Fluid-O-Matic products

Application :- This machine connects cells through the partition of container.

Application :- This machine seals Lid to Container. For every size of container you require Separate sealing fixture.

Application :- This machine checks air leakage in One cell of the battery in one go. Leakage of Cells can be watched on respective Pressure Gauges which is provided.

Application :- This machine checks pin hole, separator missing and splash of lead in cells, etc. It also checks that all the cells are connected to each other with the help of high voltage. If there is any fault then it gives visual indication as well as audio alarm.

Operator need not to change punches daily. Operator has to press a push button, which initiates pneumatic cylinder for a set period so hot punches are pressed at set temp. For the set period with a set force to mark the exact depth on battery cover. This machine is more accurate. Every Battery manufactured will have distinguished Mark on it. It can be alphabetically or numerically or Combination of both. Number of Punches can be Six/Eight/Ten or as per requirement of individual Manufacturer.

This machine has a automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are below this. Cutting height can be set by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery in machine for cutting. During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Normally Cutting is set at sealing line of lid. Max. of Automotive Batteries have approximately same height, say +-10 mm. Remaining Battery will come out of machine on Conveyor.

This machine has a automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are below this. This machine has two Blades for Cutting. Cutting heights of both the blades can be set at independent height by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery into machine for cutting. First cutting is set normally at sealing line of lid and Second cutting is set below strap. During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Max. of Automotive Batteries have approximately same height, say +-10 mm.

This machine has a automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are less than this. This machine has three Blades for Cutting. Cutting heights of all the three blades can be set at independent heights by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery into machine for cutting. First Cutting is set above lid so any battery which has more height than normal automotive batteries like Standby Batteries i.e. IT-500, Jumbo etc. will be cut and that portion ejects out from first window. Second cutting is set normally at sealing line of automotive battery lid and third cutting is set below strap.