
Poseidon - Bilge Oil Water Separator
POSEIDON FIT Bilge Oil Water Separator consists of two stages; the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode, by passing the second stage, and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 4ppm, then the emulsion breaking unit begins its operation. Due to an effective hydrocarbon absorption material the effluent of 5ppm or less, is ensured, according to the new Environmental Class Notations. In that way, the operation and maintenance cost is minimized and the life of the equipment is prolonged.
Poseidon - 14ppm Bilge Oil Water Separator
POSEIDON EVO unit contains two stages, the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 14ppm, the emulsion breaking unit begins its operation. The unit contains an effective hydrocarbon absorption material which ensures an excellent effluent quality with oil content much lower than the IMO requirements.
Ballast Water Treatment
Erma First - Ballast Water Treatment System
ERMA FIRST BWTS FIT is an advanced modular developed to exceed all special installation requirements. Covering an extensive capacity range of 50-3740 m3/hr, the system is suitable for newbuilds as well as for retrofits of all types and sizes of vessels. The major components of the system are an automatic back-flushing filter and an electrolytic cell of outstanding performance under the most demanding conditions. Using an active substance produced by the method of electrolysis, the re-growth of microorganisms is eliminated.
Antipollution
Skimmer/ Transfer Pumps
Our company can provide an extensive range of skimmer/ transfer pumps and power-packs for any application. Latest technology and vast experience is incorporated in the range enabling the recovery of a great variety of oil products from light diesel oil to high viscosity products. oil spill products.