ForeverPure Corporation products

ForeverPure Seawater Reverse Osmosis Systems are fully manufactured and tested in the Silicon Valley, California, USA. Only the highest quality components are used in our products. Combining decades of water treatment equipment manufacturing experience and numerous installations around the world, ForeverPure is able to offer top-of-the-line systems with the best value on the market.

One metering injection system will be supplied for controlling different elements in the feed water of the RO plant. The metering pump will allow controlling of different functions such as the stroke length and percentage rate. The Chlorine Dosing System adds chlorine to feed water source, protecting the system from bio-fouling.

System only consumes < 3.8KWH/M3 of water desalinated (RO only, excluding feed water pump and product water distribution pump power consumption).

ForeverPure Seawater RO systems are designed to operate under high or low TDS conditions. The built-in Variable Frequency Drive (VFD) can be adjusted to increase or lower the operation pressure according to feed water TDS. The VFD feature coupled with an unique direct pressure exchange system that recovers mechanical energy from the waste brine stream greatly improves the system efficiency and lowers electrical consumption. In today’s high energy cost world, these are essential features to have in a seawater desalination plant.

ForeverPure Seawater RO systems are designed to operate under high or low TDS conditions. The built-in Variable Frequency Drive (VFD) can be adjusted to increase or lower the operation pressure according to feed water TDS. The VFD feature coupled with Energy Recovery System greatly improves the system efficiency and lowers electrical consumption. In today’s high energy cost world, these are essential features to have in a seawater desalination plant. Electrical power consumption is exceptionally low at less than 1.9KWH/M3/day for 25 degrees Celsius and < 36,000 ppm seawater . SWRO power consumption, excluding feed water pump and distribution pump power consumption.

System only consumes < 2.0KWH/M3 of water desalinated (RO only, excluding feed water pump and product water distribution pump power consumption).

One metering injection system will be supplied for controlling different elements in the feed water of the RO plant. The metering pump will allow controlling of different functions such as the stroke length and percentage rate. The Chlorine Dosing System adds chlorine to feed water source, protecting the system from bio-fouling.

One metering injection system will be supplied for controlling different elements in the feed water of the RO plant. The metering pump will allow controlling of different functions such as the stroke length and percentage rate. The Chlorine Dosing System adds chlorine to feed water source, protecting the system from bio-fouling.

ForeverPure Seawater water reverse osmosis systems are fully manufactured and tested in the Silicon Valley, California, USA. Only the highest quality components are used in our products. These components include FILMTEC membranes, Allen Bradley or Siemens PLC, Siemens/ABB contactors, Danfoss or FEDCO Pumps, and etc.. Combining decades of water treatment equipment manufacturing experience and thousands of installations around the world, ForeverPure® is able to offer products with the best value on the market.

ForeverPure Seawater water reverse osmosis systems are fully manufactured and tested in the Silicon Valley, California, USA. Only the highest quality components are used in our products. These components include FILMTEC membranes, Allen Bradley or Siemens PLC, Siemens/ABB contactors, Danfoss or FEDCO Pumps, and etc.. Combining decades of water treatment equipment manufacturing experience and thousands of installations around the world, ForeverPure® is able to offer products with the best value on the market.