Go Geothermal Ltd.
5 products found

Go Geothermal Ltd. products

Air Source Ancillaries - System Strainer

Go Geothermal - Magnetic System Filter for Air Source Heating

Many untreated or improperly treated heating systems suffer from an accumulation of debris, collectively referred to as sludge deposits. Made up of corrosion products, water hardness flakes and installation or maintenance debris, this sludge can cause premature equipment failure or block/restrict system flow – directly reducing system life, efficiency and effectiveness.

Go Geothermal - Air Eliminators

Air – in other words Oxygen – once present in a heating system, can cause blocks in radiators and pipe work due to the forming of large air pockets. The presence of oxygen can also cause corrosion of system components.

Ancillaries

Go Geothermal MultiFill - Combination Valve

LK 521 MultiFill® is a combination valve for easy filling of refrigerant fluid into ground source heat systems.  The valve has a filter to protect the evaporator against possible grit. Its compact construction allows it to be installed in tight spaces.  The valve comes with an insulation to protect against condensation and possible icing.  LK 521 MultiFill® can also be used in other applications where filling and filtration are required. Arrows on the valve body indicate the direction of the flow. The enclosed insulation should be used. Apart from cleaning the filter no maintenance is required. The filter should be cleaned immediately after installation, a month later and then every other year or when refilling fluid to the system. Check the installation regularly.

Go Geothermal - Electrolytic Scale Inhibitor for Protecting Hot Water Systems

65% of the UK population is provided with hard water, which contains high levels of calcium and magnesium salts. This limescale builds up inside household appliances, causing them to run less effectively and increasing the likelihood of premature breakdown. By protecting against the build-up of limescale, it could also save up to £130 a year on typical energy bills, as scale also impairs the efficiency of heat transfer. Stocked by Go Geothermal the SESI is an electrolytic scale inhibitor, a cost-effective solution to help tackle limescale build up. It provides a long term solution which requires no maintenance and protects the whole house without introducing any undesirable chemicals to the drinking water.

Go Geothermal - Magnetic System Filters

Many untreated or improperly treated heating systems suffer from an accumulation of debris, collectively referred to as sludge deposits. Made up of corrosion products, water hardness flakes and installation or maintenance debris, this sludge can cause premature equipment failure or block/restrict system flow – directly reducing system life, efficiency and effectiveness.