Guangzhou Shincci Energy Equipment Co., Ltd. products

One integrate module: Heat pump + mesh belt + insulation board, easier on-site installation. Upgraded corrosion resistance: condenser, evaporator and refrigerant pipelines, heat pump support are SUS316L. Hot water/Gas/Generator waste heat can be utilized. Two modules share one belt-driven type blower, which makes cleaning and maintenance easier. Flexibility and efficiency on overhaul work:upgraded quick-opening type service access door.

Shincci Container units with a water evaporation capacity between 8 and 46 kg/h. Use electricity only; plug and use. 60~70C°drying temperature. Closed cabinet drying and no tail gas emission, friendly to neighborhood.

Facilitated on-site installation and better airtight performance: Heat pump + mesh belt + insulation board in one module. Condenser, evaporator and refrigerant pipelines all are copper, but advanced stainless steel. SUS316L heat pump support, improving product corrosion resistance. Easier cleaning and maintenance: two modules share one blower which is not under the sludge conveying belt. Quick-opening type service access door, and improved with unique airtight structure design. Longer service life: not in contact with circulating dry air, the compressor works in a clean air condition. Electronic expansion valve to increase dehumidification capacity.

Heat pump, Mesh belts and Insulation boards are all combined in one integratedmodule, which improves airtightness and makes onsite installation easier. Expansion valves adopted electronic type so as to increase dehumidification capacity. Heat exchangers and Refrigerant pipes are made of SUS316L instead of copper. Compressors are all installed in independent chambers, well- protected from the corrosive-gas to extend their service life. Two modules share one blower and the belt-driven type blower is installed in the Heat pump module instead of the mesh belts module, which makes cleaning and maintenance easier. Standard operation consumption is 240~300kw.h/1t.H20 (MAX). SUS316L base of dryer replacing aluminium alloy support, making sure a strong anti-corrosion performance. The service access door are upgraded to quick-opening type and improved with unique airtight structure design, making maintenance and inspection easier and effectively.

Low Temperature Drying: Meeting the superior quality requirements in low temperature drying.(7-22°C). Integrated Design: Convenient installation. Stainless Steel: The inner partition and outer shell are made of SUS304 stainless steel to satisfy with food drying. Dry Period:Short drying cycle. Energy Saving: Compared with other dehumidification drying products can save energy more than 40%. Product Range: Meet the drying requirements of different regions and industries.

Shincci™ Low Temperature Sludge dryer is able to achieve sludge volume reduction, stabilization, sterilization and reutilization. Its outlet dried sludge granule can be disposed with gasification, blended-burning, incineration; can be utilized as biofuel, construction material, cement material and landfilling material; It is applicable to transform any type of dewatered sludge (10% minimum dry content) into a dry, such as municipal, printing, dyeing, papermaking, electroplate, chemical, and leather, granulated product with a dry-solids content that can be adjusted within a range of 15% to 90%.

Normal temperature, Medium room temperature, Medium temperature, High temperature models.

Features: Integrated Design: Small footprint, can be installed with internal and external pipes. Large Moisture Discharge Design: Dehumidification capacity up to 200kg/h in rated working, rated water discharge above 4000kg  everyday, meeting the bulky drying design requirement. SUS304 Stainless Steel: The inner partition and outer shell are made of SUS304 stainless steel to satisfy with food drying. Customized by Non-Red Copper Pipe: Evaporator and condenser are made of non-red copper pipe, complied with special corrosive application environment. Closed-Type Drying Room: FL models can be designed in a closed drying room. Standard Rated Condition: Dehumidification performance ratio (SMER) is more than 3.5kg. H2O/kw.h.

Features: Condensation, dehumidification and drying. No waste heat emission, no pollutant emission during drying process. Closed drying mode, not affected by weather and area. Good sanitation and long-time for use. Save more than 40% than coal, more than 60% than fuel, and more than 70% less than electric heating. PLC and touch screen intelligent control. Matching drawer type tray design, and PP tray or stainless steel tray. The whole can be moved at will. Compact structure, small footprint; modular design, can be assembled in any combination.

Shincci dryers deal with the sludge (a semi-solid slurry: MC less than 90%), which is produced from a range of industrial processes, from water treatment, wastewater treatment or on-site sanitation systems. Sewage sludge from wastewater treatment processes accummulated scale is up to 8200T per day.