Gielle Industries products

Whether you operate a chemical plant, a paint shop, or a storage facility, you need to be prepared for the possibility of a fire breaking out and causing severe damage to your property, equipment, and inventory. You also need to protect your employees and customers from the risk of injury or death caused by fire.

Spark fire suppression systems are designed to detect and eliminate ignition sources before they reach dust explosion prone areas, such as filters, silos, and hoppers. They use advanced spark detection technology and rapid water mist extinguishing to prevent fires and explosions in pneumatic dust collection and air filtration systems.

Fire detection systems from Gielle provide unbeatable accuracy and ease of use for building, personnel, installers, and firefighters. At the first sign of danger, our reliable fire detection systems trigger a coordinated alarm, people are led out of the danger area via voice messages, and extinguishing systems are activated.

Water Mist is a versatile and highly efficient fire-fighting medium. What differentiates Water Mist from traditional water based systems is its reduced droplet size. When a droplet of water vaporises, it expands by some 1,600 times. Because heat absorption is a function of surface area and not volume, smaller droplets mean more surface area and therefore faster heat absorption.

Automatic fire sprinkler systems are widely regarded as the most effective method of controlling fires caused by a broad range of hazards. Sprinkler fire systems work by using a water supply system that provides adequate pressure and flow rate to a water distribution piping system, to which sprinkler heads are connected. The sprinkler heads are installed in ceilings or side walls, and are designed to operate individually when exposed to heat.

Deluge fire suppression systems use an open distribution pipe network, typically connected to a number of valves allowing for the relevant suppression agent to be released in specific areas. These systems are suitable for high-hazard areas where fire may spread rapidly or where water damage is not a concern.

The search for halon 1301 replacements has been on-going for over 10 years and each alternative brings with it a unique set of properties. We have brought to the market products that match the requirements of industry and our latest research allows us to introduce fire protection systems using 3M™ Novec™ 1230 fluid , a new development with some advantages over current technologies. 3M Novec 1230 fluid allows us to complement our existing range of agents as the phase out of halons accelerates in many countries around the world.

FM 200 is a clean agent fire suppressant that works by removing the heat from the fire triangle (oxygen, heat, and fuel). It is a colorless, odorless, and electrically non-conductive gas that leaves no residue to clean up. It is safe for use in occupied spaces and for the ozone layer.

Foam extinguishing systems use foam monitors, sprinklers or nozzles to create large-scale foam blankets that cover the burning material, put out the fire and prevent it from re-igniting. Foam extinguishing systems are ideal for protecting high-risk areas, such as those with flammable liquids or plastics. The foam can be adjusted from low to very high expansion, depending on the type of risk, to achieve the best extinguishing effect.

Gielle specializes in the design, installation and maintenance of ANSUL R-102 fire protection systems. Whether it is a neighborhood café, a rotisserie, a diner, a fast food, a restaurant or a large food court in a shopping mall, ANSUL R-102 fire protection systems are the most reliable solution for the safety of the kitchen and those who work there every day.