Fiberlock Technologies, Inc.

17 products found

Fiberlock Technologies, Inc. Products

  • Asbestos Abatement

  • ABC - Multipurpose Asbestos Encapsulation System

    ABC - Multipurpose Asbestos Encapsulation System

    ABC is an important tool for coping with the health hazards associated with exposure to asbestos fibers. ABC Asbestos Binding Compound is a high solids asbestos encapsulant/sealant, designed to encapsulate friable Asbestos Containing Material (ACM) such as fireproofing and insulation material.

  • Lead Abatement

  • Fiberlock - Model LBC Type III - Lead Barrier Compound

    Fiberlock - Model LBC Type III - Lead Barrier Compound

    LBC (Lead Barrier Compound) forms a barrier between lead-based paint and the environment to offer unparalleled coverage, economics and aesthetics while preserving historic and architectural detail. In independent testing, LBD met and surpassed the ASTM E-1795 standard for lead-based paint encapsulants for both indoor and outdoor use. Available in white (5800) and antique linen (5801).

  • LeadSafe - Lead Dust Cleaner

    LeadSafe - Lead Dust Cleaner

    The last and possibly most critical step in any lead abatement job is clean-up. With LeadSafe Lead Dust Cleaner this process can be easier than ever. LeadSafe cleaner utilizes chelating agents similar to those given to individuals with lead poisoning.

  • Fiberlock ChildGuard - Model 5600-1-C4 - Interior/Exterior Lead Encapsulant Coating - 1 Gal (4/Case)

    Fiberlock ChildGuard - Model 5600-1-C4 - Interior/Exterior Lead Encapsulant Coating - 1 Gal (4/Case)

    Available in convenient one-gallon cans, ChildGuard forms a barrier between lead based paint and the environment, serving as a safe and effective alternative to the costly process of lead-based paint removal. If a structure was built prior to 1980, there is a distinct possibility that it contains lead based paint (LBP). ChildGuard is accepted in all 50 states as a permanent abatement method, and meets or exceeds all federal, state and local standards...

  • Mobile Containment

  • Kontrol Kube TopSider - Model 6544-U - Mobile Dust Containment

    Kontrol Kube TopSider - Model 6544-U - Mobile Dust Containment

    The Kontrol Kube TopSider is ideal when overhead containment is needed for maintenance or repairs, such as cabling, light bulb replacement, HVAC access or any other above-ceiling work. The TopSider can also be used for wall access when performing plumbing work or installing power and communications outlets. With a 30″ wide wheel base, the unit can be quickly moved through all AIA and NFPA compliant doors to any area where dust and particulate...

  • Kontrol Kube - HEPA Filtered Negative Air Machine

    Kontrol Kube - HEPA Filtered Negative Air Machine

    The Kontrol Kube Complete Negative Air Machine combines power & flexibility to form the perfect solution for HEPA filtered negative pressure. The Complete Negative Air Machine can be used as a negative pressure generator for the Kontrol Kube or by itself as a portable air scrubber.

  • Mold Products - Disinfectants & Sanitizers

  • Fiberlock ShockWave - Model 8310-1-C4 - Disinfectant/Sanitizer (CONC) 1 Gal (4/Case)

    Fiberlock ShockWave - Model 8310-1-C4 - Disinfectant/Sanitizer (CONC) 1 Gal (4/Case)

    Shockwave is an EPA-registered disinfectant, sanitizer and cleaner designed for use on various surfaces subject to microbial contamination, ideal for flooding and mold remediation.  ShockWave is especially useful as an all-in-one product for treating wood framing, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project.

  • Fiberlock ShockWave - Model RTU 8316-1-C4 - Disinfectant/Sanitizer

    Fiberlock ShockWave - Model RTU 8316-1-C4 - Disinfectant/Sanitizer

    Our convenient, ready-to-use formulation is perfect for situations when a clean water source is not available. ShockWave RTU is designed for use on various surfaces subject to microbial contamination, ideal for flooding and mold remediation. It is especially useful as an all-in-one product for treating wood framing, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project.

