Hunke Manufacturing LLC products

Just like the saying goes, "big things come in small packages".  The R2 pump hoist (2,000 lbs pulling capacity) was designed with economy and versatility in mind.  Weighing approximately 1,200 lbs, the pump hoist was designed to mount on a half-ton pick-up. Fast and easy setup by means of a hydraulically operated self-supporting mast. This pump hoist is ideal for submersibles and small pump service. The winch motor is a scaled down version of the motors Hunke MFG use on our R36, 50T & 60T.  The piston motor allows for infinate variable speed control for exceptionally smooth operation.  The motor has an internal braking system which allows for a long life with little maintenance.

The 4,000 lb. capacity 3-4T is the most economical all-around pump hoist.  It`s low cost and simple construction makes it one of the best small machines available on the market today.  Fast and easy setup by means of a self supporting mast with two 3-1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps and windmills.  Weight is approximately 2,300 lbs. The open frame design allows for full use of the deck area. Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The 12,000 lb. capacity 5T is the most popular pump hoist.  It is extremely versatile with capabilities ranging from small submersible pumps all the way up to line shaft turbines.  Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps and windmills.  Weight is approximately 2,800 lbs. The 5T can be mounted on a 54" x 9` utility body or on a deck. The open frame design allows for full use of deck area for cargo and other work tools. Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The 12,000 lb. capacity 6T is a very popular pump hoist. Like the 5T, the 6T is extremely versatile with capabilities ranging from small submersible pumps all the way up to line shaft turbines.  Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps and windmills.  Weight is approximately 3,000 lbs. The 6T can be mounted on a 54" x 9` utility body or on a deck. The open frame design allows full use of deck area for cargo and work tools. The controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The 8T pump hoist with 21,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck. Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders. A guy cable is not needed in most situations. Designed to allow for easy access to hard-to-get-to pumps. Total pump hoist weight is approximately 5,300 lbs. A deck, headache rack and toolboxes add approximately 3,000 lbs. The 8T can be mounted on a 54" x 11` utility body or on a deck. The open frame design allows full use of deck area for cargo and work tools. The controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The 10T pump hoist with 27,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck. Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders. A guy cable is not needed in most situations. Designed to allow for easy access to hard-to-get-to pumps. Total pump hoist weight is approximately 7,000 lbs. A deck, headache rack and toolboxes add approximately 3,000 lbs. The 10T was designed to mount on a deck. The open frame design allows full use of deck area for cargo and work tools. Controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The 11T pump hoist with 33,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck. The 11T has all the features of the 10T except that it has higher load capacity winches. Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders. A guy cable is not needed in most situations. Designed to allow for easy access to hard-to-get-to pumps. Total pump hoist weight is approximately 7,000 lbs. A deck, headache rack and toolboxes add approximately 3,000 lbs. The 11T was designed to mount on a deck. The open frame design allows full use of deck area for cargo and work tools. Controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The 12T pump hoist with 33,000 lbs. capacity and a 36 ft. high telescoping mast is designed to mount on a 2 ton or larger truck. Fast and easy setup by means of a self supporting mast with four 3 1/2" bore hydraulic cylinders. A guy cable is not needed in most situations. The 12T design allows for easy access to hard-to-get-to pumps. Total pump hoist weight is approximately 8,700 lbs. A deck, headache rack and toolboxes add approximately 3,000 lbs. The 12T was designed to mount on a deck. The open frame design allows full use of deck area for cargo and work tools. Controls are conveniently located at the left rear corner of the rig and are accessible from ground level.

The R36 pump hoist. with 72,000 lbs. capacity and a 44 ft. high telescoping mast that is designed for fast and easy setup by means of a self supporting mast with two 5" bore hydraulic cylinders. A guy cable is not needed in most situations. Designed to allow for easy access to hard-to-get-to pumps. Both the mainline and optional sandline use motors are hydrostatically driven with infinite variable speed control for exceptionally smooth operation. These motors include an internal braking system that allow long life with little maintenance.

The 50T pump hoist is our second largest pulling unit with 100,000 lb. capacity and a 44 ft. high telescoping mast that is designed for fast and easy setup by means of a self supporting mast with two 6" bore hydraulic cylinders. A guy cable is not needed in most situations. The 50T was designed to allow for easy access to hard-to-get-to pumps. Both the mainline and optional sandline use motors that are hydrostatically driven with infinite variable speed contol for exceptionally smooth operation. These motors include an internal braking system that allow for long life with little maintenance.