Gecam Srl products

Manual brushing machine for different metal surface working processes, depending on the type of brush that is mounted. Adjustable conveyor belt feed speed to ensure necessary finishing result. Variable brush speed also available on request. Machine user frendly that allows a clear reduction of costs compared to traditional automatic sanders. Brush group in unique structure  with manual handwheel for positioning the heads on the work surface. The heads are open on the operator side to allow to process pieces wider than the conveyor belt. Suitable to be equipped with any type of cylindrical brush.

Brushing machine born for cleaning, polishing or satin finishing operations on pieces of any type and material. The column base is designed to give the smallest footprint both when standing and sitting, it can be filled with sand or other heavy material to ensure stability in any working condition.

The double brush machine was created for cleaning, polishing or satin finishing operations on pieces of any type and material. The column base is designed to give the smallest obstruction both when standing and sitting, it can be filled with sand or other heavy material to ensure stability in any working condition.

The machine was created for deburring edges on linear cut pieces of shears, punching machines with micro junctions, plasma, lasers, and performs the two chamfers on both sides of the piece in one pass, ensuring a significant reduction in processing times. It consists of a cabinet base, which can hold spare abrasive belts and any accessories and is equipped with four swivel wheels, two of which with brakes. Variable speed conveyor belt unit, which can be tilted up to 30 ° to facilitate the insertion and alignment of the pieces during automatic processing. The speed of the conveyor belt can be read on a display directly in meters / minute and can be varied by acting on the appropriate potentiometer

Variable angle bevelling machine Quicker for chamfers at 45° on sheet metal. Chamfer angle variation from 15° to 50°. Compact and user friendly machine, with fully hardened cutter that allows to chamfer thicknesses up to 30 mm. Direct reading scale for each thickness and special guide for a simple introduction of the material. It does not require any maintenance.

Deburring machine with two work groups defined with mobile bench with electronic adjustment from touch screen. Equipped with an abrasive belt unit suitable for removing large burrs from plasma and oxyfuel processing, with a system that allows you to detach them by working only the edges of the piece. Variable speed feed unit with ultra-heat and oil resistant natural rubber conveyor belt.

Deburring machine with single abrasive belt working group with mobile bench with adjustment lever with fine control +/- 0.1 and digital thickness display. Advance group with self-centering rubber belt with rubberised pressure rollers before and after the work group and idle roller at the input and output.

Wet dust filtering system equipped with soundproofed fan, tank with float, front panel with plexiglass cover for inspection of the starting spray. Simple and safe vacuum operation that guarantees constant results over time. The sucked air passes through a vertical labyrinth to immerse itself several times in the water contained in the tank located below, generating some vortices and nebulizations that force the suspended particles to precipitate before reaching the fan impeller and then reaching the exhaust pipe. The water in the tank is kept at a constant level by a float in a tank connected directly to the water system. The electrical system is located inside a watertight metal box.

Complete range of self-cleaning compressed air cartridge filters made of steel, CE marked and certified. Designed to meet different filtration needs, attractive design, simple to install and with limited energy consumption, allows an output dust concentration of less than 5 mg / Nm3s.