70 Articles found
Environmental Technology Publications Limited Articles
-
Guide to the requirements of ISO 14001:2015
Many people new to management systems are under the impression that an ISO standard is a set of rules that dictates how an organisation should go about its business. That is not correct. An ISO standard is the document which contains a set of ...
-
UK chemical company selects Sievers* InnovOx TOC Analyser to ensure regulatory compliance and wastewater treatment plant performance - Case Study
SUEZ Water Technologies & Solutions designs and manufactures Sievers Total Organic Carbon (TOC) Analysers that enable near real-time reporting of organic carbon levels. Offering a variety of laboratory, on-line and portable analysers that cover ...
-
Sample collection and analysis of carbonyls - Improve detection of trace level contaminants in air
Improve Sampling and Detection of Carbonyls in Air Leverage a Wide Range of Samplers and Accessories Achieve sensitive and reliable results with air sampling media for a wide range of applications in various configurations for solvent desorption, ...
-
Reagents and standards for salts in water
The methods for assessing the levels of salts in Water are described in the Official Methods of Analysis of AOAC International, 19TH Edition 2012 Volume 1. Reagecon as one of the largest producers of Physical and Chemical Standards and Certified ...
-
Gas analysis implications of the new non-road mobile machinery (NRMM) regulation
On September 2014 the European Commission proposed a new regulation to harmonise across the EU the emissions limit values (ELV’s) from engines installed in Non-Road Mobile Machinery (NRMM). This new regulation replaces a number of national ...
-
2006-2016: 10 years of continuous dioxins monitoring in Italy. Which assessment for which perspective?
2006-2016: 10 years of continuous dioxins monitoring in Italy. Which assessment for which perspective? Polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF), more commonly named dioxins and furans are odorless, highly ...
-
The importance of monitoring PCDD/F in the stack-gas emissions from the combustion of certain types of solid biofuels
The increasing use of indigenous renewable energy sources (RES) for energy aims to meet the targets set up by the European Union (EU) regarding energy and climate change policies. Thus, biomass combustion has become more and more attractive. In ...
-
Emissions monitoring on ships and an insight into the maritime directive
Shipping continues to grow for the purposes of trade and transportation. This growth is often close to densely populated shores, for example the port of Antwerp in Belgium, Hamburg in Germany and the Bosphorus in Turkey. Air emissions from the ...
-
Monte-Carlo model of a gas analyser operating under EN 14181:2014 to investigate achievable uncertainty during emission monitoring
Monitoring of emissions is controlled by the Industrial Emissions Directive (IED), which sets out the requirements for emitters to meet. There are standards in place that, when followed, allow the operators to meet the IED requirements. One of ...
-
Flue gas flow rate measurement for verifying continuous monitoring at power stations according to EN ISO 16911
The relatively new European standard for measuring fl ue gas fl ow rate, EN ISO 16011 Parts 1 and 2, specifi es Quality Assurance requirements for continuous flow monitoring at, for example, large combustion and incineration plant. When the flue ...
-
Certification of automated measuring systems - New regulations and new opportunities
The type approval and certifi cation of automated measuring systems is since several years an important topic for the manufacturers of automated measuring systems. In the UK and Germany national certifi cation systems and minimum requirements for ...
-
How can industrial regulations be improved to avoid any potential emissions reporting scandal (Avoiding a VW type scandal)
The VW automotive emissions testing scandal has signifi cant environmental implications due to the mismatch between expected and actual emissions of NOX . Many consider that the ultimate responsibility lies with VW on the issue, however it is ...
-
Carbon Trading in the European Union: `Calculation` vs `Measurement`
This paper describes the main provisions for Monitoring and Reporting under the European Union’s Emission Trading System (EU ETS). For the largest installations, the ‘Calculation’ approach is based on the measured fuel consumption, ...
-
Reagents and standards for the pulp and paper industry
Reagecon are pleased to announce the launch a series of new Industry Specific Catalogues. One such catalogue details has been created for laboratories performing analysis for the Paper and Pulp sectors. Enclosed in a single catalogue find all ...
-
Reagents and standards as per standard methods for the examination of water and wastewater 21st Edition 2005, APHA AWWA WEF
As one of the largest producers of Physical and Chemical Standards and Certified Reference Materials worldwide, Reagecon recognise that the growth in our range and the use of such standards requires an innovative approach to the presentation of our ...
-
Continuous measurement of mercury emissions in combustion plants (Overview and new measuring method)
Introduction Continuous measuring devices have been used for continuous recording of Hg emissions in waste incineration plants since the early Nineties. Operators of combustion plants must maintain a 24-hour measured value of 30 ...
-
Measurement of PM emissions and electrostatic precipitator charging efficiency from coal combustion
Summary / Abstract Electrostatic precipitator particle removal efficiency is governed by the level of charge that the particles gain in the ESP. The ELPI+™ measures real-time (10 Hz) particle size distribution and concentration in ...
-
Particulate CEMs for wet and dry FGD applications
Introduction This paper overviews the challenges of monitoring particulate in wet and dry stack conditions found after wet and dry FGD arrestment plant fitted to coal fired power plant. It describes the techniques used for monitoring ...
-
Long-term sampling - A method for continuous emission monitoring of dioxins/furans and mercury
Introduction The continuous emission monitoring of the different compounds which are emitted by industrial facilities is an important topic to approve the compliance to different regulations like WID. However, there are several compounds ...
-
New operating mode for on-line analysis of dioxin emission from stationary sources
Dioxins and furans are produced by an incomplete combustion of organic and chlorinated compounds Generated by stationary sources such as waste incinerators, cement/metal working industry… Dispersal in the environment ...