Gutter Mate Ltd products

This 3 stage rainwater filter is suitable if you are recycling rainwater to use for bathing, dish washers or drinking, to be used as part of your rainwater harvesting system. It offers one further filtration stage in comparison to the Rainmaster duo.

Collect rainwater from your roof to your water butt or tank. The award winning Gutter Mate Diverter & Filter. The only rainwater diverter which filters rainwater before it enters your rainwater storage.

The only rain water diverter and saver that diverts and filters all the rainwater before it enters the water butt,  the drain or soakaway.  The diverter then automatically shuts off the flow to the water butt when full. Standard rain water diverters do not filter the water and block very easily. Once blocked, cleaning a standard rainwater diverter is not easy, as you will have to remove the downpipe/drainpipe to access the diverter - this is not a job which is easily done by many people. Thankfully, collecting rainwater with the GutterMate is both simple and efficient, whether you are saving rainwater to a water butt, tank or a full rainwater harvesting system.

The Directional Diverter is ideal if you need to shut off the rainwater supply to your water butt or tank. In winter you don’t normally need the rain water or in summer if you are going away on holiday and you don’t want to save rain water, our Directional Diverter has a positive valve shut off for the water. It is a simple easy to use manual lever operated valve. The Directional Diverter can also be used in conjunction with the GutterMate Rainwater Diverter and Filter.

The Pump Discharge Inline Filter allows you to use rainwater with either your washing machine, toilet or for pressure washing cars or patios. The standard filtration is 300 micron, however higher degrees of filtration are available to 22 micron. With the finer filtration attention should be paid to the flow capacity of the filter and the regularity of cleaning which would be acceptable. The use of the filter on the discharge side of the pump is always good practice, especially when using the water in a pressure washer and when washing cars.

Collect rainwater from your roof to your water butt or tank. The award winning Gutter Mate Diverter & Filter. The only rainwater diverter which filters rainwater before it enters your rainwater storage.

Flexible corrugated clear plastic hose 20mm bore, £4.15 per metre.

The fine mesh insert provides fine rain filtration in an easy to install form.  Cleaning is just washing in warm water.

The reducer would normally be used on the main outlet of the Gutter Mate filter to enable the fitting of the filter into 40 or 50mm downpipe.

The flat underground rainwater storage tank is a high quality, rotationally moulded, one piece rainwater collection system that can be installed without using concrete. Easy and quick to install, this tank can be installed into much higher water tables than a standard round water tank, therefore minimising costs with a smaller excavation pit and preserving your garden. The tank shown is just indicative of the type of tank used. The actual tank will depend on site conditions and pricing. Gutter Mate is not responsible for determining if site conditions are suitable for an underground tank installation.