Fab-Seal Industrial Liners Inc services

Clean sizable area around spot to be patched using alcohol or acetone. (Can be found at your local hardware store.) Alcohol may be used, particularly if humidity it high. Cut a circular patch somewhat larger that the hole to be repaired. If you use a square patch, make sure you round the corners about a half inch. Wipe both patch and area to be patched thoroughly with rag dampened with acetone or alcohol. Lay the patch on the cleaned, marked area. Place the roller on an edge of the patch, centered, patch edge up and over the roller and hold with your thumb or finger.

Fab-Seal Industrial offers more than just Liners. We offer a Cleaning service as well. We will clean water tanks no matter the size. Hard water, sludge, grime, we will get it done. And if the need were to arise for a Liner, we can do that to.

Fab-Seal floor coverings are pre-fabricated in our factory into one piece units or sections of units to be installed on location using field seaming techniques. Our floor coverings are attached mechanically around the perimeter using batten strips and anchors. This procedure prevents 75% of the normal preparation time needed for applied coatings and has no harmful chemicals. Unlike applied coatings our mechanically held floor coverings are independent of the surface. This means that cracking or movement will not breach the integrity of the flexible liner. Please feel free to call for additional information. Our technical advisors will gladly answer any questions you may have and can also give you a quotation on materials and installation costs.

For over three decades, Fab-Seal Industrial Liners, Inc., has been an industry leader in the manufacture, fabrication, and installation of flexible PVC (Poly Vinyl Chloride) membrane lining systems for a wide range of tank liner industrial uses. Fab-Seal’s team of experienced installers will instruct you on our installation procedures and techniques, or offer complete installation service by our Confined Space trained installation crews using our OSHA approved equipment.

A member of our staff will contact you for specifications about your tank and services required.