Hy-Pro Filtration

7 products found

Products

  • Filter Element Upgrade

  • DFE - Rated Filter Element

    DFE - Rated Filter Element

    All hydraulic and lube systems have a critical contamination tolerance level that is often deifned by, but not limited to, the most sensitive system component such as servo valves or high speed journal bearings. Component manufacturers provide fluid cleanliness levels, per ISO4406 or ISO4406:1999, required for optimum performance and predictable life. An operating system is at risk whenever the critical contamination level is exceeded. Contamination...

  • Varnish Prevention and Removal

  • SVR - Soluble Varnish Removal Skid

    SVR - Soluble Varnish Removal Skid

    When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual suspect. SVR Soluble Varnish Removal skids prevent and remove varnish deposit formation in lube oil by removing oxidation by-products as they are formed and while they still in solution (dissolved). By removing the soluble varnish feedstock SVR is addressing the primary cause of varnish before varnish deposits can form.

  • Non Spark Discharge Filter Element Upgrades

    Non Spark Discharge Filter Element Upgrades

    Filter element spark discharge is a recognized cause of fluid degradation in hydraulic and lube oil systems creating soluble by-products and sub-micron carbon particles that deplete additives, cause fluid darkening and lead to varnish deposits. Oil formulation changes from Group I base stocks to Group II-III base stock oils has yielded fluids with reduced conductivity characteristics which enhance the effects of element sparking especially during cold...

  • Phosphate Ester Fluid Solutions

  • ECR Electrostatic Contamination Removal Skid

    ECR Electrostatic Contamination Removal Skid

    ECR electrostatic contamination removal system captures sub-micron carbon based particles that are the by-product of hydraulic and lube oil thermal degradation. ECR uses a high voltage electrostatic field and proprietary collector elements to remove the sub-micron particles. Typical causes of thermal degradation are pressure induced dieseling and element spark discharge. ECR will return phosphate ester fluid that has turned dark back to its original...

  • PF2 In-Line or Manifold Pressure Filter

    PF2 In-Line or Manifold Pressure Filter

    PF2 in-line or manifold mount pressure housing max recommended operating 4000 psi / 207 bar. Ideal for protecting servo valves and other low flow sensitive components. Available in bypass or non-bypass configuration.

  • F8 Medium Pressure High Flow Base Mount Filter

    F8 Medium Pressure High Flow Base Mount Filter

    500 psi / 35 bar max operating F8 housing features large DFE rated Hy-Pro coreless element in several designs including HP8314. Top loading housing is ideal for high viscosity lube oil and the port to port mounting dimensions are a match for industry standard 8300 configuration. Full flow bypass valve is integral in the housing top cover. Media efficiency options down to 1 micron absolute, water removal and stainless steel mesh are available.

  • Vacuum Dehydrators

  • Model VUD Series - Vacuum Dehydrators

    Model VUD Series - Vacuum Dehydrators

    Hydraulic and lube oil fluid contamination causes 75% of all hydraulic component and bearing failures. Increase plant reliability with the efficient Vac-U-Dry vacuum dehydration unit.