  • Fiberlock ShockWave - Model H202 8318-1-C4 - Hydrogen Peroxide Disinfectant

    Fiberlock ShockWave - Model H202 8318-1-C4 - Hydrogen Peroxide Disinfectant

    Our EPA Category IV disinfectant, cleaner and odor neutralizer is effective in all restoration and remediation applications. Designed for general cleaning and disinfecting of hard, non-porous environmental surfaces, it cleans quickly by removing dirt, grime, mold, mildew and other common soils found in hospitals, nursing homes, schools and colleges, medical, dental offices and life science laboratories.

  • Mold Products - Cleaners and Stain Removers

  • Fiberlock HydroBoost - Model 8313-Q-C12 - Cleaners and Stain Removers

    Fiberlock HydroBoost - Model 8313-Q-C12 - Cleaners and Stain Removers

    Ideal for situations that demand extreme cleaning and powerful stain removal, HydroBoost additive instantly increases the oxidation potential of Advanced Peroxide Cleaners. When added to Advanced Peroxide Cleaner, HydroBoost will further: Lift and remove deeply embedded dirt and debris. Remove tough stains caused by mold and mildew. Reduce labor.

  • Fiberlock - Model 8315-5 IAQ 1000 - Hydrogen Peroxide Stain Remover

    Fiberlock - Model 8315-5 IAQ 1000 - Hydrogen Peroxide Stain Remover

    Our ready-to-use, hydrogen peroxide-based mold stain remover is suitable for use on water damage restoration projects to remove stains from mold and mildew. IAQ 1000 is pH-neutral and contains an agent that will whiten and brighten stained surfaces, without the harmful bleach ingredients.

  • Mold Products - Fungicidal & Mold Resistant Coatings

  • Fiberlock - Model 8360-5 IAQ 6000 - Mold Resistant Coating - 5 Gal - White

    Fiberlock - Model 8360-5 IAQ 6000 - Mold Resistant Coating - 5 Gal - White

    IAQ 6000 is a white, tintable mold resistant coating*, that contains a fungistatic agent to resist mold growth on the dry coating surface. IAQ 6000 is a durable, flexible, and permeable 100% acrylic water based coating. IAQ 6000 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal.

  • Fiberlock - Model 8361-5 IAQ 6100 - Mold Resistant Coating - 5 gal pail - Clear

    Fiberlock - Model 8361-5 IAQ 6100 - Mold Resistant Coating - 5 gal pail - Clear

    AQ 6100 is a clear mold resistant* coating for professional use, that contains a fungistatic agent to resist mold growth on the dry coating surface. IAQ 6100 is a durable, flexible, and permeable 100% acrylic water-based coating.  IAQ 6100 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal, and galvanized metal.

  • Fiberlock - Model 8362-5 IAQ 6000HD - Heavy Duty Mold Resistant Coating - White, 5 Gal

    Fiberlock - Model 8362-5 IAQ 6000HD - Heavy Duty Mold Resistant Coating - White, 5 Gal

    Ideal for use during new building construction, IAQ 6000HD is designed with durability and flexibility to resist mold growth on the dry coating surface. Use it on non-porous and semi-porous building materials, including gypsum wallboard, oriented-strand board (OSB), wood framing timbers, plywood, masonry block and many other structural surfaces where a flexible, high-build, mold resistant coating is necessary.

  • Asbestos Decontamination Showers

  • Fiberlock AfterShock - Model 6439-U - Klean-Pop Collapsible Decontamination Shower

    Fiberlock AfterShock - Model 6439-U - Klean-Pop Collapsible Decontamination Shower

    Klean-Pop Shower answers the growing need for a quality, mobile decontamination shower that is inexpensive, durable and easy-to-use. The Klean-Pop shower offers the easy mobility and compact appearance of a suitcase on wheels. One person can move Klean-Pop wherever it needs to be and set up the shower in as little as two minutes.