Icon Process Controls products

The FES Series Flow Switch is designed to detect liquid Flow or Low | No Flow. The FES switch encompasses a SPST contact that can be wired to energize a device when liquid flow either exceeds or drops below the set flow rate. The FES Series is an excellent choice for corrosive liquid services, water treatment, waste treatment, liquid pumping and process control systems. The FES Flow Switch can control devices such as pumps, motorized valves and alarm devices.

All in One Controller | NEMA 4X Enclosure. Input: 4-20mA or Voltage. 1 Relay + 4-20mA Output or 2 Relay Outputs. Input 120VAC | Output 24VDC to Power Sensor. RS-485 | Modbus RTU Standard. Signal Peak Value Detection. 3 Wire Cord Grips Included. 8 Levels of Brightness | Suitable for Sunny Locations.

X-Large Multi-Color | Universal InputsFlow | Level | Temp | PressureEliminates Need for Stack-LightsVi   sual Indication of Process Conditions.

Fit a Wide Range of Tubing Diameters – 1/4″ to 1/2″. Flow – No Flow. Non – Intrusive-Senses right through tubing. Mounting Bracket. All Plastic Design. Simple to Install. Tube Thickness – Heavy Walled Low Voltage. Light weight. Very Accurate. Perfect for Dosing Pumps – Metering Will.

Fit a Wide Range of Tubing Diameters – 1/4″ to 1/2″. Flow – No Flow. Non – Intrusive-Senses right through tubing. Mounting Bracket. All Plastic Design. Simple to Install. Tube Thickness – Heavy Walled Low Voltage. Light weight. Very Accurate. Perfect for Dosing Pumps – Metering Will.

All Plastic PP Design. Non-intrusive Liquid level. detection through plastic or fiberglass walls. Small Footprint / Easy to Install. M12 – Disconnect or Fixed Cable Connector. Measure up to 2″ Pipe Diameter – Sch. 80 – Senses up to 0.3″ / 8mm Wall. Thickness.

ProPulse provides superior performance and delivers accurate Ultra Low Flow measurement that is highly repeatable under the most demanding of industrial environments. The ProPulse Series consists of one universal body that can be customized into four (4) selectable flow ranges. Changing from one flow range to another is simply achieved by inserting a very precise flow jet, no special tools required for change out ...truly Plug and Play. The ProPulse operates using a PVDF rotor with encapsulated magnetic inserts which rotate on a long wearing set of sapphire bearings designed to provide years of reliability. As the rotor spins the magnetic field produced by the magnets is pick up via a Hall Effect Sensor which converts the rotation into a square wave NPN pulse output that can be sent directly to a metering pump or local display.

The Ultraflo 45i series flow meter is designed to measure the volume of clean liquid media using ultrasonic technology. The Ultraflo 45i can measure both conductive and non-conductive liquids. The Ultraflo has no moving parts and is absolutely free of wear. The unique body design minimizes dead space over the whole geometry. All wetted parts in contact with the medium are constructed of HD-PE virgin material. The Ultraflo 45i is characterized by its high repeatability and measurement accuracy

The UltraFlo 4000 utilizes ultrasonic technology as is capable of measuring both conductive and non conductive liquids, It is an excellent chose for very corrosive liquids such as strong acids and alkalies. The UltraFlo 4000 has no moving parts and has been engineered to measure pulsating, dosing as well as metering flow. All parts that contact the liquid are made of corrosion resistant Polysulfone.

The Stainless Steel 300 Series Pressure Transmitter is Designed for Continuous Level Measurement in Water/ Waste Water, Fuel, Oils, Solvents