FloodBarrierStore products

Aluminum Flood Stop Log System Reusable Flood Protection Barrier for Garage Doors, Patios, Basements & Commercial Entrances. Eudore Series II Aluminum Flood Barrier – Upgraded design for garages and doorways. Dual rubber seals provide two-way waterproof protection, with adjustable height for different flood levels. Ideal for doorways, basements, garages, ramps, loading docks, and commercial entrances.

Eudore Series II Flood Barrier Specially improved for garage and various doors. The two-way sealing design of double rubber strips allows the baffle to adjust the height according to the actual flood conditions. Electrophoretic coating for 10+ years of corrosion resistance. No Recycled Aluminium · Built with 100% New 6063-T5 Aluminium, 2.5× Heavier. Automotive-grade EPDM sealing, made from 100% pure EPDM with no fillers or recycled impurities.

Flood Protection Performance: Designed to prevent water ingress at entrances exposed to flooding. The modular stop-log system creates a tight seal against rising water, making it suitable for both residential and commercial flood defense. Waterproof Sealing System: Equipped with double EPDM rubber seals on side channels and horizontal boards. Water pressure enhances sealing performance, reducing leakage at joints and edges during heavy flooding.

Reusable Aluminum Flood Barrier - Garage & Home Waterproof Flood Gate 126–181″ Height – Custom Width, Silver Gray. Flood barriers,also called flood shields and flood panels, which protect different kinds of openings from damage caused by flood water inundation. Flood barriers are installed easily and quickly.Made of triple-thick aluminum heights up to 181in.

Reusable Aluminum Flood Barrier - Waterproof Stop Log Flood Gate 71–118″ Custom Size – Champagne Finish. Flood barriers,also called flood shields and flood panels, which protect different kinds of openings from damage caused by flood water inundation. Flood barriers are installed easily and quickly. Constructed from double thickness aluminum, heights up to 118 in.

Reusable Aluminum Flood Barrier | Waterproof Stop Log Flood Gate 71–118″ Custom Size – Silver Gray. Flood barriers,also called flood shields and flood panels, which protect different kinds of openings from damage caused by flood water inundation. Flood barriers are installed easily and quickly.Constructed from double thickness aluminum, heights up to 118in.

Use a hammer drill to drill holes through the pre-drilled guide hole in the post and into the wall or frame to which is will be mounted. The expansion bolts provided are M12 bolt size (0.472″), so we recommend using a 12mm drill bit for hole drilling.

Tension bottom plank down so its fully compressed to ensure a seamless seal across the ground and bottom plank. Before installing each plank, check that the rubber seals are intact. When installing each plank into the posts, secure the tension plate and bolts to pressure planks down to create a tight seal. Use the top tensioning plate to pressure planks downward, enhancing the seal between them.

We supply expansion bolts with every order and if you decide to use the included bolts, you will need an 12mm drill bit to drill the hole for the expansion bolt. Insert the masonry expansion sleeve and mounting bolts into newly drilled receiver holes and tighten down the bolts using a ratchet to secure in place.

Visually examine the caulking around the mounting posts: Check caulk / seal between the posts and wall.