Himel Maschinen GmbH
5 products found

Himel Maschinen GmbH products

Storage Systems

Himel - Rectangular Storage Silos

Rectangular storage silos uses the storage space almost completely and provide solution for all space problems. Compared to round silos they provide up to 35% more capacity, and are flexible irregular floor plans and Accommodate ceiling heights. The silo plates measuring 1320x1030mm and are made of galvanized metal. Available in three different versions, normal (N), amplified (V), heavily fortified (SV). These can be built up to a maximum of 9.24m silo height. To achieve optimum use of space, semi-high silo plates 1320 x 485 mm to 1030 x 625 mm or be used for the silo increase.

Grain Systems

Himel - Bucket Elevators

Bucket elevators are installed vertically to a height of 30m as the central elevator. With low power requirement to reach depending on cup placement services from 25 to 120to / h (On request up 250to / h).

Himel - Aeration Blowers

Aeration blowers BLG are specifically designed for medium, large silos and especially for large area flat storage silos. BLG blowers have a very high efficiency and still run very quiet and stable.

Himel - Drum Sieve Cleaner

Drum cleaner HTR63-1 and HTR63-2, are simple and stabil Drum sieve cleaner with one or two cleaning drums. They improve the quality of the crop by the out-clean of coarse and / or fine impurities. About the inclination, the drum can be precisely adjusted to each product. When you clean the drum cleaner there are no oscillations, so that the cleaner can be placed on shelves made of wood. The drum cleaners require little input power.

Milling & Mixing Systems

Himel - Blower Mills

The GMS series blower mills carry milled grain meal in the gentle air flow up to 60 m wide. Ground material is from a long distance via hand-operated or motor-operated suction valves, a suction-feed device sucked with funnel or a movable suction-feed device. The HIMEL GMS is especially suitable for use in mixing systems and computer controlled grinding and mixing systems, but also for individual operation. Mix up to a rate of 3000 kg / h promoted the HIMEL blast mill through a Pipe in each HIMEL feed mixer. For conveying distances up to 60 m different blades can be used.