EURO-P Kleindienst GmbH products
EURO-P - Model RW3 - High-Performance Submersible Mixer
The RW3 is a high-performance submersible mixer with IP68 motor protection, designed for full immersion in slurry, liquid manure, wastewater, and biogas substrates. With motor power ranging from 7.5 kW to 30 kW, it delivers robust mixing capabilities at low speed thanks to a precision gear system (planetary or spur gearbox). Its dual mechanical sealing and oil-filled chamber ensure exceptional reliability, while integrated seal and temperature sensors offer advanced condition monitoring. A stainless-steel sliding mounting system is available for secure attachment to 100 × 100 mm square tubing—ideal for slalom or meander system installations. The propeller is optimized to balance flow velocity, circulation, and energy efficiency, making RW3 a durable and efficient mixing solution for challenging environments.Motor Pumps
EURO-P - Model ER3-E DF - Centrifugal Slurry pump
The ER3-E DF is a mobile slurry pump on a tricycle frame, offering easy mobility, fast switching between mixing and pumping, and reliable performance in demanding conditions. Its robust design, 320° adjustable mixing nozzle, and wear-resistant impeller ensure high efficiency, durability, and maximum flexibility in slurry management.
EURO-P - Model ER3-E HD - High Pressure Centrifugal Slurry Pump
The ER3-E HD is a high-pressure, air-cooled, electric centrifugal slurry pump engineered for robust and stationary use in pits and tanks. This versatile unit doubles as both a cutting-mixing pump and a stirring pump, switching between modes via a slide gate. Equipped with a 270° horizontally swivelable and 60° vertically adjustable mixing nozzle, it effectively disrupts sediment and floating layers for seamless homogenization before pumping. The reinforced cast-iron housing and specialized steel impeller with intake screw and carbide cutting edges ensure high durability, superior throughput, and longevity in abrasive or fibrous media. Available in base lengths suitable for pit depths up to 1.65 m, also extendable in 25 cm increments, with options for enhanced pressure via strengthened intake design and bearing arrangement.PTO Pumps
EURO-P - Model ER2-S - Centrifugal Slurry Pump
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm.
EURO-P - Model ER4-S - Centrifugal Slurry Pump
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to homogenise the slurry before pumping by stirring up floating or sinking layers.
EURO-P - Model ER2-S - Centrifugal Slurry Pump with Underfloor Discharge
The EURO-P ER2 is a robust vertical centrifugal slurry pump, available with either an electric motor (ER2-E) or tractor PTO drive (ER2-S). Designed for stationary installation in slurry pits and tanks, it enables seamless switching between pumping and mixing via a slide gate. The 270° rotary and 60° vertical adjustable mixing nozzle efficiently homogenizes slurry by flushing sediment or disrupting floating layers before pumping. Thanks to its underfloor discharge, the pump can be uncoupled from above without entering the pit, vastly improving safety and convenience. The cast-iron housing, hardened steel impeller with intake screw, and carbide edges ensure superior durability and performance under abrasive and fibrous conditions. Available extensions in 25 cm increments accommodate pit depths starting from 1.25 m.Hydraulic Motor Pumps
EURO-P - Model ER4-H - Sludge and Slurry Pump
The ER4-H is a powerful hydraulic motor-driven slurry and sludge pump designed for mobile operation in pits, lagoons, and tanks. Thanks to its compact and robust construction, it is highly versatile and ideal for heavy-duty agricultural and industrial use. Equipped with a special steel impeller featuring an intake screw and hardened cutting edges, the ER4-H delivers reliable pumping performance even with abrasive or fibrous media. An optional hydraulically adjustable mixing nozzle allows operators to pre-mix and homogenize the medium, breaking up sediments or floating layers for consistent suction and maximum efficiency. The reinforced housing and efficient hydraulic drive make the ER4-H especially durable, ensuring long service life under demanding operating conditions. Designed for easy mobility, it is a practical solution whenever flexibility and performance are required.Submersible Pumps
EURO-P - Model ER4-T - Submersible Pump (Top or Bottom Entry)
ER4-type submersible pump. Motor protection class IP68. Available with electric motors from 7.5kW up to 22kW power. Equipped with a large oil reservoir, double sealed (2 x mechanical seal). The ER4-T is designed according to industrial specifications with the inlet at the bottom side of the pump, whereas the ER4-T O is the submersible pump model with top-down suction.All ER4-type submersible pumps include sensors for leakage control as well as temperature probes. Connection and usage of the leakage sensor and the temperature probe is possible with special starters for submersible pumps (see page 47). Warranty is only effective when used in combination with these special starters.The basic unit is the bare pump. Equipment for 4 different layouts is available (according to the type of application).
EURO-P - Model EP1-T - Submersible Pump – Robust & Efficient
The EP1-T is a corrosion-resistant, stainless-steel submersible pump engineered for reliable performance in demanding environments. It handles wastewater, greywater, silage leachates, and fiber-rich liquids. Key benefits: full stainless-steel construction, long-lasting IP68-rated motor, and versatile installation options. Available with motor powers from 0.55 kW to 2.20 kW, and both 230 V (up to 1.10 kW) or 400 V configurations, optimized for maximum flexibility.Slurry Separator
EURO-P - Model Separator 1000/600 - Compact and Rugged Solid-Liquid Separator
The Euro-P separator (slurry separator) meets even the highest requirements, manufactured in full stainless steel design with high durability of all parts in contact with the slurry.The sophisticated rugged design allows for applications in demanding and challenging operating conditions at industrial and agricultural sites.The compact device `Type 400 Separator` was especially designed for uses at small-scale applications compared to the bigger type 600 and type 1000 machines.