Essegi Meccanica Di Saro Gulotta S.A.S. products

Completely hermetic dumping container with two pivoting wheels and two fixed wheels so it can be easily moved with no special devices. The dumping container is a multipurpose product, suitable for several type of production plants: machine shops, joiner shops, paper mills, The dumping container can be equipped upon request with special double bottom and tap for collecting and recovery of liquids. The operator has to use the forklift truck to empty the dumping container. The operator removes the safety pin simply pulling a rope from the driving seat, to dump and empty the container.

The mesh container is suitable for the firms where solid but light and large waste are produced and collected: firms producing cardboard box, expandable materials and very large waste and scraps. The sides of the container are entirely made in carbon-steel mesh, with no openings. The product is treated with atmospheric-proof powder or liquid paint so it can be placed outside the working area. The mesh container can be easily and safely moved with transpallet or fork lift truck. To be used in reduced rooms and for an easy stocking, the mesh containers can be stacked one upon one another. The material contained in the mesh container has to be removed manually.

Carbon steel electro-welded container, the ideal solution for easily collecting rubbish, waste and scraps close to the working areas. The structure has an hermetic basin and it is easy to move thanks to its four wheels. The dumping container can be easily moved with a fork-lift truck. The forklift truck driver can empty the dumping container directly from its driving seat, simply moving the locking/unlocking pin: this prevents the operator from any accident.

The fixed container for revolving plate has been designed and built to be used with forklift truck with dumping tools or revolving plates.
This is the right blend of versatility, easiness of use and suitability. The container is made of electro welded carbon steel, with hermetic basin, so it can collect both solid and liquid waste. The operator has to insert the forks of the fork lift truck in the openings of the base, lift the container over the main collecting container and start the revolving device of the truck. The container will automatically empty. Rotate and replace it in position to use it again.

The container with openable bottom is designed to be placed inside the factory.  This product can be used in several factory plants, for example machine shops, joiner shops, paper mills,...  This is a good solution for collecting and recycling waste materials. The bottom of the container is not hermetic so it can not be used where liquids waste and/or solid waste soaked in liquids are produced.  The container can be equipped with upper openings or special hooks suitable to move and lift the container with a forklift truck. The operator has to use a forklift truck to remove the material inside the container. The operator lift the container over the collecting container and then can easily open the bottom simply pulling the opening lever with a rope remaining in the driving seat.

"ETERNAL" line: container with openable bottom designed for soundness and durability. The product can be used in several applications, it is particularly suitable for recycling and differential collection of waste. The ETERNAL container is suitable to be used inside the buildings of the factory, it has a nonhermetic bottom so it is a perfect solution for those firms where are not produced liquid waste material or waste material filled with oil, solvents or similar substances. The container can be realized with openings or special hooks for inserting the forks for lifting. A fork lift truck must be used for removing the waste material from the container. The container has to be lifted with the fork lift truck , then the operator can discharge the waste material pulling the operating lever using a rope when resting on the driving place.

Fixed container for outside, suitable for recycling and differentiated collection of waste material. Carbon steel electro-welded structure made in large thickness sheet metal and tubular profiles . It is the ideal solution for collecting materials in narrow spaces and/or when it is not possible to use other type of containers. The container has high-resistance special inner hooks or outer rings for lifting. The container has internal hooks or outer lifting points for positioning and moving the container. The container can be provided with a front door (RH or LH side), made of only one (single door) or two movable parts (double door). All the containers with single door have a safety lock to avoid unsafe closing of the door. To unload the container there can be used mechanical arms and/or crab tools.

Fixed container for outside, suitable for recycling and differentiated collection of waste material. The figures below refer to models with top cover to protect scraps from weather: the inner part of the container remains totally dry if the cover is applied. The first two pictures refer to the cover moved by hydraulic cylinder. The cover is made of carbon steel and is opened by manual acting of the cylinder. A discharge valve slow down the hydraulic pressure at the end of the stroke to ensure smooth closing of the container. The central pictures refer to a PVC-made cover moved by a roller and a rotating handle. The last figures refer to the manual cover. This cover is made in thin sheet metal and can be applied only with container of suitable dimensions and height (so that the operator can easily move the cover by the handles). Any of the covers can be used safely and with no risk for the operator.

Multi-purpose totally hermetic skip handler. The use and transportation of the skip handler is performed by special skip-truck. Its particular design is perfect for chemical mud, flake of plaster, organic waste. It can be also called "ecologic shuttle", due to its versatility. The dragging structure consists of 4 special hooks placed on two opposite sides. The material is discharged using the hooks in the rear side. Different types of dragging structures can be realized so that the skip handler can be used with any kind of vehicle and truck.

Storage container for temporary stock of cylinders and compressed gas cans. The container is made in assembled robust carbon steel-made parts. The product has also a continuous ground system (Faraday cage). The front part for material entry/exit, consists of two sliding doors made in safety carbon steel net. The net allow also a natural and simple circulation of air inside the container, avoiding potentially dangerous gas accumulation. The two sliding doors have a safety locking system to prevent unauthorized personnel to have access to the container.  The product belongs to deposit/storage box category so it is not necessary any authorization toinstall and use it, even if it is anchored to the soil. The container in the figure can store about 50 cylinders; it can be made in different dimensions (larger/smaller) under request.