Eska Valve Ltd. Sti. products

ESKA ERG-H1 direct acting gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure. H1 series is suitable for commercial usage  like Gas Skids where max inlet pressure up to 20bar and outlet pressure up to 4bar. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

ESKA ERG-H5 direct acting gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure. H5 series is suitable for commercial usage  like Gas Skids where max inlet pressure up to 20bar and outlet pressure up to 2,5 bar. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

ESKA ERG-SX Series double stage gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure. It is suitable for both commercial and domestic use where it can be directly and easily installed to gas meters with high operational reliability and outlet pressure accuracy. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

ESKA ERG-SE Series double stage gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure. It is suitable for both commercial and domestic use where it can be directly and easily installed to gas meters with high operational reliability and outlet pressure accuracy. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

ESKA ERG series gas pressure regulators are used in the gas lines in order to reduce maximum 0,5 bar input pressure to the desired output pressure between 16 and 150 mbar. The range of the output pressure can be set with choice of a different springs. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

ESKA ERG-E series gas pressure regulators are used in the gas lines in order to reduce maximum 0,5 bar input pressure to the desired output pressure between 16 and 150 mbar. The range of the output pressure can be set with the choice of  different springs. The regulator with safety SHUT-OFF gets automatically active and stops the gas flow in case output pressure gets higher or lower than the adjusted value in order to ensure the safety of the devices used in the system. The relief valve system is also available. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

ESKA EGF Series gas filters separate dust particles carried by the gas or very small particles spread within the gas (for example: dust and rust). EGF filters hold those  particles and protect burner, gas counter and other adjustment devices from damage. Dust, woodchips, smut and other physical substances and dirt in the gas are held by the fiber. EGF filters are resistant against the mechanical and thermal stress that occur under operational conditions. When the dust tank capacity is exceeded or in very high pressure difference, the filter loses its protection function. The device must be kept away from rain and water as much as possible.

ESKA EGF-H seeries gas filters separate dust particles carried by the gas or very small particles spread within the gas (for example: dust and rust). EGF-H filters hold those  particles and protect burner, gas counter and other adjustment devices from damage. Dust, woodchips, smut and other physical substances and dirt in the gas are held by the fiber. EGF-H filters are resistant against the mechanical and thermal stress that occur under operational conditions. When the dust tank capacity is exceeded or in very high pressure difference, the filter loses its protection function. The device must be kept away from rain and water as much as possible.

ESKA EGV series ,manually adjusted gas valves, are used for  safety purposes in the gas lines to automatically stop the gas flow by the effect of the signals given by the third party equipments such as gas alarm detectors, ventilation devices etc.

ESKA EMV Series Earthquake Valve is a shut-off valve which is activated during seismic oscillation. Activation and non-activation waves are defined in TS 12884 Turkish Standard. This Turkish standard was created based on ANSI Z11 standard in United States. Once mechanical actuation system senses the seismic oscillation, valve shuts the gas off and you should rearm manually in order to reactivate gas flow. This valve basicaly is a manual reset, normally open gas valve. Main aim is  to decrease the risk of gas leakage related fire, when earthquake occurs. In countries this safety system is available, main regulation is done by fire safety department.