Hydroflux Industrial products

In industrial applications, screening is essential as the first stage of treatment to remove bulk solids that would otherwise increase the solids and organic load on downstream plant.

In industrial applications, screening is essential as the first stage of treatment to remove bulk solids that would otherwise increase the solids and organic load on downstream plant.

The HyDAF Dissolved Air Flotation (DAF) system’s simplicity and exceptional performance in industrial applications are just two of the reasons why the HyDAF is the Dissolved Air Flotation system of choice for primary industrial wastewater treatment today.

The Hydroflux GT is a unique product that will remove grease, oils and solids from commercial kitchen wastewater to allow discharge of the wastewater to sewer. It offers a lower footprint than traditional DAF systems and utilises almost half the power.

The VeeMax Chevron pattern sludge plow is designed for heavy, relatively viscous, sludges such as those in water treatment where flocculants are added or lime is settled.  The VeeMax  Chevron pattern, available in duplex or simplex configuration, plows furrows of sludge progressively toward the sludge hopper at an average tip speed of 3m per minute. The VeeMax sludge plow can be readily adapted to sludge thickening with the addition of the picket fence module.

While optimum angle is approximately 30° at a tip speed of 3m per minute, the Hydroflux Epco LogMax^® has an effective logarithmic angle range of between 15° and 45° and can travel at tip speeds up to 10m per minute. The LogMax hinge system allows each blade to be adjusted individually during installation for peak plow performance and reduced tank floor wear.

The HiFlow lamella separator is suited for use in a number of industrial wastewater applications such as anodisers, glass factories, tunnel construction, groundwater treatment, galvanizing plants, general industrial manufacture, steel, precious metal and mining.

Environmental water treatment systems for Groundwater, Construction Site Water and Mining Operations designed for discharge to the Environment, Reuse or Sewer

The AEROSTRIP® Fine Bubble Membrane Diffuser is a strip diffuser, for use in continuous and intermittent biological processes. AEROSTRIP Diffusers by AquaConsult of Austria have been in operation since the early 1990’s and are providing significant benefits to numerous wastewater treatment plants with over 2000 installation worldwide including many industrial and municipal plants throughout Australia.

Hydroflux HySmart® Sequencing Batch Reactor. SBR’s are renowned as being one of the most robust and reliable biological systems available for Industrial wastewater treatment including: