Epcon Industrial Systems, LP articles
Epcon is proud to share its case study for the Tank Truck Loading Terminal.
The Problem
Loading and Unloading Tank Trucks:
When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere.
The Process
Generally speaking, with the loading and unloading of truck terminals there are multiple loading and unloa
Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO`s) for the Coffee Roasting Industry.
The Problem
A leader in the Coffee Industry needed equipment to control odor and eliminate VOC`s from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. In the past they had used a Catalytic Oxidizer which easily became clogged with pa
The Problem
A major Vapor & Odor Control company needed a portable solution to clean the soil leftover at old fuel stations.
The Process
Soil Remediation Afterburners & Oxidizers are manufactured to treat soil containing contaminates such as petroleum hydrocarbons, with diesel oil, gasoline, aromatic hydrocarbons, solvents and many other volatile organic compounds (VOC). These systems are designed with a large turn down rat
Coffee Roasting Company
Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry.
The Problem
A leader in the Coffee Industry needed equipment to control odor and eliminate VOC`s from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. In the past they had used a Catalytic Oxidiz
Midstream Company
Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO`s) for the Midstream Industry.
The Problem
A leading Midstream company needed equipment to achieve higher DRE and treat the H2S (sour gas) from their process. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. In the past they had used a Flare wh
Epcon is an industry leader with extensive experience in the Coil Coating Industry.
You can rely on us to understand your process and to choose the system most appropriate for your application. Our experience leads to effective solutions for the Coil Coating industry.
With countless installations of industrial ovens & thermal oxidizers to meet specific needs and a long history within the Coil Coating industry we have the necessary experience to handle any job.
Epcon has extensive experience in designing and building Industrial Conveyor Ovens for the Welding Consumables Industry.
The Problem
The company produces welding rods that must be dried to a certain specification before the process is complete.
The Process
The welding rods must travel through 3 zones at certain temperatures and meet the requirement for low moisture content to continue through the manufacturing proce
RTO technology has been developed for large volumes and low VOC concentration air pollution applications. The best example is spray booth exhaust where the volume of exhaust is high and VOC concentration is very low. Regenerative Thermal Oxidizer technology is based on using ceramic media as heat exchangers and switching values.
Advantages
- High thermal efficiency
- Very low operating cost
- Extremely rugged
- No metal, no issu
The Problem
A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had waited a long time and had no solutions to comply with the mandate.
Three Canister RTO for Tank Car Loading and Unloading Terminal
Epcon is proud to share its case study for the Tank Truck Loading Terminal.
The Problem
Loading and Unloading Tank Trucks:
When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere.
The Process
Generally speaking, with the loa